Slow buffering when shooting in burst mode high with my 7DMarkii... What is the fastest SD card?

Similar Questions

• When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?

  Can you try to change the shortcuts = active on all entry Points setting?

  Change of Shortcuts=%Programs%\Check Point\Identity Shortcuts=%Programs%\IdentityAgent Agent

  In this way, we can see if it's the second folder level do. Because when I use only one file, I don't get the issue you reported.

  Out of curiosity:

  It is a Security Check Point Software? What is doing? It works like a ThinApp package?

• Slow printing when printing on 6x8inch paper. With the help of my new printer HP Deskjet 1514.

  When I print on a page size 6 x 8 inch using black ink, the time taken to print the page is 1 Minute 40 seconds. It is indeed very slow!

  When I print the same exact pages on A4, the time taken to print the page is 15 seconds. This is acceptable!

  I use Windows 7 and Office 2007.

  In addition, no error message is displayed.

  Help, please!

  What are the parameters of type of paper? The speed to 6 x 8 paper resembles results would happen if printing on photo paper.

  If you are printing on plain paper make sure plain paper is selected in the driver.

• Keep having to disable and reactivate my IDT High Definition Audio CODEC, what's the problem?

  Hello!

  I have a Pavilion Touchsmart Sleekbook 14 "with Windows 8, I bought the news about 7 months ago. I have not yet updated to Windows 8. 1.

  Recently, I noticed that my audio suddenly stops working. This happens usually when my computer has been asleep and I start it again. No sound through headphones or loudspeakers when I plug them in. I have not tried external speakers, but I imagine that the result would be the same.

  If I go into my device manager and disable and re-enable the IDT High Definition Audio CODEC the sound comes back. All the audio devices I have listed are associated with this IDT High Definition Audio. I tried to update the drivers, but he informs me that the most up-to-date drivers is already installed.

  I'm not entirely sure what causes this problem, but I remember to install a HP Windows Update or a while back about IDT High Definition Audio. I think it's an optional update.

  EDIT: after doing some more research, it looks like it is related to that Windows update and compatibility of their audio driver IDT with Windows 8 or 8.1 does not look very good. If all else fails I'll try to uninstall the IDT CODEC all together and use default HP audio.

  Someone at - he found a solution that works for them in this regard?

  Thanks Viktoria, thank you for spreading the word

  If you can mark my post on this topic with an acceptable Solution and Bravo, it help me and will allow the post to appear more frequently on research conducted on the Internet. Providing congratulations to my other posts about the issue would help a lot

  As I said, I will change my guide to troubleshooting on the issue soon (probably in the next day or two). There is no more sense to have the fix for a problem with crazy

  Mario

• Repeat the questions of character: will not repeat when maintained key (even after change of repeat speed & delay at the fastest)

  When I type characters (as well as the arrow keys and backspace) etc they will not repeat when the button is kept pressed and you must wait a few seconds before being able to repeat a character or go back and delete a mistake!  This has been a problem since I accidentally leaned on a button and he kept extensible - a message box emerged by asking (I don't remember verbatum what he said) if I wanted to stop this does not happen - and in my drowsy State, I felt just OK!  I disappeared in the 'control panel' and changed the character of repetition and time short and fast many times and it never changes nothing!  I noticed that when I connect to my computer the character repeat works normally.  I'd appreciate any help because it is frustrating and annoying say the least!  Thank you, Danette

  Hello

  1. have you made changes on the computer recently?

   
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue.
   
  Step 1.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step 2.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

• When I apply the criteria to view it doesn't work, but when I apply it through query it works. What is the problem with my approach?

  Mr President

  If I ask a condition through my option of criteria of view vo it doesn't.

  

  The result is that it doesn't.

  

  And if I apply a condition through my query vo option it works.

  

  The result is ok as follows when I apply vc in query

  

  What is the right way to create a vc.

  Concerning

  The first thing that seems unfair, is that I don't know what version of jdev you use.

  If I ask a condition through my option of criteria of view vo it doesn't.

  and the image below, I do not understand. I see a view Definition of criteria dialog box but not when you apply the criteria.

  the third image shows the definition of criteria, but I don't see where you apply it to or source of dialogue.

  Timo

• Since the last update to Photoshop lightroom when I import images come up black after import, what's the problem?

  Since the last update to photoshop lightroom when I import images they come black what is the solution to this problem?

  Hi sabina_arslan,

  Please follow the steps below:

  1. Disable apply tone controls auto under Lightroom preferences > Presets tab
  2. Restart Lightroom and then import images again.

  Kind regards

  Claes

• Forcing a file DOWNLOAD vs open a file when you click on a link... What is the best way to do it?

  Hi all

  What is the best way to ensure that when a user clicks a download link on a web page that the file is actually downloaded rather than the file open in any program can read? For my case, this includes two types of files, video files (.wmv, mainly) and .pdf files. I want my users to browse I provide for them, then they choose a link, click and the file downloads, NOT to have them play/open.

  I started researching on this last night, and the best I could come up with was the suggestion to add "& action = 3Dsave" file as a query string name. So, me being curious, I tried without success to find out whether A) the right way to do it or B) If this query string is the code appropriate to today's standards.

  I looked on the Web site of w3c.org not knowing if it was something that was of their Kingdom, but their website has been revamped and is now so cinfusing to navigate that one must become a software engineer to understand.

  Any help on this would be most appreciated. Thank you!

  Sincerely,

  wordman

  Create a file with the same name as the video/pdf file but with the extension .php. Insert the following code at the beginning (NO space before that in the file):

  <>

  Header ('Content-disposition: attachment; filename = yourfilename.xyz');

  Header ('Content-type: abc');

  ReadFile ('sourcefilename.xyz');

  ?>

  Replace with the file name to "yourfilename" above. sourceFileName may be the same. This gives you just the ability to change names.

  You can find a list of the types mime here: http://en.wikipedia.org/wiki/Mime_type

  If you know php, you have a lot of files, it would probably be easier to have all the links go on one page with the filename and mime type as parameters. You would then use the simple substitution to do the rest.

• Captivate 8 - click boxes and bar of the player when shooting in 'Training' mode

  Whenever I have the movie in training mode I have the settings so that the click boxes will be automatically added to the project; However, every time that I read the slides that have the auto added click boxes, of the Player bar does not appear. I then manually replace the auto added boxes. When this is done, the Player bar reappears.  Looks like a lot of effort. Any ideas?

  It is a design logical for me, if it were not the case I would disable the PlayBar manually. If you have a PlayBar, the user can simply rub with the progress bar and not learn anything at all. Training assume they can only progress when after completing action on each slide, either by clicking on a location or type a text in BER.

• When I go to mode full screen, my favorites, address and the toolbar of the tab lines do not disappear!

  And, Yes, I use the latest version of Firefox!
  It looks like this:

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Full screen, you can right click on a toolbar (toolbar tabs) space blank and click "hide the toolbar.

• Just bought a msi gtx 750 ti OC edition.when installed does not start, ends with a black screen and the cursor

  As indicated in the title, I bought a ti 750 gtx.

  N750Ti-2GD5/OC

  The machine had a 620 in gt and works very well with it in. When I install the ti 750 gtx, however, the boot system hangs on a black screen with cursor / underscores and a single beep.

  The system is a h8 1203, with a power of 460.

  I also have a gts 250, that also installs and works fine. Ive read a little, and there is a problem with this map and the hp system? something about the type of bios? I couldn't quite follow what has been said.

  Hello

  If you upgrade to Windows 8 (UEFI-mode Setup) and apply the BIOS posted updated so you should be able to work to the video card.

  Don't forget to create a set of external support of HP recovery before installing a new operating system.

• When I transfer a file from photoshop into indesign, what is the best format for printing purposes?

  Let me give you a little background here. I do my mini portfolio. It is a collection of works of my choice. I place objects in Indesign. I placed Indesign and Illustrator files in Indesign without going through problems of impressions pixelated. When I placed a Photoshop file in Indesign my pixelated image slightly. Guys can help me solve my problem? Thank you.

  You must ensure that the files have a sufficient number of pixels at a certain size and a certain ppi.

  For example, to print an image of 8 x 10 inches at 300 dpi, you need 2400 x 3000 pixels. (8 x 300 per 10 x 300)

  If you resize the image upwards in Indesign, the ppi will be reduced. Choose the image and let effective ppi in the links Panel.

  If th pixelation only happens in Indesign and not when printing, do a right-click on the image in the layout and choose display performance > high quality display.

  You can also set in display performance preferences.

  But what you see in Indesign is in any case an overview of reduced quality, not the original.

• My document Pages when sent in PDF format opens with Acrobat Reader and displays the text pane

  Hey team

  I am a new user of recent Mac and I have some difficulty with the Pages.

  I'll create a new document and save it as a PDF file (save it to the desktop), when I open it again, it opens with Acrobat Reader and the text released along side this one pane. It does not open a document own stand alone. This cause me a problem when I want to send it as an attachment, as it includes this component, as well as all other toolbars with.

  Any help on this would be appreciated.

  SSA56,

  When you send the PDF document as an attachment, it will be sent as a document 'stand alone '. It will be open according to the preferences that are set by the receiving party.

  

• vRA: identity device or vSphere SSO when there are multiple vCenters (each with their own SSO) in the environment?

  The installer: We have multiple vCenters each with their own SSO. We must build a minimum install vRA lab 6.1 and used the SSO to the vCenter which is the endpoint lab (and ended up having problems when this vCenter SSO had to be rebuilt and in turn liquid reconstruction vRA). Building on a vRA 6.2 Distributed Lab (based on deployment in the 6.1 reference architecture) to validate our production plan and decided to use the identity.

  Question: For a production buildout there is no reason not to use the device of the identity (scalability, performance, lack of HA)? If you are using vSphere SSO, when there are multiple vCenters one that should be used for SSO of vRA? If that vSphere SSO is never removed (say on the whole things are replaced by a central SSO for all vCenters rather than each on their own, or some issue needs to be rebuilt) is there a clean way to repoint SSO vRA without a reconstruction?

  Post edited by: RebeccaW (removed unrelated to Postgres question)

  What I did in this case is to build a fresh cluster SSO using vCenter SSO and pointing vCAC on this one. It becomes my main source of SSO and I slowly vCenters point and other components to it overtime. You usually put vCAC SSO signed certificates and generally I find people vCenter SSO deployment in this way. To remedy this trying to modify an existing SSO vCenters and risk having to reinstall your VC because you missed the CERT, simply create a new. This also alleviates a changing overtime vCenter and spoil the vCAC SSO. The unit of identity cannot be clustered or joining existing areas of SSO. So if you are looking for HA and scale which probably does not cut it.

• Hello, when I scan in a drawing with black lines and import the scan into photoshop I always get green and magenta casts outside the black line. Is there a good way to remove them?

  I used to remove them manually with a white Brush tool but I was hoping that there is a faster way. I enclose a screenshot! Thank you very much in advance!

  Hi danielavalentino,

  You can select the area using the Quick Selection tool and then use the paint bucket tool to fill with white color to this topic.

  Using Photoshop | Filling and selections of stroke, layers, and paths

  Hope that helps.

  Kind regards

  ~ Mohit