slide show by using the keys on the keyboard for nav in flash professional CS5 with animated images

Similar Questions

• slide show by using the keys on the keyboard for before back in flash professional CS5

  I'm a graphic designer who has a presentation of my portfolio. I'm not too experienced in flash and do not use it much, but he needs to do this on the thing. I can do a fade in and out slide show, but I want to create a slide show where the screen remains out of the blade and does ' t until what I press the next or previous button. I don't want these keys on the screen, I want to be able to press a key on the keyboard as F1. is this possible and do you know in adobe flash Professional (or other adobe products) where I could get resources/tutorials to do. Any help so what would never be great.

  the best way to do what you want (but not the most flexible/changeable) would be to add each slide a key frame to its own layer.  It is a design decision, but start with keyframes at 1, 11, 21 etc.

  create tweens to fade for each slide.  You'll probably want to fade out the image on image 1 (from frames 1 to 11).  Bland-in the image of frame 11 frame 1 to 11.  fade the image frame 11 11 to 21 etc.

  You can then use:

  var image: int = 1;

  var dir:uint;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, downF);

  function downF(e:KeyboardEvent):void {}

  {if(e.keycode==Keyboard.Left)}

  dir = Keyboard.LEFT

  Frame = Math.Max (Frame-10, 1);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  } else {if(e.keyCode==Keyboard.RIGHT)

  dir = Keyboard.RIGHT;

  Frame = Math.min (this.totalFrames, Frame + 10);

  this.addEventListener (Event.ENTER_FRAME, nextF);

  }

  }

  function nextF(e:Event):void {}

  {if(dir==Keyboard.Left)}

  prevFrame();

  } else {}

  nextFrame();

  }

  {if(this.currentFrame==Frame)}

  this.removeEventListener (Event.ENTER_FRAME, nextF);

  }

  }

• Using events QNX in the AIR for BB10 in Flash Professional 5.5

  I want to use the QNX events in my AIR for BB10 application in Flash Professional. As the playbook, am I supposed to add a few swc files in order to use the events I get compilation error?

  I want to use "CardCloseEvent", but it gives compile error.

  Thank you!

  No worries,

  GoTo file > settings Actionscript > library path

  Press on the +, then navigate to the DONKEY

  Note: If it does not allow you to add DONKEY - make a copy and rename it to SWF.  He worked for Flash Builder 4.5.

  For each ALBUM, you may need to click on it and press the I button and change it externally.

  I don't know how Flash Pro builds your packages well-, but put in right place.

  Ed.

• Using the keyboard for navigation

  I have a button I used but now is trying to get the entire script in one place on the main frame. I did it before usually have the script on buttons and other places. The key, called btnContinue, had this applied creation:
  
  (release, keyPress 'space') {}
  Play();
  }
  
  I want to do the same thing in actionscript. I know how to get the button to play, but how do I script things for the space bar to do the same thing? It's probably pretty basic, but I'm just starting to wrap my head around the possibilities of AS2 and scripts. great stuff.
  
  btnContinue.onRelease = function();
  Play();
  };
  
  Thanks for the help!
  Luke

  .

• Import a Lightroom 3 Flash Web slide show Flash Professional CS5

  Hello

  I am a photographer to build a site in flash for my clients, and I'm all done, except add a slide show on my page "Gallery". In 'Lightroom 3.2 RC', I built a custom «Flash Web, controllable slide show» How to import in my project "Flash Professional CS5?

  Thanks in advance.

  PS I tried to export the slideshow of "Lightroom 3.2 RC" and then import in "Flash Professional CS5." But whenever I do that, it only allows me to import pieces of it at a time. For example... When I go in the import menu in 'Flash CS5 of Profession', I am able to access the folder, but forces me to view the contents of it. For this reason, "Flash Professional CS5" only allow me to put in some records at a time, as thumbnails, then the medium-sized images, then the large images etc...

  Also when I discovered the file, even with a keyboard command (I'm on a Mac then command-A) will select all content. It makes me go to the folder, and then for the images, then I'm able to import these specific stand-alone images.

  In addition, "Flash CS5 of Profession" doesn't let me import specific functions, such as the java script files and index.

  If your slideshow is a swf file, you cannot import it.  you load by using the loader class.

  for example, if you swf is named ss.swf, you would use something like:

  var ldr:Loader = new Loader();

  addChild (ldr);

  LDR. Load (new URLRequest ("ss.swf"));

• Activate the Keyboarding for guest VM without clicking the window innto

  Hello

  I've set up an Ubuntu guest on a Windows 7 host machine, and I'm very happy with it. However, I have a problem:

  When I switch to VMWare Workstation by using the keyboard (Alt - Tab), I can not immediately entered anything in the comments via the keyboard. I always first click in the window.

  To make it more clear: what I do when I use a different program on the Windows host:

  1 alt - Tab for VMWare Workstation

  2. click in the window workstation

  3. use the keyboard to interact with comments

  What I want to do:

  1 alt - Tab for VMWare Workstation

  2 use the keyboard to interact with comments

  How can I make that happen? I would also welcome to use the keyboard, for example, press ENTER to be bale to use comments.

  Ahh, I think that I figured it by myself:

  There is a menu entry "Keyboard Grab", that is mapped to Ctrl-G.

  So I have to do the following:

  1 alt - Tab for VMWare Workstation

  2. press on Ctrl-G

  3. use the keyboard to interact with comments

• When I try to use the impromptu slide show I get the message "video support is disabled" how to activate it?

  When I try to use the impromptu slide show I get the message "video support is disabled" how to activate it?

  It is a "Bug" in the software, waiting for a fix.

  It can be corrected temporarily by open images in the slideshow beforehand module and run the slide show IN THE module.

  When you return to the library grid view, the impromptu slideshow (Ctrl + Enter) will work.

• Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  You can apply the opacity to images or defining a key position for slide show as well as with the page highlight opacity changes and will bring similar effect.

  Thank you

  Sanjit

• FN key should be activated to normally use the keyboard

  Computer keyboard works as if you press the FN key all the time, any ideas on how to return to the keyboard works normally. If the FN button is not pressed, the character of the place the button appears on the screen

  IM assuming a ctrl + shift, ctrl + alt code be pressed to return back to normal k/Board.  Thank you very much

  Hi DEREKMULVANA,

  1. what operating system do you use?

  2. who is the manufacture of the system?

  3. which system do you use is a desktop or a laptop?

  4. what exactly happens when you try to use the keyboard?

  5. how the keyboard connected?

  6. What does "character on the square on the button appears on the screen.

  7. what you're trying to put on the screen?

  Try with another keyboard and see if the problem persists

• do I need to use the product for the management of the recovery key to refresh the window 8.1?

  do I need to use the product for the management of the recovery key to refresh the window 8.1?

  No, the product key will be automatically read from the BIOS.

• Now, many of my keys are shortcut keys. For example, 'L' now disconnect me and "N" takes me to the computer. I can no longer use the keyboard.

  My big cat crossed my laptop keyboard Dell (with Vista) and now many of my key take me in crazy places. This happens in all programs. I can't use the keyboard to type. Is anyone know how it happened and how to fix it?  Thank you very much

  Hi Ruby94947,

  Things you want to try:

  O examine your keyboard for any accumulation of dust, dirt, liquids or other particles that could be causing the keys to type characters.

  Ø Disengagethe (FN) key on the keyboard, make sure that the led of the button turns off.

  O check if your number lock (NumLock) key is enabled. If so, the key to disengage.

  O confirm that your keyboard is set to the English language.

  1. open regional and Language Options by clicking the Start button, click on the Control Panel, clicking clock, language, and region, and then clicking regional and Language Options.

  2. click on the keyboards and languages tab and then click on change keyboards.

  Make sure that the keyboard is set to the English language.

  If the problem persists, contact DELL for assistance.

  http://support.Dell.com/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Create a slide show and change the image by clicking on it? (!)

  How can I create a slide show and change the images by clicking on them?

  here you can find an example: http://www.thisiscatalogue.co.UK/around-the-way/

  Thank you!

  solved

• An audio legend attached to a photo is not imported in a slide show, even if the option include

  * An audio legend attached to a photo is not imported in a slide show, even if the option include Audio legends as Narration is selected.

  Is this always true?  The problem has been fixed?  I just tried and it does not work for me.

  With the help of Photoshop elements slideshow, Windows XP

  Sorry, I can't be a great help in this regard - maybe someone else can help.

• Arrow keys on the keyboard. Try to use the keyboard and mouse.

  New Gateway laptop with windows 7. I play a lot of games online and I can't find anywhere how to change this, or if it's the phone or the operating system. When I try to play a game on IE with the arrows that they automatically stick causing the game almost impossible to play, also when you try to use the keyboard and the touchpad the touchpad locks when the keyboard is in use. Help, please.

  It is a known problem if all goes well with Flash and Internet Explorer.
  Source: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/d006871e-4701-4e80-9062-197f28251ac5/

  The only thing you can do is use another browser until what Adobe fixes the problem.

• Play the Spider Solitaire Vista using the keyboard

  Hi, I have recently acquired a new computer with windows vista. Also, my old computer has windows vista. I am a big fan of Spider :) solitaire However, I don't like that play SS with my keyboard... I hate using the mouse. On my old computer, I had no problem using only the keyboard. Now, with this new version of vista (?), I can only use the keyboard to show me the clues... Shortcut keys changed? or y at - it no hotkeys on this new version? Thanks for your help!

  Hello Darcrista.

  I don't think that Spider had functional changes between Windows Vista and Windows 7.  The arrow keys and enter still work here.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)