SLEEP function does NOT work!
Hi, all of a sudden my sleep buttons do not work! When I click on 'Sleep', the monitor stops and the PC begins to close down, but then reason that the PC (and monitor) will be provided in works immediately... Someone has an idea? :)
Thank you
Mark
Hello
If sleep used to work, you can try a system restore to when it worked. The cause could be
an update of Windows - especially a update driver then check Control Panel - Windows updates - if you need to
Remove on look in the lower left - installed updates and uninstall - then you can right click on an update
and so it will not install to HIDE it. Following the publication of the update could solve your problem and have probablt is the
best way to take 1st.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
-------------------------------------------
More if necessary:
Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)
May need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP
I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?
Hello
All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.
Order of the facilities is as follows:
-Windows XP
-Display driver
-Audio driver
Toshiba - common modules
-SD Card host driver
-SD Card Driver
-BlueTooth Stack
BlueTooth - Easy Connect
-Mouse driver
-Modem driver
-LAN driver included with Windows XP
-Infrared driver
-Toshiba Power Saver
Utilities - Toshiba
Toshiba - post Mobile
-Toshiba Console worm.
-Toshiba Hotkey for display devicesI hope that you will be able to install Windows XP Home edition successfully.
Good luck!
-
Question
I want to record with < alt > < s > in the Exact program online. This function does not work. This is the first time I use this program with firefox.edit, escaped mod < s > in order to avoid the line through question
A web page can be defined a "accesskey" for an item. Unlike IE/Chrome/Safari, who use the Alt key only, Firefox requires pressing Alt and Shift to activate the element. In other words, try
ALT + SHIFT + S
and see if it works.
I don't know of any way to change this so that the change is not necessary. There may be an add-on?
-
curve adjustment function does not work
Hi all
I am trying to bend fitting, a graphic. but the curve adjustment function does not work. I get no output curve.
which suggests to me u.
Thank you
You have been asked to view the code. We cannot solve the photos.
Matrices X and Y are same length? Is a NaN value? What the output error say you?
(Also note that in this case, it would be convenient if we don't need to wire x take a look at this idea!)
This discussion is useless until you attach a real VI and data, so please.
-
My gesture control function does not work correctly there on and off automatically
My gesture control function does not work correctly there on and off automatically
which application you are using? try reinstalling the media gallery.
-
AUTO PLAYBACK FUNCTION DOES NOT WORK
AUTO PLAYBACK FUNCTION DOES NOT WORK WITH MY ADOBE PHOTOSHOP 7
Try to uninstall and reinstall the program. If this does not work, then I suggest that you contact adobe at http://www.adobe.com/support/photoshop/support. This doesn't seem to be a Vista problem - it sounds like a problem with Adobe Photoshop. Lorien - a - MCSE/MCSA/network + / A +.
-
Sleep function does not
Read the info on sleep disorders in the tutorial above.
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Also read this tutorial; as well as the 'related links' at the bottom of the links above.
See you soon.
Mick Murphy - Microsoft partner
-
The side-by-side function does not work correctly, windows overlap
original title: sizing windows side-by-side
The side-by-side function does not work correctly, windows overlap. How do fix you this feature?
Hello
It is Aero Snap. When you select a window how you "cutting" it in position? You do not use the window key and the arrow left/right or are you drag / drop window? If you drag / drop, using the keyboard shortcuts help to solve the problem?
Kind regards
Alex T.
~ 2007-2011 MVP Windows desktop experience ~ -
Right-click the folder or any other function does not work, and I don't have a sticky key...
While I click right click in windows Explorer has stopped working... Help, please!
A Virus Scan. Your PC can be infected. If you have not installed it, use MS Security Essentials if you have a genuine Version of Windows. It's free.
-
Win7 64 bit freezes & arrow function does not work, do not click to navigate anywhere
Win7 64 bit PC crashes & arrow function does not work, do not click to navigate anywhere, exceptionally after being on ~ 2 + hrs. I can only turn off by pressing the power switch for about 5 seconds.
Hello
Method 1
Step 1: I suggest to start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeStep 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.Method 2
I suggest you try the steps from the following link:Optimize Windows 7 for better performance
http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance
Open event viewer
http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer -
pcap_loop() to winpcap function does not work in windows8 pro
Hi all
I have two windows machines 8, both are 32-bit computers. One is windows 8 and the other is windows 8 pro (version 6.2 Build: 9200).I run an application to capture the packets of winpcap. To do this I use dll like 'wpcap.dll, Packet.dll, pthreadVC.dll' and also 'npf.sys"pilot.Version of wpcap is "4.1.0.2980", I downloaded this dll from ' http://www.winpcap.org/ '.In windows 8 "pcap_loop()" pro machine function does not work, but in windows 8 OS base it works fine and I can able to capture the packets of winpcap.Everyone please help me solve this problem.I have already installed the update compatibility for windows 8 from 'http://support.microsoft.com/kb/2764462' in windows 8 pro machine, but it does not solve the issue.Thanks in advance.R VRHello
I would have you post your query in the MSDN Community because it caters to an audience of it professionals. Your question would be more out there
http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral
You can also contact WinPcap for assistance in resolving this issue.
If you have questions about Windows operating systems, help us on this forum.
-
Search function does not work in a document, all the ideas of solution?
Nice day
I use Adobe Acrobat Reader DC 2015 Release Version 2015.008.20082 l. Within the program I asked for updates, and he says that it is current.
The "Search/search" function does not work even when I clearly see the word I'm looking. Any ideas?
Thank you
Meredith
Hi Meredith,
Please confirm if you are using Acrobat or Reader?
Search function will not work if it is a pdf document scanned in image format, you must apply OCR on this file by using Acrobat to be able to search for text in the document.
Kind regards
Rahul -
Why the App Store search function does not work?
Since the iOS most recent update (9.3.2), the app from the App Store does not work on my iPhone-iTunes app works perfectly, the App Store - space wasted on the screen and memory right now. I tried to disconnect, close the software, restart hard to my phone, but all I get when I try to search is a white screen. I can't even comment to apple in the app because it does not work. It was a time where this kind of thing never happened but the versions of software with major bugs is becoming more of a recurring theme lately. I'm really starting to wonder if Apple jumps right away even the most basic of pre-tests prior to publication just to get out a release. Frustrating to say the least.
The search function on the App store on my phone work if something is wrong with your system. Try to reset the App Store in the following order:
Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).
Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.
Then reconnect to the iTunes Store.
-
Search by name function does NOT WORK.
Before reading further, make a note of this: I have ALREADY installed the add-on "Search by name", and it DOES NOT WORK. By result, please do not suggest this add-on as a solution to my problem, since the module IS my problem.
I used Firefox ESR 10.0.11 and was forced to switch to 17.0.7 yesterday, even though my cfg file is set to not allow updates. Since the upgrade, searching by name function has stopped working, that is to say: I used to be able to type "yahoo" in the address bar and go directly to yahoo; now, when I type everything that is not a full URL in the address bar, he goes to allied.com. I've been in: config and changed the keyword: URL to http://www.google.com/search?ie=UTF-8 & oe = UTF - 8 & sourceid = navclient & gfns = 1 & q = and have also installed the add-on search by name. None of these work. Please help me.
Because of this definition of the keyword. URL pref stay?
If you do not keep the changes after a reboot or have problems with preferences, see:
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode safe or make changes.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
Do a check with some malware malware, analysis of programs on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender: Home Page:
http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - AdwCleaner:
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
http://support.Kaspersky.com/5350?El=88446
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
-
My copy and paste function does not work
I've recently updated to Firefox 16.02 and everything worked fine for a while but last night out of the blue my copy / paste does not work anymore. As far as I know that I did something different. Paste my copy function still works in Chrome and IE.
I have uninstalled/reinstalled Firefox and that did not solve the problem. As we speak, I run an analysis of the AV and also, I deleted the web cache and what not in Firefox. He ran in SafeMode... nothing seems to work!
Interestingly, however, when I went to copy and paste the "Troubleshooting info" Clipboard here on this page it worked fine.
Hello
Please see this.
Alternatively, you can try to reset Firefox and check.
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Maybe you are looking for
-
Phone savings bought ringtones to add again
I have several ringtones that I bought on my iPhone 6. I want to assure you that I have save correctly in iTunes for when I get my new iPhone I can then transfer them to the new. What is the correct process to do this? I have the latest version of t
-
Is it possible the give a name to an object of decoration?
Hello world I would like to change the colors of some squares of decoration (not too sure what is the English word for this but I don't know who are indicators or commands and objects that serve just decoration) on my front pannel. The problem I have
-
record the location of the screenshots
Hi all a straight line. Lollipop on the compact z3 appears to save screenshots in the internal memory, while they went to the external card of kitkat. Can a control where the screenshots get saved to with our lolloipop versions? Thank you Gary
-
C2K71ua #ABA: plugged in, does not support
Dear Sir. I've been using model: 4-1110us and I have been faced with the problem "plugged in, not charging for the first time for the end of days." Even today, I am faced with the same battery signal "." Please provide me the solution.
-
I'm trying to use the microphone to an external webcam (logitech C200), which is connected via USB to the laptop (vista, service pack 2). Now the broblem is that I managed to get the external speakers that are connected through the socket of the encl