Skype video freezes after 30 seconds...

Similar Questions

• WITH video card driver, windows freezes after 10 seconds after the Welcome screen, WITHOUT a driver, it works fine

  Hi guys,.

  I recently had the problem that when I start my computer, it freezes after 10 seconds when I saw the Welcome screen.
  I'm in safe mode, it works perfectly fine. I have uninstall ALL my Nvidia drivers and then restart the computer in normal mode, and then everything works fine. I go to the Nvidia website again, download the latest drivers and the same freezing problem happens again. I also tried with older drivers provided by Nvidia, still the same problem.
  Completely, I formatted my HDD and reinstalled Windows 7. I install drivers Nvidia and the same problem again.
  I have a Nvidia Geforce 250GTS
  The processor is Intel Duo Core converted E6850 (boxed)
  4 GB of Ram DDR2 Ram
  East of card mother ASRock G31M-S

  Everyone knows that the problem is?
  Thanks in advance and sorry for my bad English, I tried my best :)

  Hello.

  The video card drivers enable the features of the card to use.  When in safe mode or with no driver installed only the basic functions of the card are used.  If the card is faulty, which is more likely, the defective part of the map has probably come into play with the full drivers installed.  This explains why it works with the Basic setting.

  See you soon.

• Video freezes every few seconds

  I just bought first elements 14. I bought a subscription to Lynda.com to get up to speed on the program. For several days, the apprenticeship program. So now I'm ready to start editing. I load three videos in the assets of the project. One is a long hours MP4 video which is 6 GB. My system has 8 GB of memory. When I open the video 6 gig in the mower, the video freezes after a few seconds. I tried to put it on the timeline, and it crashes after a few seconds. I tried to cut everything, but a minute or two of the video and it freezes. Then I reduced the resolution of the screen down to 1080. Always freezes. I cut the long video out completely and tried to edit a three minute video. It freezes every few seconds.

  So now I think there must be a problem of memory because of the long video. I left out of the program. Did not save the project. Has started a new project with the short three-minute video. Opened in the window of the mower and began to play the video. It freezes after a few seconds. I'm on Windows 10 64-bit with a processor I7 3.4 ghz. What Miss me?

  Could be the Organizer.

  Just double click in the project window active to import images.

• Smartphone blackBerry bold 9900 freeze after 10 seconds of running

  After my bb bold 9900 stayed in mentinance for more than a month for a white screen problem and after I had funlly and it was running smoothly

  but after I restored my data from a file backup and update my app world it restarted and it works for 10 seconds only and freezes

  someone know how to fix knowing that I tried to reboot in safe mode and yet it freezes after 10 seconds exactly

  I was able to solve this problem by removing the world app via blackberry desctop Manager

  but yet, I need the world app one facing this problem?

  I restarted the phone while its connected to the Manager of desctop and got to applications and removed the app world

  After that, the phone worked probably

• Firefox 16.0.1, videos youtube freeze after 2 seconds. FF injuries.

  Videos YouTube freeze after that 2 seconds... audio game continues for 5 seconds on it. The whole browser stops responding and I have to ctrl + alt + delete at the process level to close FF16.

  After that I uninstalled my customized version, so BONE STOCK FF16 is miss you, this is a new installation. I tried the current version flash 11.4 and 11.2 flash version to get my problem is solved.

  NO ID CRASH. No formal don't crash in itself, just a browser totally unresponsive.

  By the way... Chrome works youtube without incident. WTF.

  In addition, this problem does not exist on my installation of Waterfox... a variant of 64 free bits of 15 FF. Maybe I have a sort of x 64 issue. I think that maybe that's the problem with the standard 32-bit version of FF16. Ask me again why this happened in the first place.

  I run McAfee OAS Business Class A / V, never had a virus or something in 4 years.

  SOLVED. Watefox is the only way it seems. Needs of Firefox to fix this flash on its own it seems.

• Published video freezes after a few seconds

  I've been recording videos of screenshot with BB Flashback recorder Express 5, but the resolution of the original window was 1223 x 688 due to the limits of game and the screen. Exported from BB Flashback Express 5 .fbr format using the Codec Xvid MPEG-4 with the profile Xvid HD 720, as a .avi file, which plays very well in one of my video playback applications.

  I try technoscientifique it to the format 720 p (1280 x 720) for YouTube, using the first of 12 elements. If I do not do this, YouTube converts 480 p, which is far too low a resolution.

  I tried a few different profiles (the value prior to importing the video to the elements), PAL HD 720 and another similar, I forget. The result is the same in any case.

  Also, I was separating the sound using VirtualDub because with the original .avi, first sees only the sound for the first 17, then disappears, then I put the sound a separate track and defining the sound in the original video track from .avi to 0dB.

  I am publishing under .mp4 AVCHD, 1280x720p, high or medium, flow rate up to 17Mbps target of 5 or 10 5, audio 320 Kbps.

  The imported video plays fine in ss12, but the published video file freezes after 17 years, while the sound plays (I guess since my extra audio track). It's the same in all of my reading of video applications (MPC - HC 32 & 64, VLC, Media Player, movie & TV, ss12).

  The same thing happens with more than one different video file of the same recordset (for example, I recorded part 1, part2, etc., of the gameplay). They all do the same thing.

  I guess there must be something wrong with the original files... but I can fix it? If so, how? Or y at - it another way to convert my first .avi in 1280 x 720?

  Thank you!

  XviD is a format for watching only not publishing, that is why the issue of freezing.

  Use a format that like elements.

  If you set the format use something like avi with Lagarith codec.

  Lagarith Lossless Video Codec

• Skype on Sierra - after 12 seconds of appeal stands - I can't hear your voice.

  Hello

  I have a big problem with my Skype.

  After that 12 seconds of appeal stands - I do not hear voices, but my client hear me.

  I run echotest, but even call echotest of break after 12 seconds.

  The steps:

  Uninstalled SKYPE cleaner and installed the latest version - did not help.
  I uninstalled Skype cleaner installed an older version - it did not help.
  I changed the method / extra internet connection (cable and my LTE network)-did not help.
  I changed the settings, turn off and turned on the macbook, nothing--has not helped.

  Sorry for my bad English.
  Help, please.

  Best regards

  Simon

  I've solved a problem!
  Problem was in the firewall settings!
  Turn it off completely for a while. It helped!
  
  Topic that you closed.
  
  * For those who have problems:
  Please check your firewall settings after the update of the Sierra.

• Win 8/IE 10: video Flash in mode full screen in dual monitor; video freezes on the second monitor

  All,

  At the launch of a Flash video in full screen when you are using two monitors, the video freezes at a still image on the second monitor. This happens in mirror and screen extended mode images.  The video continues to play normally on the first screen, and the audio continues normally as well.  This problem appears only during playback of the video using Internet Explorer, do not not Firefox.

  This seems to be a software problem, not memory or devices.  To be clear, the video is not stutter. rather, it freezes at a still image. I didn't have this problem using internet explore with the same configuration until I upgraded my laptop Windows 8.

  Here is my configuration:

  Windows 8. Internet Explore 10.

  Shockwave Flash Object: 11.6.602.167

  ASUS laptop computer connected to a HD LED TV via HDMI.

  GeForce GT650M graphics card.

  Core i7 and 8 GB of RAM.

  You think, what is happening? Troubleshooting ideas? Thank you.

  I just gave it a try on my setup triple monitor, but could not reproduce the problem.  I tried both stretching and duplicate the work stations, but they all work as expected.  If Firefox works well, then I wouldn't suspect your video driver but it is probably useful to take a look without worrying to do of course, you have the latest driver installed.  Then, try to temporarily disable hardware acceleration to see if that makes a difference.

  How to disable or enable hardware acceleration?

  http://support.Microsoft.com/kb/2528233

  Using IE in desktop mode or modern/metro?

  Thank you

  Chris

• Captivate 5.5 - event video freezes after completion

  Hi all

  I am trying to create e-Learning courses.

  I want to have a video in a slide. Here are my requirements:

  (1) video should be a video of the event.

  (2) I need to control the video of the event with the controls of the player project is to say there should not be two player controls

  (3) at the end of the video, the course should go to the next slide

  Note: I can't insert video slide corresponding to the duration of the slide. The goal is to use the video of an event like video slide corresponding to the duration of the slide.

  Test 1: I've selected calendar as "precise moment" and enter the value equivalent to the duration of the video. Also check the 'synchronize with the project.

  Issue here is that, whenever it is buffering, time differences and the progression to the next slide slide, before even the video ends

  Test 2: I selected the date in the form "video time" and checked the 'synchronize with the project.

  Issue here is that the project is frozen after the end of the video and does not progress to the next slide. Even the manual control of 'Fast forward' or 'Play' will not work.

  Tried to change the blade that is identical to the duration of video duration timing less than video and more video. There is no use.

  I understand that it's complicated. Any idea or suggestion to remedy this problem?

  Thank you and best regards,

  Bruno Arunjunai

  Hi all

  I couldn't find the reason why even the video hangs after completion while setting the date in the form "duration of the video.

  However, I found the means to my needs.

  I added the video of the event. Hourly, has selected rest of slide and disabled the "slippage to break until the end of the video" checked synchronize with the project.

  From now on, there is no problem.

  Thank you best regards &,.

  Bruno Arunjunai

• video freezes after a few seconds

  There are a couple of months, this problem started: on Facebook, when I run a video, it plays for 2 to 4 seconds and then freezes. Nothing I can restart it. If I go on You Tube, I get the same problem, if it runs a little longer, about 11 seconds. On rare occasions, a video will play. I can find no reason for this.

  I have disabled hardware acceleration and I disabled all my plug-ins and extensions (including AdBlock Plus) and restarted Firefox, but the problem remains.

  I am running Windows 8.1 with Firefox 34.0.5.

  Any help would be appreciated.

  Hello

  Sorry to hear that you're having trouble to show videos.

  Looks like you've tried some very good troubleshooting to fix yourself. I wonder if you had a glance through this article?

  • Flash Plugin - maintain and troubleshoot

  Work your way through the troubleshooting steps in the article and let me know how you go.

  Tim

• Acrobat Pro XI freezes after 60 seconds to view a PDF file

  When opening and view a PDF file in Acrobat Pro XI he will freeze and 'unresponsive' after about 60 seconds. Type and size of the PDF don't matter.

  Hello

  Could you please tell the operating system, you are working on?

  Do you feel it work with all the PDF' or ' with specific model?

  Only the PDF freezes or when you launch Acrobat, only freezes as well?

  If you're windows, I recommend you to repair the Installation of Acrobat if possible.

  Launch Acrobat (not PDF) > Navigate to Help > repair the Installation of Acrobat.

  Hope this will fix.

  Concerning

  Sukrit diallo

• CS3 - video freezes on the Capture and playback - please help!

  Hi all

  Here's the problem:

  When plans to capture via firewire Mini DV, shot in DV standard, within a standard NTSC DV Widescreen 48 k project, the picture freezes after 1 second.  You can still hear the audio and images actually get caught.  However, after the sequence has been met, and load us the clip in the Source window and press play, the video freezes after 1 second game again.  Once again, the sound continues to play and you can move the cursor anywhere on the clip and see that all the images are there, but as soon as you play from any point - the same thing, the picture freezes after 1 second of game, which makes editing impossible.  The clip is captured as a .avi and all acquisition settings appear to be correct.

  Here are the best:

  -HDV video captures and plays back.

  -DV videos entered correctly at the beginning, this has been a recent problem going on now for several weeks, after no change in the system.

  -The biggest kicker - after trying successfully capture, playback and video editing, we closed first, has reopened, has tried to play the previously captured DV sequences and he plays very well suddenly in HDV !  Then we closed the program, reopened and tried again - back to the gel problem and he never played back fine still...

  Here's the specs (I can give more details later if necessary, it's computer of my partner):

  Sony PD-150 DV - Cam (but record on Mini DV in mode standard DV, DV - Cam no)

  Windows 7

  Intel Core i7 3,20 ghz

  Asus X 58 motherboard with onboard Audio and Firewire

  6 GB of Ram

  NVIDIA Geforce 9 Series with PhysX

  Please help if you have an idea how to solve a problem crazy like that.  Thank you!!!

  Greg

  you have windows updates turned on? Sometimes the updates can mess things up. turn off if its on.

  try to disable physx and see if that helps... you don't have that with the exception of the games.

  try to activate hardware acceleration a notch... see if that helps.

  the graphics card is overclockee? If so, go back to normal speed.

  Defragment your hard drives, including the pagefile - get rid of something not necessary on your drive (s) to give you as much free space as possible (before defragmentation)

  Update your video adapter driver to the latest version. something might have messed up the driver...

  If you have a heat on the map problem, it could be a factor...

• Video recording will stop after 33 seconds

  I bought this because I was always running out of space on my iPhone 6plus. I tried to use it today to record the events of my daughter.  When I went back to see her, she stopped after 33 seconds.  I tried to take another video and the length was 33 seconds.  I decided to watch the next time.  I started the video and after 33 seconds, the Red changed record button but the meter continued as he was recording.  When I watched the video, it was 33 seconds.  I did a few tests more.  The video has stopped saving to 33 seconds every time, but the continuous meter.  Everyone knows this or make me a bad device?  It is an iXpand of 128 GB USB 3.0 for my iPhone.

  I'm tempted to simply return it.

  I spent about an hour with the support of SanDisk today.  They were able to reproduce the issue and it is related to the amount of storage left on the phone.  When I started, I had about 340 MB of free space and which equated to about 33 seconds.  I deleted some apps, so I had about 840MB and it allowed me to save up to 6 minutes but it stops again.

  I'm a software developer so that I can sort of guess what happens.  As can imagine you, it is quite possibly using storage phone (a cache?) when recording and when it stops, immediately transfers the video to disc.

  I wouldn't have a problem with this behavior as a long time I didn't know that it was a restriction.  I bought this because it says, you can record directly to disk iXpand.  128 GB is a lot of video.  Unfortunately, with the current limitation, I'm in the same position as I was before the training.  I have to remove applications whenever I want to record a lot of video.

  Another anomaly, I noticed.  When the application reached the memory limit, it will stop recording but the ticker keeps it turns out that it is still recording.  This is obviously a bug and needs to be repaired.  You would think that there should be a way to clear the cache on the disk while recording, so he isn't running out of phone storage space.  If I were writing the application, I would check to see what my free space on the phone, then make sure that I took an amount of cache, which was less than the amount of available space and then continue to clear the cache on the disk I was recording.  This would require a couple of threads and I don't know if the OS is multithreaded or not.  I hope it is, but there may be a limitation there too.

  Support said they would escalate this problem and inform me of any solution, with which they came.  I'll mark this as answered, but I'll try to update this thread if they come up with a different solution.

• Video freezes and stays frozen

  Hello

  Each time, I use Skype my video freezes after a few seconds. Sometimes it will unlock after a few minutes and sometimes not at all. I am currently using Skype 6.21 and have a logitech c270. The c270 works very well with my laptop. I would be very happy any help that could solve this problem. Thank you.

  Here's my DxDiag and newspapers.

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Inspiron N7110 - video freezes / audio stutters / CPU use spikes

  Hello

  Recently, I'm having a problem watching videos (on my laptop and internet). The problem is that the video freezes for a second, while the audio stutters. What I also noticed is that with this problem, the resource monitor displays this: http://img834.imageshack.us/img834/7656/freezingr.jpg .

  When he first started I thought it was a cooling problem, because my CPU cooling fan had become very noisy. Well, I changed the fan and the continuous problem bothers me. I did a few other things to try to solve this problem: uninstalled and reinstalled the Intel HD Graphics driver, ran chkdsk - both does not solve the problem. I ran a full diagnosis of Dell in http://www.dell.com/support/Diagnostics/us/en/19/ , but he did not take questions. I googled the problem, but I was not able to find a solution. I'd appreciate any help. My laptop is that 8 months.

  Hi Rolland666,

  Have you installed Dell Intel drivers support site video fron?

  Update the BIOs on the computer.

  Click on the link below to update BIOS:

  http://Dell.to/13kNGMc

  • During the update of the BIOS, check that the computer is connected to an AC adapter.
  • Disconnect all third-party devices connected to the computer before performing the BIOS update.
  • Do not turn off the computer during the BIOS update.
  • Do not restart the computer during the update of the BIOS.

  Note: Plug your computer into a wall socket, work before update you the BIOS. If you experience a loss of power or voltage important sag/tip during the BIOS flash, you will need to either buy a new BIOS chip or buy a new motherboard.

  In addition, run hardware diagnostics on the computer. Restart the computer by pressing the power button FN and at the same time. Let the full diagnosis.

  Waiting for your answer!