slide of pointer

Similar Questions

• set slide break points

  Maybe I'm not find it because I use the demo version of Captivate 3, not the full version...
  
  I do a few tests using Captivate 3 registration form. I am trying to compare the finished result of Camtasia studio. My problem is that when I do a record onscreen, Captivate automatically breaks into several slides. I want the entire record to be 1 slide and have the opportunity to break into the top/edit it in post. Is there a way to do what I just see?

  Hi again

  Yes, you follow the process incorrectly. There is a big difference between clips of full movement in the library and what is published. That's the key.

  Note that I said to publish once in an intermediate situation. You do the clips exist outside of the. CP file. Then insert slides for each segment of full movement and import the associated clip where you posted to. Yet once, you must make sure that it is published as Flash 7 or it will not work for you.

  In addition, you need to remove the original videos of gliding.

  So reverse try it and see if you get a better result.

  See you soon... Rick

• I can't stop the automatic movement of the slide

  I can't stop the automatic movement of the slide.

  I have a slide of pointer with 8 blades. If I click between slides, the active slide will move in this position, when I just missed one that I wanted to move with the mouse. How can I stop this and respond that the mose is oriented to the slide.

  Better yet, saved for LV8.2.

• Captivate 9: how to stop the automatic progression of slides?

  I am very new to Captivate and I use 9.

  We want our projects to hide the skin of project so that the learner must always use the buttons on each slide that point us to the next steps to take.  I don't think not that taking the stop of the skin of the project of automatic reading of the project however. Place a button advanced or receded will do it automatically?

  Captivate 9 has many new features that may be useful for your lens, where my application to start a new thread.

  If you use the defaults of a regular button, it will run for 3 seconds and pause to 1.5 seconds. You can see clearly, when you insert this button in two places:

  1. On the timeline panel (don't forget to have it open all the time, this UI beginner he hides by default which is not a good idea): you will see the length of the timeline of button (to slide any longer to see the default) and you will see a vertical line thin at 1.5secs which is at the break (he has a break before this line symbol).
  2. In the properties panel, you will see the time and the pause time.

  If you don't want the buttons to pause the slide, you can disable this Pause feature in the properties panel.

  

  Since you mention the Next/back buttons, I highly recommend to use shapes with the functionality of a button. The reasons for this recommendation: take a look at this blog why I like the shape of buttons - 6 Captivate - Captivate blog once I presented a webinar for Adobe, only on form buttons. They can be used on master slides (but lose their integrated States, a bug in Captivate 9 which should be fixed) or put on the first slide and timed for the rest of the project. The screenshot was taken on such a form button.

• Variable width tool not work - cannot adjust the position of the points of width - Illustrator CS6

  Hello

  I'm having a Mare with variable width tool in Illustrator CS6...

  When I add points of variable width for a stroke I can't move the position of the decimal point of width. I watched several videos showing the width point slide seamlessly along the racing line - but I am unable to do this in my session of Illustrator!

  However, if I move the cursor width-tool on the end of the race only point, a (~) symbol will appear and I am able to slide that point only along the race. But this isn't a suitable way for me to realize the effects I'm trying since.

  I would be very grateful of any advice or experience with this issue.

  Thank you very much!

  When you create a new point width, you can move it in the direction of width but does not change its position. Howeven after the point is created, you can move your cursor near the point which is along the central axis of the race, to move along the racing line.

  You can also watch http://tv.adobe.com/watch/csinsider-design/illustrator-a-closer-look-at-the-variable-width - tool-for-illustration /

  Let me know this was useful.

• Anchor Point & Management Points conversion tool

  To quote: this:

  "To convert a corner point without guidelines from a corner with guidelines first, independent point slide a point of direction on a corner point (making a point of inflection with guidelines). "Release the mouse button only (don't release the keys to activate the Steering Point conversion tool), and then drag two points."

  My question is:

  Once you have moved from a point of direction, with the Convert Anchor Point Tool, is it possible to then move the two points of direction at the same time? Or should we use the Convert Anchor Point Tool to convert this point into a point of inflection?

  How and why should I use it? I do not know; I do I just know everything about management points.

  Yes, you can move the handles of direction chosen at the same time by making the scale/rotation (a tool for transformation), but you cannot move them without moving the Bézier point.

  Try this

  Draw, then select a circle

  Select > object > guidelines handles

  Use the rotation tool

• Need remote for Keynote / MacBook Air

  My presentation remote died. Looking for a replacement recommended to use with 2013 MBA running OS X 10.11.5 and Keynote 6.6.2

  I usually present in the classrooms, but I sometimes present in large rooms. Audio volume control a plus. I have the video project

  Thank you

  If you have access to an iPad or iPhone using Keynote Remote would be the biggest part of what you want.

  I don't remember if the volume control is available. For me, the benefits are the ability to see the next slide (on my iPad) and the ability to 'draw' on the slide to point clearly to one area on the projected image.

• Import data from PPT in LabVIEW

  Is there a way I can get the information on the forms present in a specific slide in a powerpoint presentation in LabVIEW. I was able to get the account information for all forms of a slide but nothing more. For example, I would need the dimmension of the shape and relative position!

  Use the properties of The object Shape Top, Left, height, and width.

  Top gives you the distance from the top edge of the object between the top edge of the slide in points.

  Left gives you the distance between the left edge of the object between the left edge of the slide in points.

  Height allows height of the object in points.

  Width gives you the width of the object in points.

  72 points per inch.

• When I right click on the files or the desktop icons, the normal menu does not appear

  When I right click on the files or icons on the desktop, the normal menu does not appear, but only the outline of a box.  The menu appears that if I slowly slide my pointer on the box.  Here is the menu starts with open but ends by properties.  All the help and get a fix on this issue, so it appears immediately as it did before?

  Hello

  I suggest that you reset the Visual effects, then check if that helps.

  (a) click Start, click Run, and then type sysdm.cpl

  (b) click on the Advanced tab

  (c) in the course of execution, click settings

  (d) click the Visual Effects tab

  (e) If you have custom settings, note the configuration in a document.

  (f) set it to adjust for best performance

  (g) click on apply

  (h) repeat the above steps and reset your settings favorite again.

• Advantage of ink HP deskjet 1515: why does my printer print fonts that are so small even read?

  So I bought this printer about 3 months ago and everything went smoothly... But last night when I tried to print a slide power point, it prints all of a sudden the texts which are so small... In fact I put it for 4 days by sheet until I print it, but then when I print, everything was compressed into 1 A4 paper... As I can't do anything... I tried to print other documents from ms word, but also have the same problem.

  @Adeanna

  Welcome to the Community Forum of HP.

  If I understand the question, then the problem MIGHT be that "Scale to fit" may be active and should be DISABLED on preview before printing.

  Printing PowerPoint: slide c. size printer Page size

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Windows 7 - in list mode, the files are moving on a click of my mouse?

  Windows 7 - mode list, when the double click to open a file, the first click causes the list of files to align with the left side of the screen. However the slider then pointing to a different file by the time I click on my mouse. This does not happen in the icon display?

  It won't happen if you use the single-click to open an item and Point to select,

  The file will increase but only after you have clicked on to open it.

  Just a normal bug in the list.

• Isuee on the size of the icons Internet Explorer used datepicker mask format (HH24)

  Hi all

  My requirement is

  I want to decrease the size of the datepicker element (I used the format HH24 mask).

  How it is possible to decrease the icon size date picker.

  Internet Explorer ver 8.0 from

  Theme-Simple gray 9

  Apex worm - 4.2

  Kind regards

  Thierry

  Hi ujwala1234,

  ujwala1234 wrote:

  My requirement is

  I want to decrease the size of the datepicker element (I used the format HH24 mask).

  How it is possible to decrease the icon size date picker.

  Internet Explorer ver 8.0 from

  Theme-Simple gray 9

  Apex worm - 4.2

  Instead of using the date picker, showing only HH24 and reduction in size of the datepicker, why do you not use timepicker plug-ins that would be easier to use.

  Reference:

  • -Point Plugin - Selective TimePicker
  • -Plugin - Slider TimePicker point

  Kind regards

  Kiran

• Is it possible to make a road like to follow the example in the Muse.

  Hello!

  Is it possible to make a road as in this example in Muse.

  kau - a - 942956.html #tag6 http://www.Spiegel.de/Reise/Fernweh/Reise-nach-Sotschi-zu-Besuch-bei-den-eisbadenen-in-MOS

  Yes. Look here

  Adobe Muse CC 7.0 tutorial | Slide Navigation pointer - YouTube

  David

• Chronology of scrolling Muse

  Hello

  I was looking around for a function that would allow me to add a timeline/progress indicator when you scroll through a Web site.  I don't know if maybe I don't know the correct name for what I'm willing to do, or if the feature does not exist, but I hope you can help out me.

  I am wanting to do something a lot, like what is at the bottom of the AQUATILIS EXPÉDITION site.  If someone can point me in the direction of a tutorial, or he can just tell me what to do, it would be much appreciated.

  Thank you

  Jake

  Hello

  Maybe this might help you

  Adobe Muse CC 7.0 tutorial | Slide Navigation pointer - YouTube

  I hope than that!

  David

• CP7 touches of complete "stop"

  I developed a course where learners must click correctly through a series of screens to complete the four scenarios. Many of the buttons appear in the report under the "quiz" so that we can make some common mistakes click-tracking, but only 4 buttons are added to the score. The last button of each scenario is the only button that adds to the total point. Pass mark is set at 4 points, because there are 4 scenarios. The learner can navigate through the four scenarios in their own way, and once the scenario of each is properly completed, they returned to a standard that has a checkmark displayed for scenarios that have been completed.

  So... here is my problem, I can not understand. Whatever order that scenarios are make in two or three buttons on the end, all of the module is suspended. I was never able to complete all 4 scenarios. The early work of large tree, the fourth stops a few buttons at the end is there a problem with the .swf/connect reports that the learner receives close to passage or something? I could see a problem once they finish the fourth scenario, but a few front buttons?

  I'm running on Win 7 (64 bit) CP7 using Adobe Acrobat Connect Pro for our reports. I have the latest version of the Flash player on my system. I tested the release of Connect module and executing the module locally (from my office). I tested in Firefox and IE. I've published using Flash 10 and Flash 11. I even opened in CP6 and published in Flash 9. Regardless of the location of the file, the version flash and/or handset browser I use, I always get the same question.

  Any suggestions/ideas/places to look for a solution?

  RobWard,

  Thanks for the tips. I like the idea of inserting captions that appear for the rest of the project, so I can debug variables. I had never thought about it and I'll use that in the future, projects, as well as this one.

  As far as this particular issue goes, I found a solution before you replied I want to document here and maybe get someone to clarify why it worked. I noticed that I was using the quiz feature without having a single question slide. I've been somply of custom buttons. I continued to read this quiz question slide has some features him (including statement completion, if I remember correctly), but I did not have a quiz results slide (because I had no question slide).

  I've added a question wrong (like the #1 slide) with points zero for the issue. When I inserted a question, the quiz results slide has been automatically added to my project (as the last slide... drag 119). I have hidden the results and the question (and made sure to delete them from the table of contents...) and the problem never happened again. All reports was perfect and he never hung on the last of the four scenarios.

  Problem solved... just do not know exactly why...