Slipstreaming windows 2003 with Raid drivers
Hi all
I am creating a slipstream disk to install the raid drivers. I did it before using the program n - lite with great success, unfortunately this time it doesn't. So, I checked the forums for how to do it manually. I followed these steps http://support.micro...om/?kbid=288344
This makes me through loading the driver and restarts, then restarted and enter in install windows server 2003 fails with the error message "an error was encountered, which prevents the installation to continue. internal configuration data is corrupted (phase0). Press ok to view the Setup log"
The Setup log shows "installation internal data structures are corrupted (phase0).
Any ideas?
Hi Tuono,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/winserversetup/threads
Tags: Windows
Similar Questions
-
Windows 2003 Server Chipset Drivers required for a Tecra M91E
Hello
No one knows the location of the Chipset drivers for a Tecra M91E running Windows Server 2003.
Thank you very much
Windows 2003 is not supported on Toshiba laptops. You have to understand the meaning of the words of mobile computing. You want to have mobile unit or server?
-
Installation and optimization of Windows 8 with RAID
Original title: windows installation in dell inspiron 8 5523.
Hello
Recently, I bought a dell inspiron with 32 GB ssd and 500 GB of hard drive.
I try to install fresh windows 8.
someone please give me step by step of the instructions for installation and optimization with RAID.
concerning
Hi Venkatavaradhan,
1. who is the current operating system installed on the PC?
2. what exactly happens when you try to install the Windows 8?
Refer to this article on how to install Windows 8.
How to perform a new installation of Windows
http://Windows.Microsoft.com/en-CA/Windows-8/clean-installTo install Windows and optimization with RAID, please post your request in the TechNet forum.
Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/w8itproinstall/threads
Hope this information helps. If you have other windows related to queries, we will be happy to help you.
-
Pavilion dv6t-2100: upgrade to Windows 10 with missing drivers
Hello
I just upgraded ti 10 Windows successfully resonable. There are drivers (4) that I can not find:
Camera PCI\VEN_197B & DEV_2383 & SUBSYS_3659103C & REV_00\4 & 9078216 & 0 & 03E4
Camera PCI\VEN_197B & DEV_2384 & SUBSYS_3659103C & REV_00\4 & 9078216 & 0 & 04E4
Camera PCI\VEN_197B & DEV_2382 & SUBSYS_3659103C & REV_00\4 & 9078216 & 0 & 01E4
Device ACPI\HPQ0004\3 & 11583659 & 0Help, please. I want to stay on Windows 10 and not roll back to Windows 7.
Kind regards.
Hello:
You need these drivers...
For the first 3...
This package contains the driver for laptop models JMicron card reader supported and operating systems.
File name: sp45010.exe
For the last one...
-
Printing images inserted on Windows 2003 with some of the top printed at the bottom
The printer is a Photosmart D7560. Images inserted into a Word 2003 document were still part of the top (which seems to vary) printed at the bottom of the image, despite the Preview Print shows images correctly. The text above and below the pictures will print correctly. Document prints correctly on a Canon i850 printer.
Ok. I lowered my butt and try the HP Deskjet 450 driver first. He wouldn't do anything. I then tried the 990 c driver and here, the photos printed OK. So, I conclude that the programmer who made D7560 h driver was working Monday after a 3-day weekend. But this is a good interim solution. I doubt if HP will repair the driver D7560 h, but at least I don't have to rely on the Canon i850, if she should die an untimely death.
Thank you!
-
Communication between two network cards on windows 2003
Hi all
I need your help.
I have a machine virtual windows 2003 with two network adapters.
NIC 1 - external - 192.168.1.101
Map NETWORK 2 10.10.10.1 - internal -.
I've configured to operate as a DC and DNS serving 10.10.10.x network.
DNS is configured to resolve before on 192.168.1.1 as redirector DNS requests.
I have other machines connected to the 10.10.10.x network.
They can ping 10.10.10.1, they can ping 192.168.1.101 but not 192.168.1.1
I want to just be able to talk to 192.168.1.1 and be able to access the internet.
No firewall between the two.
Command-line may help, but I would need your help.
Hello Prasad,
The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please post your question in the TechNet Forum.
Hope this helps you solve the problem, if any question you can write us and we will be happy to help you further.
-
RAID drivers that support Windows 2003 server for Qosmio G30 - 153
Hello
Where can I find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153)
Thanks in advance.
HaquetteHello
Windows Server 2003 must support the XP drivers.
Then, try to search RAID XP drivers!cordially :)
-
Where can I find RAID drivers that I must apply for 8 Windows Installer?
I have a hp pavilion ultrabook 14-b112eo and after raids on hard drives, I provide the 8 Windows install with drivers RAID. I looked at this page:
who provides the drivers for my laptop, but I can't find appropriate other than those. Any ideas?
Hello:
They can be found in the Intel RST driver file (under storage in the link you posted).
You can also get them from the link below (first file listed).
The RAID driver for your model that is necessary, must be the controller Intel (r) Mobile Express Chipset SATA RAID.
I do not understand why W8 for these drivers. I thought they would be already included.
-
How VM Windows 2003 can I make it work with the following equipment
Hi guys,.
Suppose that I buy the server below. How VM Windows 2003 I can ru without performance issues. With resource allocation obv.
PowerEdge R610 Rack chassis for up to 6 x 2.5 "hard drives
|
Catalogusnummer:
SV4R610REL 282823
Module
Tricky
ProductCode
SKU
ID
Base
PowerEdge R610 Rack chassis for up to 6 x 2.5 "hard drives
205064
1
Additional processor
No additional processor
205078
2
Geheugen
32 GB memory for 2 CPUs, DDR3 1066 MHz (8X4Go RDIMMS)
205192
3
Economic stations
16 X DVD +/-RW SATA Drive ROM
205109
16
Shipping documents
R610 shipping Documents EMEA1 (English/French/German/Spanish/Russian/Hebrew)
205065
21
Basic warranty
1 jaar basisgarantie - next business day
206049
29
Ondersteuningsdiensten
Basic 3 year - next business day warranty
206123
30
Installation services
You have chosen not to take the Dell PowerEdge installation service
76588
32
Systeembeheer
DVD of the System Documentation and Dell OpenManage electronic for PowerEdge R610
205116
49
Rackmontage voor rails
Not included the racks
11433
88
Order information
PowerEdge order - Belgium
32377
111
Processor
Intel® Xeon® E5540, 2.53 Ghz Cache 8 MB, 5.86 GT/s QPI, Turbo, HT, 1066 MHz Max Memory
205495
146
Power cable
Power cord, PDU (Rack)
5605
207
2nd hard drive
(4) 300 GB, SAS, 2. 5 - inch, 10 K rpm additional hard drive (Hot Plug)
205590
217
1 RAID - SCSI-controllerkaart
6iR SAS internal RAID controller card
212046
278
In of fabriek voorgeïnstalleerd besturingssysteem
Not included
8007
285
OMLIJSTING vooraan
R610 Rack bezel
205115
669
RAID-connectiviteit
CFI: RAID 5 + spare. Min 4 HDD
274642
1009
As
Power output high, not redundant (1 power supply), 717W, BIOS Performance parameter
205113
1015
1 hard drive
300 GB, SAS, 2. 5 inch, 10 K RPM Hard Drive (Hot Plug)
205569
1209
TCP/IP Offload Engine Enablement
Ethernet embedded Broadcom Gigabit LOM with TOE 4 p
77384
1310
Serverbeheerkaarten
iDRAC6 Express Server Management Card
205619
1314
> Why should I the extra CPU?
UH... because you ask how much Windows 2003 virtual machine, you can run... I GUESS that means more out... That more CPU more the better overall performance of ESX, VM and ESX operating system are designed to work on ALL hearts, so the more hearts of better performance.
In your config version right now, I wouldn't go above 20 VM. as you plan to use only 1 hard drive?
If you use 1 disc, you realize that you have only 1 disc do all the work... right?
-
Install windows on mac pro (early 2008) in other SSDS with RAID card
Guys, good evening to all the same time.
I get out of this crazy short, I ask humbly help.
I explain my problem:
I have a Mac Pro (early 2008), with RAID CARD MEDIA
He does not then I "gave" to my mother who must use windows for work.
I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.
one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.
and here the problems begin:
When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives
After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)
but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.
Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?
Thank you so much in advance.
A welcome message
Ruggero
If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:
.
-
Satellite A100 - 906 PSAA9E: I can not find drivers for Windows 2003 Server R2
I found and installed some drivers of http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU
Look at the screenshots of my computer, please.
Window "Device Manager":
http://www.DISA.HO.com.UA/Toshiba/1.gif
http://www.DISA.HO.com.UA/Toshiba/2.gif
http://www.DISA.HO.com.UA/Toshiba/3-1.gif
http://www.DISA.HO.com.UA/Toshiba/3-2.gif
http://www.DISA.HO.com.UA/Toshiba/4-1.gif
http://www.DISA.HO.com.UA/Toshiba/4-2.gif
http://www.DISA.HO.com.UA/Toshiba/5-1.gif
http://www.DISA.HO.com.UA/Toshiba/5-2.gif
How can I solve this problem?PS: sound does not work
Hello
As mentioned above, you will not find the Toshiba drivers designed for Windows 2003 R2 server.
But don t worry, and don t give up.
Windows XP drivers must simply be compatible and you should be able to install the Xp drivers on the Win2003 Server operating system.Good luck
-
Satellite A100 PSAANE - need drivers for Windows 2003
Hi all
I try to search the Internet for satellite a100 PSAANE drivers for windows 2003 but I can not find...
Can someone help me please!
Hello
You won't find these drivers anywhere
Win 2003 uses Win XP as the basis
This is why you must use the Win XP drivers!Visit the European driver of Toshiba page and choose the satellite A100 PSAANE
http://EU.computers.Toshiba-Europe.comThen, you will get all the drivers for Win XP
Good bye
-
Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?
You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?
-
Windows 2003 server has been restarted with the event ID 1003
Hello
We have windows server 2003 with sp2 and gets recharged every day 2 times and get the blue screen also please find the error code received on the below Event Viewer:
Error code 00000019, parameter1 00000020, parameter 2 8a2fc0e0, 8a2fc258 parameter3, parameter4 8a2fc100.
Microsoft verification items, we found once article to fix the fix that is mentioned below:
===============================================================
Article (s): 2280732
Language: English
Platform: i386
Location: (http://hotfixv4.microsoft.com/Windows%20Server%202003/sp3/Fix333407/3790/free/421007_ENU_i386_zip.exe)
=========================================================================
could you please let us know because we can see the fix above is with sp3, but the server who has has question is having SP2 that we have tested in the test environment.
We can with the same fix to install on the server production or any other solution for this problem.
Please answer as a priority, since we have the issue on the neck.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
You need to ask the Forum server later here.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Hello
Anyone know if the Windows 2008 R2 with Windows 2003 forest functional level domain controllers will be always supported after Windows 2003 support ends in July 2015?
Thank you
This issue is beyond the scope of this site and must be placed on Technet or MSDN
Maybe you are looking for
-
I had a problem with irritating noise since getting my A60. Whenever I start one of the games I have installed on the laptop the sound effect Manager always changes the setting 'Career' and I have to minimize the game and restore manually. It is done
-
unsupported game: why the most of the games does not work on windows 7?
Why do most games doesn't work on windows 7? If yes how can I do?
-
Bij laatste W7 works AVIA tv kaart niet meer meeting W Media Center update
Kaart wordt net meer herkend.
-
Is - this here in any way convert 100K black 30 c, 30 m, 30y, 100 k black rich in acrobat pro.
-
Premiere Pro 2015.3 transcode Vs Proxy
Hey,.Recently I've been tested a new workflow using the feature to ingest it in first. I did tests with the two Ingest functions: transcode and create Proxy and I was wondering what would be the differences. For me, I was able to be bound to the tr