Slide slide to unlock will not start up an iPad.  In the upper right corner is also a symbol of hald-moon.

Hit to swipe "slide to unlock" doesn't let me get into the iPad.  After trying to swipe it just stops and the screen will Dim.  In the upper right corner is also a symbol of halfpipe.

On the Slide to Unlock screen (but before swiping) try to drag the control center to the top of the bottom sliding upward. If the pipe is lit (bright) try turning it off to see if it helps...

If not try a Forced restart of the slide for... screen.

Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

Tags: iPad

Similar Questions

  • Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

    Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

    It would be helpful to post what the screen says.

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    Subject of memory NVRAM and PRAM

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  • All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

    All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?


    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to If she finds something or not does not mean that you should not
    check with the other methods below.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free

    SuperAntiSpyware Portable Scanner - free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool

    Microsoft Malicious removal tool - 64 bit

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.   <-->  <-->

    Choice of PCmag editor - Prevx-, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).


    If necessary here are some free online scanners to help the


    Original version is now replaced by the Microsoft Safety Scanner

    Microsoft safety scanner


    Other tests free online


    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista


    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)


    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)

    You can try a repair install or an upgrade in Place.

    You can use another DVD that aren't copy protected but you you need to own
    Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
    machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
    good backup or 3 (security in redundancy).

    On-site upgrade

    This tells you how to access the System Recovery Options and/or a Vista DVD

    How to perform a repair for Vista Installation


    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.


    If you are in North America, you can call 866-727-2338 for virus and spyware help
    infections. See for more details. For
    international information, see your subsidiary local Support site.

    Microsoft support - Virus and Security Solution Center

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

    I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

    It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.

  • My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

    Hi Joshua,.

    I think you found the turning wheel on the Adobe CC application.

    Please check the help below document:

    Does not open App | Wheels of progress turn continuously

    You can also view the nets below where this issue has been addressed:

    Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

    Creative Cloud Desktop App taped blue spinning wheel after update.

    Kind regards


  • Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

    Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

    There are dozens of discussions in this forum that describe the fix

  • need to put a strip of black or another behind the link of note and a welcome disconnect on the top right corner


    I need to put a black or other tape colored behind the note link and a logout user welcome on the upper right corner. The band will go from one corner to the other corner of the screen.

    How to achieve this requirement.

    Please give an idea.


    Thank you

    Chandra Bhanu

    Very easy to do with css. Depending on your theme and design the right identifier you can place a css attribute in the section of the page under css inline, which looks a little like this:

    #uHeader {background:.. .your color here ;}}

  • The history icon is not in "three vertacle dash" icon in the upper right corner. Where is he?

    On my Firefox page there is no menu history in the "three vertical dash" button on the upper right corner of my Firefox page. What happened to him? The things that I am saying go to the button and click history, who's not here.

    He should be here, with an icon that looks like a clock.

    If it is moved, you can try to use customize it to find. There should be a button to customize at the bottom of the menu again.

    If you don't have time to search around between the toolbars, you can also use the classic menu bar temporarily: press the Alt key to display it at the top of the window.

  • Many of my photos in Lightroom have exclamation points in the upper right corner of the file.  I can't export, modify, or doing something with those photos.  They system (Lightroom) tells me that the files not found

    Many of my photos in Lightroom have exclamation points in the upper right corner of the file.  I can't export, modify, or doing something with those photos.  They system (Lightroom) tells me that the files not found

    Hi Jenny June,.

    Please take a look at the following article, it should be useful:

    Kind regards


  • I recently installed the addon Desstroy The Web, but it is not appear in the upper right corner where they usually do, why is this?

    My firefox is updated, but it will not show the shortcut in the upper right.

    Hi, it has not been updated since February 2013, so can be is no longer compatible.

    You can check if it is installed by looking in modules (Ctrl + Shift + A) Manager > Extensions.

    You can see if the button is on the menu of the bar-3 - or the palette to customize, from where you can drag it to a toolbar: controls customize Firefox, buttons, and toolbars.

    If your question is resolved by this or another answer, please take a minute to let us know. Thank you!

  • SWR30 screen not refreshing and Medic (+) icon in the upper right

    My SWR30 just started showing a Medic ICON in the upper right and the screen stops refresshing and visualize simultaneously until I press the key.

    The mdic icon looks like:



    After I pressed the button, it freezes again after about 15 seconds.

    Also the entire screen is drawn with diagonal lines 45 degrees giving the greyed out.

    Anyone know what is happening?

    Battery is full the phone so much SWR30 and Xperia.

    The icon is the icon of power management and it seems I have activated the endurance mode!

    Take the SWR30 out of the endurance mode solved my problem.

  • Satellite C660D - 10 d will not start unless I have remove the battery and reinsert

    Present a strange problem that I can't solve.

    Brand new, open all laptop worked perfectly.

    Turned off normally and left it overnight with the power supply connected.

    Next day morning pushed the button market / stop the portable green power on but light did not start.

    Press and hold the button for 10 seconds does nothing.

    I remove the battery for 10 seconds and put again and then you press the power button and you get a full boot up normally.

    Everything on it works perfectly, you can restart the laptop without problem, you can even turn off then turn on half an hour later with no problems.

    This problem occurs only when it is off and that the power is plugged in for several hours.

    Back to toshiba warranty, I've attached a note explaining the problem and even returned what he locked up so he wouldn't turn until they removed the battery.

    10 days later they returned it saying that the intensively checked the laptop and found no abnormalities.

    I plugged the battery and pressed the power button / stop and the same question once again outside of this period, that the fan runs for 2 seconds then turns off, I removed and re inserted the battery about 15 times before it started normally.

    Last night went out as normal and this morning the question of the standard of don't turn is not on at all.

    Just to clarify him when the power supply is left connected overnight or for several hours so that the system is power off the laptop does not start, the Green led lights, no fans spin, no sign of life. One way to start is to remove the battery for 10 seconds.

    I've been on toshiba again and said that if I return it a second time and they can't find a fault that I would have to pay £80 for it returned. I recorded the fault to prove that they is a fault but they seem not interested in that.

    Up to now, the bios has been updated, reinstalled windows, I can't replace drive HARD or RAM that the warranty will be voided. However issue and im 90% that this is a motherboard.

    All the ideas that I'm completely stuck on this one!

    Sorry to hear you I have a problem with your laptop.
    Problem you have is certainly hardware related issue and it should be solved by Toshiba.
    In my opinion you should not spend money for new parts, trying to solve this problem.

    Laptop warranty valid and should be set the laptop for free.

  • Satellite A65 will not start and I get only the blue screen!

    When I start my satellite A65 a blue screen comes up saying "a problem has been detected and windows has shut down to prevent damage to your computer.
    It says to check if I have enough disk space or to disable or update the driver, if a pilot has been mentioned in the stop message... or to check the updates to the bios...
    I can type everything that said if I need, but the jist

    The world is - that sound familiar at all?
    It may be because I was not updated enough when he told me to.
    It does not start, not even on safe mode, and it won't let me not restore, which I would be perfectly willing to do at this point.

    help, please


    The blue screen of death usually occurs because of the serious software problem or due to malfunction of the equipment.
    In your case, it looks more like something wrong with the hardware. Why, because you're not able to restore the laptop from the recovery CD Toshiba delivered!

    Need buddy? I think that the laptop should be verified.
    Try to contact an ASP in your country and ask for later handling.

    Good luck

  • Palm TX will not start without being plugged in the AC adapter / CC &amp; WiFi turned off completely during authentication device

    My daughter just got a Palm TX away two days ago.  I have 2 questions - we have plugged and loaded as described in the manual, but no matter what I do, it does not start when it is disconnected from the mains (first edition).  When you are connected to the wall, the unit seems to work correctly except for the WiFi, which causes the device to stop trying to autheticate on my network ((deuxieme question).  The only way I can get the unit to turn on once it has closed is with a soft reset while being plugged into the wall.  Once I have unplug the power cord, the device stops and does not start at all with a soft/hard reset either by the power button.  I did a full hard reset last night and let it charge again for 3 hours plugged into a different plug, but I still have the same issues.  Is there a fix or the update available that solves these problems?  Is my daughter S.O.L. because the device is obsolete and is no longer officially supported by Palm/HP?  Any help or idea would be greatly appreciated, thank you!

    Daddy geek

    Hello geekdad, sorry to hear about the TX problem.

    The TX debuted in 2005.  Your looks to the battery is dead for a long time and has other problems as well (Wifi kill him).

    There are websites that will fix Palm PDA, if you choose to do so. is one, one another.


  • How can I move my Start button in the upper right corner, to the lower left corner, where it used to be? __

    try to get my Start button to the lower left corner

    Click and hold the left button of the mouse on an empty spot in the task bar, and then drag it to the bottom of the screen. Boulder computer Maven
    Most Microsoft Valuable Professional

Maybe you are looking for

  • My laptop Satellite A100-147 won't boot to the top

    my computer laptop satellite does not start until past the screen "in contact with toshiba" unless I press and hold zero and the power button

  • Qosmio G30 PQG32E - green vertical bars

    Hello I have a Qosmio as object at startup I see a vertical green bars it is second time I have this problem.First time I have send the laptop to repari and support the M/B change... when returned everything ok but after 1 month even problem... now I

  • Flag 23: Accidentally deleted data recovery

    Where can I order the recovery for PC Hp Pavilion 23 disc. Please help

  • How much time does it take for my laptop overheating?

    I have a laptop Dell Inspiron N5040 and I would like to know when it overheats, because it has never overheated before and I'm afraid when he could.

  • TCP Comm send the Hex data

    I have an embedded device server that has a controllable set of 8 pins of the user. The format of order for these pieces requires a TCP message which is 9 bytes long and hexadecimal. I use TCP Communicator - Active .VI in the LV7.1 examples, make a l