Sleep function and passing binary icon updated

Similar Questions

• Creating a function and passing the value of the query

  I have what I thought, it was a pretty easy to resolve the situation: I want to concatenate two fields of the query, if the 2nd is not empty.
  
  I created a function:
  
  < name cfargument = "q1" value = "#query.q1 #" / > "
  < name cfargument = "q1a' value =' #query.q1a #" / > "
  
  < CFSET variables.myPunct = ":" > "
  < cfset variables. ResultVar = "" >
  
  < cfif QNE Trim (arguments.q1) "" > "".
  < cfset variables. ResultVar =' #arguments.q1 # ">"
  < / cfif >
  
  < cfif QNE Trim (arguments.q1a) "" > "".
  < cfif variable. ResultVar NEQ "" > "".
  < cfset variables. ResultVar ='#variables. ResultVar & variables.myPunct # ">"
  < / cfif >
  < cfset variables. ResultVar ='#variables. ResultVar & arguments.q1a # ">"
  < / cfif >
  < variable cfreturn. ResultVar >
  
  It's basically just the example they provide in online education, with the names have been changed.
  
  In the strip of the details of my report, I have an expression builder containing field: report.mytestfunction)
  
  When I run the present, I get: Q1 element is not defined in the ARGUMENTS.
  
  I tried this ninety different ways (literally). It seems very clear to me that the query.q1 (Incidentally, none of the results of the query) are NOT passed to the function. I tried to make the expression: report.mytestfunction (query.q1). I tried to create an input parameter.
  
  The documentation on this is ridiculously limited, given that the ability to implement conditional logic is entirely dependent on the 'function', I can say. I can in no way to get the function of interface with the query results. If the value fixed values in the service, rather than trying to use query variables, it shows very well.
  
  Any ideas?

  Have you tried to remove the attribute "value" of your cfargument tag? The way I see it, you should have:

  
  

  ... rest of function...

  And then you have to call it with: report.mytestfunction (query.q1, query.q1a)

• Definition of a JavaScript function and call it a field

  Hello!

  I would like to create a function that will be called when a numeric field is calculated.

  This function will write a number as text, is similar to what WordNum, but in Portuguese.

  Please, I would like to know:

  -To set the function and syntax of LC Designer?

  -How the call of the field event?

  Thanks for the tips!

  Marcos

  Hi Marcos,

  I saw your thread earlier, so I think I understand what you are looking for.

  If you right-click on the root node, you can select "insert the script object" in the menu.

  This will create the script in the hierarchy object, which you can then name. Say that "translate".

  Script objects will only accept Javascript, so your translation solution would need to be in this language. If you select the script object and go into the script editor, you can declare the function, name it and enclose it in brackets is curley:

  function Engligh2Portuguese()
  {
       // your function script
  } // close function
  

  You can call the function of an event in an object. Let's say you have a textField, you want to hold the value of a field of amount ("sum"), but in words.

  In the case of calculating of textField you call the function and pass the value of the numerfield:

  translate.English2Portuguese(amount.rawValue);
  

  Then the function in the script object would need a variable to hold the value passed. For example, in the script object, the function would look like this:

  function English2Portuguese(vAmount)
  {
       // your function script
  }
  

  I don't know what your real function will look like. I hope you have a solution for the part of the translation.

  Good luck

  Niall

• I keep running the update of firefox, but next time I click on my icon of firefox, it opens an older version and asks me to update. What is going on?

  I downloaded and ran the update of Firefox. It said it was successful and then the homepage etc came. However, after I had closed and starts again the 'old' version came when I clicked on the icon of Firefox with the usual comment I have an old version and that you need to update. I tried this three times with the same result. I have a laptop Compaq Presario 2200.

  What I am doing wrong?

  If you use the www.google.com/firefox as homepage site that previous versions of Firefox 3 use as homepage you can ignore the message about not using the latest version of Firefox on this page.
  
  Google seems to keep this page.
  
  The text on the implementation of the latest version of Firefox is in the code of the www.google.com/firefox site that previous versions of Firefox 3 use as homepage and it seems that Google is no longer do not update this page.
  
  The current versions of Firefox 4 + is no longer use this website from Google as home page, but use the build-in on: home page as the home page.
  
  Google assumes that you are using an older version of Firefox if you still visit this site, and warns you that you are using an older version of Firefox and invites you to update.
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I recently bought creative cloud, and after a few updates and downloads, my desk right icon now produces an empty rectangle if clicked. How to bring back my list?

  I ended the application of uninstalling and reinstalling and that seems to have done the trick. Thanks for the help - it lead me to the right place

• Given that I have updated to 2015 CC, cannot save SVG work plans. Always record the leaves whole and not separate icons. No idea how to resolve this?

  Given that I have updated to 2015 CC, cannot save SVG work plans. Always record the leaves whole and not separate icons. No idea how to resolve this?

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• How can I build and pass a variable to the function getField?

  I need to know how to build and pass a variable to the function getField():

  I have a form of several sections similar to a spreadsheet.  Each section contains 5 rows of 11 columns.  Currently I have calculations in the field I want to consolidate and move to the level of the document.  The field names in each column are identical except for a row identifier.  For example, in the 1st row: a_debtType1, a_debtTerm1, adebtRate1, etc.  I want to be able to pass to a function of level document line identifier and that connect a function "getField.  Here is an example:

  Document-level:

  function calculateLoan (lineNumber) {}

  var myDate = getField("a_debtType"+lineNumber).valueAsString;

  var myDate = getField("a_debtTerm"+lineNumber).valueAsString;

  .. few treatment

  return

  }

  Level of the form:

  change the information in the form is ready for line 1

  function calculateLoan("1");

  Thanks in advance for any help.

  It seems good except how you call the function of what you have. The calculation script should be something like:

  Custom calculate script

  calculateLoan("1");

  Note that you can also get the line number if it is contained in behalf of the field that calls the script if you don't disturb him passing as parameter, assuming you named the fields correctly.

  For example, to calculate the field is called "row_total.1", you can get the line number in the script like this:

  var no_lig = event.target.name.split(".") [1] ;

• While error blue screen that clicked on the network and sharing Center icon

  whenever I click on network and sharing Center icon I got blue screen error and restarted p.

  Here are the event logs and sys inf.

  http://1drv.Ms/1tq4Y9M

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 124
  BCP1: 00000005
  BCP2: 8530801C
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  SG

  There is evidence that this is caused by malicious software.  I would like to launch malwarbytes to eliminate this possibility

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  If this comes back clean then it is related to the material, and because the DMP files mention Genuine Intel I ran the cpu stress test first.

  Try this free stress test: http://www.mersenne.org/freesoft/

  Prime95 Setup program;
  -Extract the contents of the zip file into a directory of your choice
  -Double-click on the executable file
  -Select "all stress testing.
  -Select the test of 'Blend '.  If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
  "Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
  The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
  Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
  The selection of Test and the file stress.txt box describes the components that insists on the program.

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).

  
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  
  
  More advanced reading can be found here from a MS MVP IT PRO
  http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

• Sleep function works is not in the business of Window7

  Hello

  I just upgraded from XP to Win7 Enterprise version.

  The sleep function has stopped working on my T61. No matter what I do - close the cover, press the key etc. of sleep - sleep light turns on for a few seconds and then returns to the ready state.

  Help, please.

  Thank you

  Zaidih

  Do you have the Win XP to 7 upgrade installation or own 7? Furthermore, have you installed all lenovo drivers after installing Win 7? Win 7 has recent updates from MS?

  For me, this looks like a device connected to your T61 not allowing him to go to sleep, I suggest you check the properties of the power management of any external devices, look at how to do on the next page (5th tip):- http://windows.microsoft.com/en-US/windows7/Sleep-and-hibernation-frequently-asked-questions

  More details about your configuration, better we will be able to help.

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Foxfire (last) it replace my foxfire with pencile and even paper icon in the Mac os applications folder

  Downloaded the latest Foxfire or os on Mac and restarted. Foxfire icon has been replaced by a note pad pencil and the sovereign, went to the applications and it is also! I love my fox and I not want to go back! Thank you

  Try to download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 39.0: https://www.mozilla.org/en-US/firefox/all/
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install or update Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Went to my new phone sync and my profile name is incorrect by a letter. Also says that my acct name and pass is incorrect when I try to log in as usual. Help

  When you try to sync my new phone android (galaxy S4 to S5 galaxy), my firefox on firefox sync profile name is incorrect by a letter. Instead of kokochako, it reads kokocako. IM concerned because my name and my password is the same that I use to log on to my laptop and my previous smartphones. I can't synchronize my acct or make changes to my profile name. I hit forgot password to reset, but because the email is wrong Im do not receive an email to change. I have not changed my name ever and my password has not been changed in at least 6 months. He repeated my name and pass is incorrect. My account has been hacked or compromised? All my info is still on my laptop, just under the wrong email address, im afraid...

  To answer:
  I'm worried because I can log in using my laptop (of course my good profile and password), but when I click on synchronize the name next to the profile icon is incorrect.
  
  
  
  What version of Firefox are you running on your labtop?
  Also on your labtop when the wrong name appears where you see that name, can you please attach a screenshot? How to make a screenshot of my problem?

  To answer your question about the identity or the keystrokes, you can run a malware scan to search your computer for malware. Regarding the identity, the user with the e-mail address that appears under the wrong name can receive your confirmation email to reset your password and may be confused (assuming that the name is the email that does not display properly)

  To answer your question how sync works when the next to the profile name icon is incorrect. Can also provide a screenshot of it? What is an email? I don't know which menu you're talking about.

  To fix this, you can create a copy of the profile on the laptop, backup and restore Firefox profiles information disconnect the wrong account and add the appropriate account and password.

  How to:

  1. You must disconnect the incorrect account name.
  • Open Firefox with Profile Manager to verify that there are no more than a profile using several profiles
  • Otherwise disconnect the account in the preferences/Options > Sync Menu
  1. Make a copy of the profile with the link above or below
  • Backup and restore Firefox profiles information
  1. Attach the appropriate account name and synchronize devices or that the account does not have the profile data is in the profile folder. Create a new account with this profile will keep you informed.

  If you have any questions about this, please do not hesitate to ask.

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!