SL1 Canon DSLR: setting for recording movies from a tripod

I intend to use a tripod to record sometimes a group of us during the holidays and would like to know if the SL1 provides any kind of recording video delay start (like 2 or 10 seconds) and the record time (like 2 minutes) film. -just enough time for me to get into the film.  These features are available on the SL1 barrel?

If so, what are the parameters to define a record start delay and limit video time recording film?

If not, what are the alternatives?

I know that I can use the RC-6 remote control to activate the record on and outside, but I was hoping that I could do something with the integrated thus delay.

Audit and thanks,

Mike

There are wireless remote controls that can be used for this - but I don't think that you can set a delay timer as you can for the shots (and of course, you'd still stop the recording when you're finished.)

Since this is the video, just start the video rolling... and edit forward later (since you probably want to edit your clips anyway).

Regarding the registration deadline... Yes there are two limits.  The camera cannot record a video clip alone (without interruption) for more than 29 minutes and 59 seconds.  In other words... 30 minutes is a strict limit.  It is political and NOT technical.  Through the trade agreement, if a camera can record videos for more than 30 minutes then it must be classified as a 'video' camera and priced at a higher rate.  If it is limited to the records that are less than 30 minutes, it can be considered as a camera so the rates are lower.  It is a stupid restriction - but imposed by Governments who are negotiating these agreements.

The OTHER limit is the size of file and it's a technical limit even if you're unlikely to run in it.  The memory card is formatted as a FAT32 of MS-DOS file system.  It is what allows the same memory card compatible for playback from a PC or a Mac, or even a computer running Linux, if you prefer... and they can all read the card without the need for proprietary drivers (no license fees come into play here).  BUT... the FAT32 file system maps the files in a way that limits the maximum size of a single file to 4 GB. It is probably much more likely that you will be able to run within the limits of 30 rule minutes that the size limit of 4 GB.

Tags: Canon Camera

Similar Questions

  • No video but able to hear the audio for downloaded movies from Frostwire

    Original title: no video

    I downloaded a movie from frostwire, in my frstwire library but when I try to read all the that get is sound and no video.  what I am doing wrong?

    Hello

    1. How do you try to play videos on the computer?

    2. which video player do you use to play the videos?

    3. the problem occurs only for a particular video or videos?

    4. What is the format of the video you are trying to play on the computer?

    The content probably uses a compression codec that is not installed on your computer. To ensure you have all the codecs installed on your computer that are currently supported.

    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

    Please provide more information to help you best.

    See also the link to support Frostwire.

    www.FrostWire.com/support

    Note: this response contains the reference to a third party software. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  • AppleScript for recording video from webcam

    Hello

    I'm new to applescripts and I am writing a script to record from webcam to say X seconds. I use the script below, but I get an error that I don't have permission to save this file on the desktop. How can I avoid this error? Secondly how can I save the file with timestamp added in the name of the file.

    Thank you very much in advance, this is my first post in the community

    tellapplication "QuickTime Player"
      set newMovieRecording to new movie recording
    
      tell newMovieRecording
      start
      delay 5
      pause
      save newMovieRecording in "/users/rohitbhutani/desktop/movie.mov"
      stop
      close newMovieRecording
      end tell
    

    Hi rbhutani,

    First of all, you must have written

    newMovieRecording Save to POSIX file ' / Users/rohitbhutani/Desktop/movie.mov '.

    Instead of

    newMovieRecording record in ' / Users/rohitbhutani/Desktop/movie.mov '.

    Then, to save the file with timestamp added in the name of the file, you can do the following:

    the value theCurrentDate to the current date

    value dateTime to short date string of theCurrentDate & space & time chain of theCurrentDate

    game of theFilePath to "/ users/rohitbhutani/Desktop/film ' & dateTime &".mov ".

    say application "QuickTime Player".

    the value newMovieRecording to record new movie

    say newMovieRecording

    beginning

    period 5

    pause

    newMovieRecording Save to POSIX file theFilePath

    stop

    newMovieRecording close

    end say

    end say

  • Change the default setting for "record and column headings display.

    Is there a way to change the value of dafault for table 'Folder and column headers display' property for ' as lines separate.

    Need this setting at the default for all new tables/analysis in OBIEE 11.1.1.7

    BR

    Morten

    We did some of this 'default piracy' at the beginning of 11g, but this option for example is nested too deeply in the bowels of OBIEE, so I wouldn't try (it will be a waste of time because it won't work).

  • Recovery of a computer disks can be used for another move from XP to Vista?

    I bought an HP computer a few years back with windows vista home premium, when I started it told me to do a series of witch of recovery disks that I made. Also, I have a laptop that is running windows XP Professional and want to put windows vista Home premium on it. So, are these recovery disks that I made my copy of vista Home premium? If this is not the case, how can I get the copy I paid? and if they do I use to install my vista on my laptop? If I can, how?  Thank you

    Hello

    You cannot use the recovery discs HP computer did you to install vista on your laptop

    read this

    ·                        as your vista is preinstalled on the HP machine it is an oem license and cannot be transferred to another machine

    It is linked to the original machine on which it is installed

    If he had a license of vista of detail that isn't there could have been transferred to another machine

    but it can only be installed on a machine at any time

    the rule is: A windows license = a windows installation

    You can use your HP recovery discs that you made to reinstall vista on your original HP computer

    and that's all you can do with them

    Microsoft sells more vista

    they moved on windows 7

    You can find a copy of vista and license left to a computer repair shop

    also read below on windows 7 price

    http://www.microsoftstore.com/store/msstore/en_US/list/parentCategoryID.44066700/CategoryID.50726100

  • not the case in the present site gives a phone number to explain my contract, I can move from one computer to another? How can I set up for printing to Adobe

    Not the case in the present site gives a phone number to explain my contract, I can move from one computer to another?

    How can I set up for printing to Adobe

    So far, it is not necessary for a person no-tech.

    If you have a normal single-user license or subscription, you are allowed to have two active facilities as long as you use only one of them for the software at the same time.  You can disable and re-enable them if necessary to install on another machine.

  • How to import. MOV files in Adobe After Effects, I am using Canon 700 d for filming

    Hello

    I just brought a 700 d canon and began shooting HD movies, but now I want to add some effects in my video for example Twixtor slow motion effect, but I am facing a problem that I can not import. MOV in Adobe AE CS4 file. Please help me. Also if you can tell me any free Converter. MOV to AF file format.

    I use Windows 8 OS.

    Thank you!

    CS4 is much older than Windows 8. CS4 is supposed to work on XP or Vista. It runs on Windows 7 was a bit of a problem, so I'm pleasantly surprised to hear that you have CS4 running on Windows 8 in all.

    It is also possible that a new camera records in a codec that does not include such an old version of AE.

    Make sure that you use the last update of your version of AE. You are on version 9, so make sure that you have completed the Adobe After Effects CS4 9.0.3 Update (I wouldn't update in the middle of a project, that any change could break AE). I want to reiterate: you are using a version that was published there is an operating system that was much more recently published six. So be careful how you strip rolling. However, if you are not running 9.0.3, you are missing some bug fix updates that might solve your problem.

    I would say that upgrading to a newer version of AE.

    That being said, as Dave mentions, CS4 and earlier had a lot of trouble with the MPEG-4 and other codecs that uses interframe compression. You can open the files in your version of first? If so, you can use the first or Adobe Media Encoder to convert into a good intermediate codec. MOV is just a container format. QuickTime with the PNG codec will work in After Effects CS4 with no problems, just like the other codecs that Dave mentions.

  • How to play movies from memories in pictures for Mac?

    In iOS, there is a button to play movies, memories, but on my Mac, there is no such key.

    Memory starts to play, but is not full screen.

    How to play memory as I can on iOS?

    Also, memories can be shared from my Mac on shared albums and/or sync with my iOS devices?

    Thank you

    Hi Jerry,

    Thanks for posting your questions here in the Community Support from Apple. I see that you are curious about the visualization of your memories on your Mac. I'm happy to help answer your questions.

    It seems that it's not possible to watch movies from memory to a Mac. Take a look at the following information:

    Memory movies only work on your iPhone, iPad, iPod touch and Apple TV. You will see films of memory on your Mac.

    To answer your question on the sharing of memories, take a look at this information:

    Save and share your favorite memories

    You want to save a memory for later? Scroll down to the bottom of the screen and tap or click Add to favorite memories. You can find it in the album favorite memories from your Photos app. If you decide that you do not want to save a memory, tap or click on remove from favorite memories.

    When you add memory to your Favorites, preserve you and keep to go far when pictures creates new memories.

    You can also share your experiences with family and friends. On your iPhone, iPad or iPod touch, you can share movies of memory as you would share any other video. Read a movie memory, then tap to display the options for editing and sharing. Type and choose to share the movie via E-mail Messages, iCloud, sharing photos, Facebook, YouTube and more.

    On your Mac, you can share photos and videos that are contained in a memory. Click on to share through email, Messages, iCloud, photo sharing, Facebook and other.

    You want to make sure that you follow these steps for memories to be synchronized between your devices:

    Before you start

    Update your iPhone, iPad or iPod touch iOS 10 or later and your Mac for Sierra macOS or later.

    If you want to get the same memories on all your Apple devices:

    1. ICloud implemented on all your devices.
    2. Connect to iCloud with the same Apple ID on all your devices.
    3. Turn on iCloud photo library on all your devices you want to use with memories.
    4. Update your Apple TV (4th generation) tvOS 10 or later.

    Enjoy your memories in pictures - Apple Support

    See you soon!

  • VIXIA HF M50 - best setting for sports (basketball) record

    I've been recording for a few years with my camcorder.  I think I was using the default settings, at least I don't remember changing anything whatsoever.

    Last week, I had to record record two games at the same time, so I had someone with my digital camera of Nikon in video mode and I recorded the other games, as usual.

    When compairing the two records, the video of my digital cameras has much better color.  The file size is a bit larger still too quiet.

    Someone at - it a setting recommended for registration of home basketball games.

    Hi cpuetz!

    Thanks for the post.

    Set the camcorder to manual mode (M), and then follow these steps:

    1. Press FUNC
    2. Select [REC Programs].
    3. Select [SNA: Portrait].
    4. Change the setting for [SNA: Sports].
    5. Press [X] to exit.

  • Could not import the music downloaded from iTunes for Windows Movie Maker.

    Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

    Hello
     
    Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
     
    Import video, photos and audio on Windows Movie Maker
    A problem of importing files into Windows Movie Maker
     
    Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
    You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
    For more information, see the link:
    Hope this information is useful.
  • Move from Mac to? For Web development

    OK guys, I'm about a possible switch. I am a business owner who uses the computer Mac for our work. Lately I've been do want to eventually move from our beloved Macs once to another system. So my questions are the following:

    1 will be wise to switch to Windows if Mac is what we are accustomed to?

    2. Although I used to use Windows computers several years back. The interface is so different now. What is the learning curve that I will face?

    3. If I choose to go with a Dell system, what would be the best for web development and even a certain creation of mobile applications. Please, if possible give me more information on all the options of Dell.

    4. who use Dell for their web development, and why is it a better choice than Macs.

    A consultant will help you. Thank you very much!

    Chris Hines

    vineclick.com

    Every Mac since 2006 run windows natively. (this isn't a PC virtual but rather native windows)

    IOS application development is done on Mac afaikt.  If its android or another platform then mac is not mandatory.

    Its a draw upward as much as that of something because everyone including apple returned to exclusive pieces.

    My personal preference for development and other work is systems Mac Pro from 2006 to 2012 and Dell Precision Systems of the A380 to the 3400 and 3500 Series.  The T3500 being very close to the nelahem 2009 mac pro in the processor and chipset and ram etc.

    For my personal stuff, I use a mac pro 2009 or 2010.

    When my clients ask me what to do, ask them how much money they have.  Then I suggest T3400 or workstations precision T3500 with a specific 960 GTX video card that works very well with BIOS A09 on the T3400.  The reason why I buy used T3400 or T3500 which is so I can spend money more on Ram and disks and windows etc.  There are ways to get a legal copy cheaper Pro 8.X.

    For less than $500, you can have a machine 64-bit windows 8.x EVGA GTX 02 G-P4-2966-KR 960 2 GB 128 - Bit GDDR5 SuperSC ACX 2.0 + video card and 4 GB of ram or more.

    http://www.Newegg.com/product/product.aspx?item=N82E16814487091

    If your mac is at least 2009, it will run windows 8 and probably 10. I have run windows 8 Professional 64 bit on my 2009 Nelahem Mac Pro Tower.

    Wizard Boot camp is free on all Macs.

    Your copy of windows is not.

    The original version of windows is not adapted to a corporate domain environment.

    The original version of windows is $ 109 and the pro version is $ 199.

    Windows 8.1, it is what is now available and windows 10 out July 29, 2015

    You're not giving anything on a mac, you have a dual-boot 2 OS machine.

    The most ironic thing for me it's easier machines on Earth to install windows on a Mac.

    https://support.Apple.com/en-us/HT204048

    Mac current back to 2009 or 2010 bootcamp 5.1 support aka windows 8.

    Supported Windows version
    These are the supported versions of Windows (authentic, unique, full-facility). See the tables below to see which of these versions will work with your Mac.

    • Windows XP: Home Edition or professional with Service Pack 2 or Service Pack 3 (Boot Camp 3)
    • Windows Vista Home Basic, Home Premium, Business, or Ultimate, Service Pack 1 or later (Boot Camp 3)
    • Windows 7: Home Premium, professional or ultimate (Boot Camp 4 or 5.1)
    • Windows 8: Windows 8 or 8.1, Windows 8 or 8.1 Pro (Boot Camp 5.1 only)
  • Is it possible to move from win 7 Home Basic for win 7 premium version?

    Is it possible to move from win 7 Home Basic for win 7 premium version

    Original title: win 7 upgrade

    No, anytime updates are available for most (but not all) Win7 Starter, Win7 Home Premium & Professional Win7 computers. See http://windows.microsoft.com/en-US/windows7/help/videos/upgrade-to-another-edition-of-windows-7-by-using-windows-anytime-upgrade

    Windows Update has nothing to do with the upgrade of Windows. Please post future questions about upgrading a Win7 computer in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_install-windows_7

  • When I try to move a file of premises for the sign from cloud to cloud still negative?

    When I try to move a file of premises for the sign from cloud to cloud still negative?

    Hello

    Please see useful fair questions: where can I find links to management and creative Cloud files synchronization?

    Hope that helps!

    Kind regards

    Sheena

  • Android app for watching movies and music from PC directly to AT100

    do you know if there is an application for watching movies and music to my pc directly on my Tablet? such a mediacenter?

    Hello

    You can use the direct application of VLC on Android google play store.
    Also, the drive for Windows must be installed on your PC.

    Second option, you can use the VLC Stream & convert Pro Apps

  • What is the best way to record movies on PC and change the names of video files?

    Names of files dvr - ms MCE?

    I use Win XP, SP3, MCE 2005 and I want to change the file name of some of the videos saved on my computer.  Currently I use MCE to record movies at home on my computer and then burn them to DVD.  I plugged the VCR/camcorder for video on computer TV card and MCE set to record 1 channel at say 20:00 and turn my VCR/camcorder to play at this time.  MCE records the film as if it were a recorded TV show.  A few questions:

    Is there a better way to do it?  The home movies are on different formats - Betamax, VHS, camcorder Sony 8 and mini DVD.

    The file is saved with descriptive as - news channel 1, channel information (Direct TV channel label), 20:00, 2 h,-where is this kind of things saved info and I can change it?  If I can change it, what format should I use?

    The video file is saved in C:\Documents and Settings\All Users\Shared Documents\Shared Video\... and the name of the file to this location seems to match the name of the actual file displayed in MCE - but if I want to change to say "Christmas" birthday 2005, can I do without corrupting the file?  What format constraints are there for the name of the file?

    Is there a better way to change the description and the name than just using windows and right-click on the file and selecting rename?

    And just to repeat the first question - is there a better way to record movies on the computer?

    Thank you

    Scott

    Hi Scott,.

    According to the research, the method you follow is the best way to record movies on computer.

    You will need to look for a program that helps you edit metadata.

    Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

Maybe you are looking for

  • HP Envy 15: No button left or right on the area of control of hp envy 15

    Just bought the Envy 15 and noticed, it has an area of control.  Cannot know what takes the place of the left and right buttons.  I am helpless without them.  It's my first introduction to windows 8.  I used Vista before.

  • 15 - r052nd: RAM replacement HP 15-r052nd

    Hello people! I have a computer laptop 15-r052nd HP for about 3-4 months.Recently, I noticed that my laptop used about 99% memory while doing the program so I want to upgrade my memory.This is no big problem for me. But 1 problem, maybe a problem of

  • Deskjet 832 C: printer

    My 832C printer has worked fine until what I've upgraded to Windows 10 and maybe it's just a coincidence.  It prints well, but I heard a terrible cry, a few seconds after the last page has printed while something is set to zero.  Anyone know what it

  • Insufficient low battery warning

    When my battery levels reach levels low/critical neither more didn't get any warning or I get bored, leading to unexpected stops. I checked the levels at which warnings are enabled and have put an alarm to sound, but the sound warning does not occur

  • The managed path data

    Someone knows how can I make areport of all virtual machines with RDM which will include the managed path LUN id. IS this possible with Vfoglight?