Slate professionals or just a self-help group?

Although efforts to help members is very popular (cordially

to rainmanP), I feel rather, I joined a discussion that one club

Professional advice for a series of professional equipment.

except breaks the rules his readers are left in the speculation.

because a lot of hardware related problems, some of them as relevant for

me either, are left not resolved or still unanswered.

a catch, this compounds - application support support Lenovo gets you less.

Damian

Ouch!

Tags: ThinkPad Tablets

Similar Questions

  • Pavilion G6 power on password forgotten by my friend, just trying to help him. stop the 66158175 code

    Pavilion G6 power on password forgotten by my friend, just trying to help him. stop the 66158175 code

    Hello

    Try to enter: 79830171

    Kind regards

    DP - K

  • Windows does not start on my old compaq to 4 year with Vista Home Premium. I followed all instructions self-help without a bit of luck. (I recently added a dongle broadband from O2 to my pc.)

    File: \Windows\ config\ 32\ system

    status: 0xc0000017

    Info: windows failed to load because the system registry is missing or corrupted
    I followed all instructions self-help without a bit of luck. (I recently added a dongle broadband from O2 to my pc.

    Hello

    1. who did you try all the steps?

    2 did you change on your computer?

    Method 1:

    I suggest you follow the link and check...

    How can I fix a startup (startup)?

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

    I also suggest you to follow the link and check.

    Startup Repair: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

    Method 2:

    I also suggest you to perform the system restore and check.

    System Restore: Put the computer to an earlier point in time, when everything worked well. If the system restore is a recovery preinstalled on your computer option:

    Restart the computer manually.

    (a) do one of the following:

    a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

    (b) on the screen Advanced Startup Options , use the arrow keys to select repair your computer, and then press ENTER. (If repair your computer is not listed as an option, then your computer does not include restoration of the system as a preinstalled recovery option.)

    (c) select a keyboard layout and then click Next.

    (d) select a username and password, and then click OK.

    (e) on the System Recovery Options menu, click System Restore. Put the computer to an earlier point in time, when everything worked well.

  • I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please

    I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please :(

    Hello

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • my pc is inffected with the virus and I can take it on you can help me just red computer help all there am really worried please me

    my pc is inffected with the virus and I can take it on you can help me just red computer help all there am really worried please me

    You are able to download programs on the net?

    If so, dowhload and run the following anti-virus, Ant-malware and anti-spyware programs.

    1 Malewarebytes:
    http://www.malwarebytes.org/ ... choose the "free" version

    2 STOPzilla:
    http://www.stopzilla.com/products/stopzilla/home.do ... it's free

    3. Windows Live OneCare online scanner... it must be done online. It's free.
    http://OneCare.live.com/site/en-us/default.htm

    Good luck. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Self-help article 2015 Photoshop CC.

    That's the question, txs, dona

    Hi Dona,

    Are you are looking for the Self help section for Photoshop.

    Please visit the following link: helps Photoshop | Using Photoshop

    Let me know if it helps.

    Kind regards

    Tanuj

  • I don't want to start a discussion! I just want to help with a product that does not work!

    I don't want to start a discussion! I just want to help with a product that does not work!

    http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    Mylenium

  • help group

    Hello

    I have a table of PRODUCTS like this:

    ID COD_PROD CAT STATUS PRICE DT

    1 P1 C1 SOLD 10 10/7 / 2015 12:23

    P1 C1 CANCELLED 10 10/7 2 / 2015 12:24

    3 P1 C1 SOLD 10 10/7 / 2015 12:25

    4 P2 SOLD C1 12 10/7 / 2015 12:26

    5 P2 C1 CANCELLED 10/7 12 / 2015 12:27

    P3 C2 SOLD 13 10/7 6 / 2015 12:28


    I need to group them by category (CAT) and the PRICE of the sum in order to show how much of each category.

    The problem is on the STATUS column, because I have to examine all documents having the status of last '' SOLD '' =

    In the table above, the query must obtain P1 and P3


    Any help?

    Thank you

    PM



    This part:

    WITH DATA (ID, COD_PROD, CAT, LOCATION, PRICE, DT)

    AS (SELECT 1, 'P1', 'C1', 'SOLD', 10, to_date (October 7, 2015 12:23 ',' dd/mm/yyyy hh24:mi:ss') FROM dual UNION ALL)

    SELECT 2, 'P1', 'C1', 'CANCELLED', 10, to_date (October 7, 2015 12:24 ',' dd/mm/yyyy hh24:mi:ss') FROM dual UNION ALL

    SELECT 3, 'P1', 'C1', 'SOLD', 10, to_date (October 7, 2015 12:25 ',' dd/mm/yyyy hh24:mi:ss') FROM dual UNION ALL

    SELECT 4, 'P2', 'C1', 'SOLD', 12, to_date (October 7, 2015 12:26 ',' dd/mm/yyyy hh24:mi:ss') FROM dual UNION ALL

    SELECT 5, 'P2', 'C1', 'CANCELLED', 12, to_date (October 7, 2015 12:27 ',' dd/mm/yyyy hh24:mi:ss') FROM dual UNION ALL

    6. SELECT "P3", "C2", "SOLD", 13, to_date (October 7, 2015 12:28 ',' dd/mm/yyyy hh24:mi:ss') FROM dual)

    is simply because I do not have the table, so you'll not need just uses your name to the table here:

    WITH getlaststatus (SELECT ID, cod_prod, chat, location, price, dt

    first_value (status) OVER (PARTITION BY cat, cod_prod dt to ORDER BY DESC) AS last_status,

    row_number() (PARTITION BY cat, cod_prod dt to ORDER BY DESC) AS last_action

    Of your_table_name)

    SOME cats, Sum (Price)

    OF getlaststatus

    WHERE last_status = 'SOLD '.

    AND last_action = 1

    Chat group

    /

    If this solution uses only the last record of a combination of cat/cod_prod if it is a status of SOLD.

    HTH

  • Help group BY

    Hey all,.
    I'm having a hard time with this one, any help would be appreciated.
    I have a table with 4 fields:
    ID, HAND, TIME, SPD

    It should look like this

    ROWID, ID, HAND, TIME, SPD
    1, AA, 01, 1: 45
    2, AA, 02, 1, 44
    3, AA, 02, 2: 33
    4, AA, 03, 3: 44
    5, AA, 02, 5, 55
    etc.

    What I have to do is to get an AVERAGE of the SPD column
    where I GROUP by ID, HAND and (here is the hardest part) TIMES (ONLY if its sequential)

    By ROWID
    1 would remain the same.
    2 and 3 would be on average because ID, HANDS are the same and the TIME is sequential
    4 and 5 remain the same...

    looked analysis AVG to see if I could just create a moving average (partitioned by ID, HAND), but she always ends up with an average of rows 2, 3 and 5. I imagine you could do with PL/SQL but not well versed in the sliders and the table that I it would run on the numbers in the billions of lines...
    Thanks in advance,
    Eric

    If I understand correctly.

    with t as (
    select 1 r1, 'AA' id , 01 m1, 1 t1 , 45 spd from dual union all
    select 2, 'AA', 02, 1, 44 from dual union all
    select 3, 'AA', 02, 2, 33 from dual union all
    select 4, 'AA', 03, 3, 44 from dual union all
    select 5, 'AA', 02, 5, 55 from dual )
    select id,m1,avg(spd)
    from (select m1,r1,id,t1,grp,spd
    from t
    model
    partition by (m1)
    dimension by (row_number() over (partition by m1 order by r1) rn )
    measures (r1,id,t1,spd,lag(t1) over ( partition by m1 order by t1) next_t1,1 grp, 1 grprec)
    rules
    upsert
    iterate(1000)
    until(presentv(t1[iteration_number+2],1,0)=0)
    (grprec[any] = nvl(grp[cv()-1],1),
     grp[any]= case when nvl( next_t1[cv()]+1,t1[cv()]) =t1[cv()]  then
                 grprec[cv()] else  grprec[cv()]+1  end))
    group by id,m1,grp
    

    output

    44 3 AA
    55 2 AA
    45 1 AA
    AA 2 38.5

    Published by: alvinder on March 4, 2009 09:51
    Correction of the error I made.

  • BlackBerry Q10 callers can't hear me phone earpiece / normal, just speaker! Help?

    Hello

    I just bought a Q10 and love all that, except for the fact that the appellants can only hear me when I use the speaker. The microphone seems fine, I ran the diagnostics... is therefore not a hardware problem. And he does not pick up my voice when I'm on speaker.

    I tried to jump the battery for 15 minutes and put it back, which did not help. I've also updated the operating system and that made no difference.

    I think that others have the same problem... is there a solution for this? Please help, I need this phone to work.

    Thank you very much!

    S

    'New' is difficult to interpret, because it can mean different things to different methods... but nonetheless...

    The next thing to try is the virtual Expert of BB (I don't know if that's what you mean by your original report "diagnosis"... apologies for the redundancy if yes):

    • Article ID: KB35973 Virtual BlackBerry Expert diagnostics application using

    Failing this, official support of your place of origin of purchase, or another provider of the guarantee (as determined by your original purchase agreement).

    Good luck!

  • Help group above report

    Hello guys,.

    What I have to do, is to modify an existing report that is in the table style to the group above data model.

    First, I changed the data model to extract the existing data model group and I got no problem with that.

    Secondly, I added grouping framework for my new recordings of grouping (master) and put inside the previous image of grouping (details).

    The problem is when I generate the report that each record is separated by a huge empty line:

    This photo shows this blank line between records:

    [IMG] http://I59.Tinypic.com/bdl46p.jpg [line]

    I think I tried everything, I even deleted all the fields of the report and left only my two group executives, but problem still exist.

    This is my body of report:

    [IMG] http://i62.Tinypic.com/28a3u5l.jpg [line]

    If you have ideas, what can be wrong or what to do, please help

    You mean, there's already detailed report, now you want to change to master detail (group above).

    At the level of the model:

    You divided the existing group into two bases on simple request, haven't you? means there are now two group master and detail.

    means, group existing, becoming a master and detail created a new group. Let's say that G1 is the master (existing) and G2 (new) group retail.

    If above understanding is correct then proceed as follows

    Place the new extensible framework (say RG2) within the existing extensible framework (let say RG1 and assign the name of the new group G2 to RG2. framework and place all the Group detail fields in extensible framework newly established RG2.

    Hopefully, you will get the expected changes in this way.

  • A gap of 1 line under the address bar in the browser firefox after installing the Google toolbar. Unistalling both and then installing firefox just didn't help. All solutions?

    I'm not able to remove 1 inch gap, which came just after the installation of google toolbar. After that, I uninstalled Google Toolbar and Firefox respectively and there still, installed Firefox only, but the gap of 1 inch (1 row) remains just below the address bar of the browser. How to remove it?

    Have you tried to disable the other addons? (Click Firefox > Addons > Extensions, disable all extensions one by one, but the Google toolbar and restart Firefox)

  • I just the Backflip * HELP EXPERTS *.

    Well, after dealing with the iphone for about 1 year or if I'm here to say my backflip makes me really do backflips. This phone is AWESOME! compared to the iphone, your freedom of... .anything is limitless! but here's my questions! Help, please!

    • Q.1 - with many friends with android phones, how is mine do not have this led light near the walls of the ear that turns on with the notifications?
    • Q.2 - has anyone notice that the camera to function always fails and you must restart phone to get it working again?
    • Q.3 - noted that events cannot catch up with the real events? As you will see things that are about a day old, even if you have defined the events don't happen for a day; do not they should in any case HAPPENINGS in front of history?

    MORE TO COME PLEASE HELP

    There are actually three lenses, two (near the M logo) are sensors of proximity and to the right of the speaker is a light sensor (adjusts the backlight automatically depending on surrounding it).

    Also, could you provide please exactly what States of error the next time see you?

  • I can connect, but when I try to read my emails, they're not coming to the top just freezes - please help me

    I HAVE SIGNED IN BUT CAN NOT CHECK MY MAIL BECAUSE IT CRASHES WHEN I TAPE PLAYBACK... I ALSO TRIED TO RESET AND GO THROUGH TODAY AND ALSO DEFRAGMENT IT... I ASKED BEFORE AND MY FRIEND TOLD ME THAT THERE IS A VIRUS IN MY MAIL. AND I ALSO HAVE NORTON ANTVIRUS. CAN SOMEONE HELP ME PLEASE?

    Hello

    (1) do you have made no changes before this problem?
    (2) what is the operating system installed on your computer?
    (3) what mail client do you use on your computer?
    (4) you use webmail or any of e-mail client installed on your computer?
     
    If you use a webmail and using Internet Explorer I suggest you follow the steps described in the article mentioned below.
    The problems of access to webmail using Internet Explorer
     

    Alternatively, you can refer to this article for more suggestions.

    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

    Hope this information helps.

  • can someone... Helpa A Nice Italian Boy? lol__trying of comments limited or limited to my personal account programs THAKS for ALL JUST HOW the HELP

    Hi all, I'm trying to limit the guest account or an account limited, so they are unable to use my personal programs but I think because they are listed under documents and settings all users, I am unable to do, so my question is how can I move these and where do I move to or how can I do so they are not usable by the guest account... Any help would be great thank you... westcoastdago :))

    You can deny access to your program executable files to the guest user if you wish.  Follow the steps here:

    "How to set, view, change, or remove special permissions for files and folders in Windows XP"
      <>http://support.Microsoft.com/kb/308419 >

    To do this, you must Access the 'Security' tab in the file properties.  In XP Pro, you should disable "Simple file sharing" to access this tab:

    "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
      <>http://support.Microsoft.com/kb/307874 >

    If you have XP Home Edition, you must boot to Safe Mode and login with a user with administrative privileges to access this tab.

    HTH,
    JW

Maybe you are looking for