Slave keeps restarting after unstacking-Dell PowerConnect 6224 switch

Similar Questions

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• PC keeps restarting after that I copied some files

  my pc keeps restarting after countless attempts trying to remove this file dvd that I copied from a dvd. When I tried to delete this file using a different account, the cycle just repeats.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How to access the management of VLANs with a different virtual LAN (Dell powerconnect 6224)

  Hello

  DELL powerconnect 6224 reference.

  I want to access the management of a different VIRTUAL LAN VLAN.

  The management of VLANS is 100 of VLAN. not the routing

  My computer is vlan 60 (192.168.60.10) and I want to connect via ssh or http (192.168.100.1) to manage my switch.

  Thank you for your help on the command line

  The management of VLANS on the 6224 is not routable. So, you will not be able to access VLAN 100 from any other VLAN. However, you can manage the switch from other VLAN IP addresses. So if VLAN 60 has an IP of 192.168.60.1 you can http and ssh to it. And if the VLAN routing is enabled you have access to 192.168.60.1 on the other VLAN.

  See you soon

• Good method to restore running, boot and Firmware for PowerConnect 6224 switch

  Hi all

  I have a switch PowerConnect 6224 of production that is configured exactly as I want.  I have a new PowerConnect 6224 switch I want to restore the config is possible?  My goal is to not have to manually enter settings for each single switch.

  I tried a few methods, but they do not seem to work.  If anyone can tell me the correct procedure or point me in the right direction would be great!

  Here's a document on some older switches which explains the process.

  www.Dell.com/.../app_note_12.pdf

  It is different for the 6248 somewhat, but the concept is still the same.

  Copy of the file Image of a server to Flash memory

  Use the command copy of the image - the url of the source to copy an image from a Flash memory server file, use the boot system command to activate the new image.

  Copy of a Configuration file from one server to the running Configuration

  Use the running-config command to copy the url of the source to load a configuration file to a network server for the device running configuration. The configuration is added to the running configuration, as if the commands were typed in the command line interface (CLI). The resulting configuration file is the combination of the running configuration and the loaded configuration file, with the configuration file with priority.

  Copy of a Configuration file from one server to the Startup Configuration

  Use the command copy startup-config - the url of the source to copy a configuration of a network server file in the startup of the device configuration. These commands replace the configuration file starting with the copied configuration file.

  Store the Configuration of starting or running on a server

  Use the command copy running-config destination url to copy the current configuration file to a network server by using TFTP. Use the copy destination-url startupconfig command to copy the configuration file to start on a network server. The copy of the configuration file can be used as a backup copy.

  firmware download also includes step by step instructions on how to upgrade the firmware.

  www.Dell.com/.../drivers

• How Reboot/restart Dell Powerconnect 6224

  Hello

  My company has 2 powerconnect 6224, 1 is the master and 1 slave, do I know how could restart/reboot my switch in the GUI?

  Can I use the cli to restart/reboot command and what is the command line.

  Thank you

  Using the CLI to recharge the battery, you must use the # reload command. You can add the number of the switch in the command reload members of chimneys. charge # 1, # reload 2.

  You can also use the command console (config-battery) #initiate failover. This command forces a warm restart of the battery. The unit of backup succeeds the new management unit without clear status of material on the stack members. The original management unit restarts.

  In the graphical user interface, you can reboot the switch with entering the system > general > reset. You can also start a recovery using System > stacking > NSF summary. Initiate failover will begin a warm reboot of the switch.

• Computer keeps restarting, after installation of the SP3 for Windows XP.

  After you install sp3 for windows XP my computer keeps restarting. I have difficulties to find the patch that corrects this can someone help?

  Original title: sp3 problem with AMD processors

  Well, with this description, you might want to look at this:

  http://support.Microsoft.com/kb/953356

• Phone keeps restarting after the last update

  After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
  HELP ME GUYS!

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• Proxy-arp or local proxy arp? Reference Dell Powerconnect 6224

  We need allow some customers to resolve the mac address of a server that is located in a different range of addresses, VLAN and IP.

  I thought that the addition of the ip proxy-arp interface command vlan should do the job, but this command seems to be activated by default according to the reference guide, after that I tried to add the command he always show up on a running show. Which confirmed my thoughts. While I was looking for the solution that I saw another command that does not appear in the cli reference guide: local-proxy-arp ip. But since I'm not sure of what will make this command I am careful to hit just the command on the interface VLAN.

  How others send their arp on powerconnect 6224 requests?

  After reading my own source again, I realized that the thing that I want is not possible. It goes beyond the need to divide the network into segments. If all the query arp is transferred to other networks, there is a benefit less: you want to limit the broadcast domain.

  Static ARP is the thing I'm going to need to be implemented to solve this problem.

  Thanks for the clarification anyway.

• I can't install Firefox for Android on HTC Desire (Froyo) via Android Market, as the download keeps restarting after reaching 60-75% (about 7-8 MB of 13.84 MB). Any help?

  Download on restarts after a while. The notification bar poster download % as if the previous download is still in progress. It is, first time started download, notification bar shows % correct. Around 70%, the download within the app market starts again from 0 KB, and the notification bar indicates the average of the two downloads (35% when the download market is 0%, 40% after download in 10%).
  This second new download disappears from the market and a third begins, no any other warning or error message. This time the notification bar indicates average of 3 downloads!
  No idea what's going on, this is my first download firefox for mobile.

  Sorry, I don't know why the app from the market is unable to complete the download.

  If it still does not work, you can try the link to FTP server on this page and see if it works better:
  https://wiki.Mozilla.org/mobile/platforms/Android

  You can also try to download Firefox on your computer using this FTP link and then look for the instructions on how to "sideload" application on your phone via the USB port.

• Equium A60 keeps restarting after installation of the graphics driver ATI

  I have installed the Toshiba ATI graphic driver, but when I restart the laptop, it does not start, keeps restarting before surposed to go on windows XP. Help, please.

  Hello

  Try please solve it as described on this Microsoft article http://support.microsoft.com/?kbid=293078

  Generally, the display driver installation should help. As you know sometimes it is not easy to fix this kind of problem and sometimes is much better recovery procedure.

  You can not write about any common problem if you n t know exactly why this happens. If you are recovering the unit it will be working well. A negative influence on the graphic can have some games preinstalled or many other additional software.

• Vista keeps restarting after the installation of updates

  I have IBM laptop computer a customer T61, Vista Home Premium. Starts and goes to the "Configuring updates 3 of 3, then it goes to"shutting down"and keeps restarting."

  I tried safe mode, last good, from CD and repair of Windows, nothing worked.

  Any ideas on what else to do only a reinstall full?

  Thank you

  Ed

  Try this
  http://support.Microsoft.com/kb/949358

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• My computer keep restarting after it closed

  Hello to all, my computers build with i7 processor - 6700 k, Gigabyte GA-Z170X-GAMING 5 MB, Samsung SSD 840 EVO 500 GB ATA, Pioneer BD - RW BDR - 209D, 32 gb G Skill, Gigabyte graphics card.  I install windows 7 ultimate 64-bit.  Everything run smooth during the boot.  However, once I turned off my computer.  It will restart by itself in a few seconds.  is there a solution for this problem.  Thank you very much

  Hello

  We are here to help.

  The reason why your PC restarts after you turn it off, it's because there is something wrong which makes crashing. Normally, there will be an error message coming up, like Blue Screen of Death, when it crashes instead of rebooting the system. But for some reason, your PC is defined as automatically restart and hide the real problem of your PC.

  To change the settings, please follow the steps below:

  1. Click the Start button
  2. Type ""sysdm.cpl " without the quotes, and then press enter."
  3. Click the Advanced tab
  4. Click on the settings button under the ' start and Recovery ' part.
  5. In the new window you are invited there, uncheck automatically restart under the part of the system failure .
  6. Then, click OK
     

  With these changes, Windows will restart is no longer after closing down instead he will now take the error message that your PC can be seen.

  For more information, please visit this link.

  Kind regards.

• Update Firmware on Powerconnect 6224 switch

  I am wanting to update the firmware on my Powerconnect 6224 3.3.1.10 Version 3.3.5.5 Version switch.  Is there a problem with this jump or if that's okay?

  I would like also some words of wisdom as how this upgrade as painless as possible.

  Sincerely,

  Ken

  You should not have problems from this version to the current 3.3.5.5.  If you are not familiar with the command line on the switch, you can download the firmware from a location on your workstation management through http.

  You start by downloading the 3.3.5.5 from the support.dell.com site. Keep in a folder.  Then from the interface WebGUI of the switch, you can go to System/file/management folder download you must choose HTTP to transfer mode, then navigate to the location of the firmware on the desktop you.  Here is a screenshot of the file download page.