Sleep button... gone power?

Similar Questions

• Satellite S50-B-13N - additional sleep button?

  I have a Satellite S50-B-13N and a question to windows (8.1) energy-settings (same setting page)
  There are parameters for a sleep button (separate power switch).

  Is there a standby buttun or the button located on the satellite.

  Ttank you

  Is there a standby buttun or the button located on the satellite.

  No, just the power button, but the button can be configured in the Windows power options

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• In menu start Office my sleep button is inactive how can I turn it back on, it

  I did something to disable 'Sleep' in the start menu, although his visible it does not allow me to put the computer to sleep. This is after receiving an option to do it which I hoped would eliminate something that froze my computer.

  Even if the computer seems OK, I need to reactivate 'sleep' but cannot find anywhere to do?

  Hello

  1. the application or the program you used to disable the sleep button?

  2. what exactly happens when you try to put the computer in mode sleep? You receive an error message?

  I suggest you change the power Plan in Windows Vista and check if that does the trick:

   

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  You can also check out the following articles for more information on issues of power plan:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

   

  Solve power problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  Hope the helps of information. Please post back and we do know.

• ElitePad 1000 G2: Sleep button does not work for sleep

  Dear community,

  I have a problem with my HP ElitePad 1000 G2: after a few updates sleep button on the device has become idle to send the unit in standby mode. It works for starting Windows from Power Off, it works for the dialog box to Switch Off if you push 5 sec. But it does not work if you press briefly just to fell asleep.

  I tried several times to configure the Power Options settings (power button configuration: all options are set to sleep for button / stop and sleep button). I don't know what to do. Help, please!

  Thank you

  Vaso

  Hi Vaso,

  Yes I know. This is no solution ;-)

  I'm sure that: when you uninstall the WWAN module (do not reboot) the sleep button is working again! ;-) Please try it out.

  I have this problem on all our shelves.

  The problem is the Intel driver on the HP site.

  Please give us a feedback. I'll do some tests on my site also thereafter.

  concerning

  Peter

• I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  Only thing you can do is to let die and then hold the home button when you plug it into your computer to put it in recovery mode.

  Actually if the phone is on and that you have an icloud account, you can delete it at distance of icloud.com

  Go to find my iphone and erase the phone.

• How can I inable my sleep button on my keyboard works

  How can I inable my sleep button on my keyboard works

  Hi Gary,.

  ·         Who is the manufacturer of the keyboard?

  ·         The key on the keyboard is considered operation?
  If it works much earlier?

  It depends on the keyboard brand and model that we can make changes. If you use a Microsoft Keyboard, you can follow the below mentioned article.

  The problems of wake the computer from sleep mode

  Respond with more information so we can help you best.

• "sleep button" disappears

  The "sleep" button disappears and does not work in my Vista. Help, please

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi jc8,.

  1. did you of recent changes on the computer?

  2. When does the sleep button disappears?

  3. you are using laptop or desktop?

  4. What do you mean by sleep button disappears? It is not available on the start menu?

   

  Method 1

  Check to find the sleep button click Start and you will find the sleepbutton in the pane on the right next to the arrow button.

   

  Why sleep is not available?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-isn ' t-sleep-available

  Method 2

  If the previous step fails, then you need to update drivers video card in the computer by visiting the website of its manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro L300 - 1FJ PSLB9E enters mode "sleep" instead of power

  Hi all...

  I have a laptop Toshiba Satellite L300-1AF, and I noticed this issue only recently.

  It works and everything it ok it runs Windows XP Pro SP3 and works normally, however when I stopped it closes down and runs out of windows and the amber standby LED starts to pulse if it is in standby mode.
  Then, I turn to it now and back again with the power button to stop a pulse.

  So in short, it seems that windows closes down successfully, but then the laptop goes into sleep / standby mode instead of turning it off. Anyone know why this is happening?

  Hello
  Are you sure that you have chosen the Option: Power OFF instead of the Mode standby?
  As much as I know Win XP does not additional option to configure SHUTDOWN on the start menu.

  But you should check this:

  Go to control panel-> power options control
  Here in select it a feeding area, click Change plan settings
  In the advanced settings window, click on the + next to the power buttons and lid.
  Now, you will see the options available.
  Under the cover option and power buttons, click on the + sign next to the start menu power button.
  Then click on the parameter and choose stop down.

• PC goes mode sleep when the Power Options are set for ever, etc. also can not wake up

  Hi, I read the other posts on this topic, but my problem seems a little different.

  I am running Windows 7 on a Dell desktop computer and I tried to run chkdsk and also the Dell diagnostics that I have some problems hard drive; However, it gets so far and the pc goes into mode 'sleep' causing me even worse problems that chkdsk/diagnoses are halfway through a volume. The pc has done this on and off tension for awhile, but hopefully not when something critical is running, even if it is a nuisance.  I did all the steps recommended here as ensure my Power Options are set, etc., but he always does.

  In addition, when the pc goes to sleep, I can't wake him up by pressing the power button or any key on the keyboard.

  I've been in contact with Dell and they said that it's a software problem.

  Someone can suggest something else I can do (stop) the computer mode 'sleep' and also how to wake him.

  Thank you.

  Hello

  I'm sorry for the late reply.

  As you mentioned in your previous post, you wanted to know how to boot from the disc, I've provided the steps how to boot from the disc on my previous post. However, you can try to repair your windows using DVD for Windows 7 backup and check.

  You can see this Microsoft article below that will help you fix Windows 7.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  Let us know if you need help most.

• Home + sleep button doesn't turn off phone, it just restarts.  I want to turn off my phone.  Just installed 9.2.1.

  I just installed the 9.2.1 update and now my iphone 6 more will not shut off.  It just restarts.  He is not stuck, I can drag... any other issue except that it does not turn off and I need to turn it off.

  Help, please.

  By pressing the Home and power button / stop was always the method to restart the phone. To turn off the phone, press and hold the power button until it says "slide to turn off." Follow the directions and turn off the phone

  Restart your iPhone, iPad or iPod touch - Apple Support

• How repair my iphone 6s hung in camera I can't able to access on the other and I can't able to swtich offf if sleep button the tank please help me

  I took a few pictures without unlocking my iphone 6 s after that he stuck behind closed doors himself and tactile assitive works but can't go to the home page in my laptop, I tried to change my sleep the mobile tank button that works also not I'm not what to do. Please help me solve this problem.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support

• Sleep button is shaded on. The system is XP home.

  Impossible to put my computer into sleep mode. Any suggestions?

  If your buttons Stand By and Hibernate in the menu or shut down the computer are missing, gray out or inactive:

  The options in the menu already worked shut down correctly before?

  Have you recently installed, reinstalled, updated or repair your Windows XP?

  Has anything on your system that has nothing to with your video display or monitor?

  What do you think has happened since the last time the options in the menu to stop the computer was working normally?

  If the buttons used to work and if you have just installed Windows, reinstalled Windows, doing a repair installation, used a system restore point (or other things in that sense), you will probably need to update your video drivers as well to restore the function of the buttons.

  If you have accepted the Microsoft video hardware driver updates (never a good idea), they can send you bad drivers.

  If the video drivers on your system are not correct, these buttons often will not work.

  Usually and easy to check and correct, is the video drivers for your system that must be downloaded to your global manufacturers Web site. Download the correct (recent) video drivers for your graphics card, install the correct video drivers, reboot your system, and then test.

  If you can not know how to check if your video drivers are correct, may not know how to get to the World Wide Web of manufacturers or can not know what to do then, maybe we can look at it for you if you provide more information.

  What is your system brand and model?

  If you are not sure what you have, that:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click Edit, select all, copy and paste then return here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete it.

  This minimize back Q & A and eliminate guesswork, trying things and assumptions.

• Standby and hibernation are gone power options

  For the settings in the "Power options properties" folder (not the folder), I did something to cause the ability to enter "sleep" mode and mode to completely disappear as hibernation options. Now when I want to turn off my Gateway NX500S laptop, the only options are shut down or restart. Can someone help me solve this problem?

  Sam, see if this Microsoft Support article is no help.

  Rosie