Slow connection USB HD with WRT610N

I have connected my router a FreeAgent Go 500 HD using the USB connection on the router.  The problem is that upload and download speed is very slow.  The average is 328 KB/s. They are a bit faster on my desk with a gigabit connection.  Should what settings I improve the speed of access to the hard drive?  (I have the latest firmware, and all other parameters are set to the default level).

I think you need to make changes on your wireless router, so improves the speed of download and shipping.

Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 leave name empty username & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the tab - Wireless

This settings are at 2.4 GHz.

-Here, select manual configuration... Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

-Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...
For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
Please note the 1 WEP key as it comes to the security key for the wireless network...

Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
Now see if you can locate your wireless network and attempt to connect, and after this try download and put online on your storage drive and check what speed you get it.

Ditto for your 5 GHz Wireless Network.

Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors.
Set the Radio band to wide - 40 MHz and change the wide to159 channel and channel of the standard to 161 - 5.805 GHz...

For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and do not forget the key.
NOTE: The password must be more than 8 characters...

Try and see how is the speed of data transfer.

Tags: Linksys Routers

Similar Questions

  • Connection USB Hub with Multiple Hard Drives Wi - Fi router

    I was shopping for a router wireless n. I liked this one because of the Gigabit and the usb socket: http://www.linksysbycisco.com/CA/en/products/WRT610N

    I was wondering if I could plug more than 1 hard drive into this USB port using a usb hub. I would like to use the router as a kind of SIN. I have a few drives hard usb and I would like to access it without having to be on all computers.

    Don't you think that the firmware on the router supports more than 1 hard drive? Has anyone tried this before? Can someone test it for me if you have the right hardware?

    Thanks for the help

    No, the Linksys WRT610N, you can use a single USB and hard drive... However on NAS200, you can use two USB and two hard drives.

  • Help! Unable to connect USB with the computer!

    Hey... I use bike g 2nd GEN recently, when the options of connectivity usb came... I have disabled by error two options... And now, when I connect my phone with cable USB WHAT DO not come connectivity options to the top! And only charges the phone!

    I also tried the check in the phone settings... But no use... Help, please!

    Go to settings > storage > tap the icon at the top right (3 vertical points) > Connect usb to the computer, you can select the USB options.

  • Communication of VISA with connected USB GSM modem using a protocol AT

    Hello, I am writing an application that should send sms messages.i have a connected USB GSM modem that supports the PROTOCOL. The modem works by using its own software and the HyperTerminal.I have used VISA driver development Wizard to create the .inf file. The device is now recognized and registered to the MAX. However, I can't understand how to code the commands and read the responses using write VISA and VISA read. Thanks for the help, Dima

    The last thing you should have to do is create an INF with the wizard. Remove completely and the compiled version. What you want to do is to use the inf file supplied with the device which a serial port to the BONE and makes it usable with Hyperterminal. It should appear in MAX as a serial port. Once you have restored all the way it is, then you can start with the examples of series and writing to it should work as it did in Hyperterminal. In other words, simply send the chain of command.

  • HP LaserJet P1102w: Windows 8.1 - run two different USB connected P1102w printers with simple shortcut on the desktop?

    I am trying to set up a single laptop Windows 8.1 for someone who uses it according to the seasons in two locations (FL and MY). I installed a HP LaserJet P1102w printer in each location. I wish I had a printer that is connected USB (one at a time will be connected) able to access in an only menu icon Office or file print command.

    When you add the second printer, Windows8.1 recocognized, the driver is already installed, he apparently recognizes the different addresses MAC and/or numbers of series of different printers and present second printer on the page devices and printers in Control Panel or allow a second printer on the desktop icon.  The only way to tell apart printers is that one is listed as a Hewlett-Packard LaserJet P1102w and the other is listed as a HP LaserJet P1102w. It is rather confusing to the elderly person who will be using the laptop.

    Is it possible to have the mobile exploit any printer is connected both by means of a simple print command or icon? Maybe by connecting via a WSD Port Monitor?

    Thanks for any help or advice!

    Dave Waters

    Hey @dmwaters138,

    Welcome to the Forums of HP Support!

    I understand that you do not want to have two HP LaserJet Pro P1102w printer operation via USB Wired on 1 single machine with a single order of printing or the icon. I would like to help you with the configuration of this option today. Because there are two distinct Laserjet on Windows 8.1 computer printers, to do two icons impression for various devices. The best way to tell the difference between the two devices is to rename printers. Thus, when the client goes in file and print in the print dialog window, simply choose the printer name that corresponds with the device they want to print to. You can rename printers all you want. Install printers on the WSD Port wireless network would give the same result of having two copies of the printer is installed on the computer. One thing I see, is that the name of the HP Laserjet Printer is unusual. It seems that your printers may be using the built in Windows drivers, rather than the HP Full Feature driver package for the device. This may cause printing conflicts in the future. Can I please you follow the steps below to set up and install both LaserJet HP correctly.

    Step 1: Remove the drivers:

    It is crucial that your HP LaserJet are using the correct HP driver package. So I'll have you remove two copies of your HP Laserjet of the computer. Please make sure that the USB cables are connected.

    1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
    2. In the start screen, type devices and printers. Click on devices and printers
    3. In devices and Printers window please right click on the Hewlett-Packard Laserjet and select delete device or delete. Once this copy is a party, please right click on the HP Laserjet P1102w and select 'remove device' for this one as well. After have removed two copies of the Laserjet please close devices and printers.
    4. Then, on the Start screen type programs and features. Click on programs and features to launch the window
    5. Scroll the list of programs and find the HP Laserjet driver package. If you see the HP Laserjet printers select Uninstall. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

    Step 2: Remove temporary files:

    1. Open the screen, Start by selecting the Windows icon at the bottom left of the computer screen or by selecting the Windows key bottom left of the keyboard, to the right of the Ctrl key
    2. In the start screen, type run. Click on Run to launch the run dialogue box
    3. In the run box, type %temp% , and then click OK
    4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
    5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
    6. Close the Temp folder when it is empty
    7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

    Step 3: Install devices:

    1. Please leave unplugged USB cables

    2. Please click here to download the package full feature software and driver for the HP Laserjet Printer

    3. when the download is complete, please follow the instructions on the screen to install the first Laserjet. Make sure you select the 'install the printer software ' tab connect the USB cable only when the installation window prompts to.

    4. Once installation is complete for the first printer, please open the Start screen and type devices and printers.

    5. once the devices and printers opens, you will see the first copy you installed HP Laserjet. Please right click on the HP Laserjet Printer , and then select printer properties

    6. under printer properties , you will see the name of the printer on the general tab at the top. Please rename the printer to something that the customer acknowledges that this first printer. Then click on apply and then OK to save the changes.

    7. close devices and printers

    8 open the Start screen again. This time, type run. Click on Run to launch the run dialogue box.

    9. in the run box type %temp% , and then click OK. The Temp folder is now open

    10. in the Temp folder to locate the 7z... file. Click this folder to open it. This is the HP Installer package for HP Laserjet printers. Scroll to the bottom of this file and double left click on the P1100_P1560_P1600.exe driver package. The installation program will now open.

    11. in the title of the installation window, select "Add another printer. Don't connect not the USB at the moment. Click Next.

    12 connect the USB cable for the second printer once the installation window invites you to. After the second installation, please open the Start screen.

    13. in the start screen, type devices and printers. Click on devices and printers to open the window.

    14. in the printers and devices window, you will now see a second copy of your HP Laserjet. Right-click on the new copy and left click on properties of the printer. When the Properties window opens please rename the second copy of your printer. Click on apply then OK to save the changes.

    15. close devices and printers

    When the customer print, in the print dialog window they will just now to choose the name of the printer that fits the HP Laserjet Printer they wish to print to.

    I know that sounds like a lot of steps, but I wanted to give you as much detail as possible to ensure that this process goes well for you.

    Please let me know if the steps I have provided to resolve your problem. Good luck!

  • Preloading of race condition critical with slow connections

    Hello

    I have an Adobe Edge publication with a good amount of animation - the compressed file * _edge.js is 75 KB compressed or uncompressed 675kb.

    If I load the index.html file published by default with a cache of cold on a slow connection (~ 80 Kbps) I invariably get a two fatal errors thrown.  Load up in a more quick and everything works fine.

    Here is a dump of the errorsm including the stack trace:

    Eception ReferenceError: jQuery is not defined characters_edgeActions.js:52

    (anonymous function) characters_edgeActions.js:52

    Eception TypeError: Object # < object > has no method 'okToLaunchComposition' characters_edgePreload.js:27

    edgeCallback characters_edgePreload.js:27

      1. (anonymous function) characters_edgePreload.js:15
      2. tcharacters_edgePreload.js:11
      3. dcharacters_edgePreload.js:10
      4. I.b.onreadystatechange.b.OnLoad

    As you can see, edgeActions is called before the end of the loading, which is obviously a problem with preloading of jQuery code.  Also the file _edgePreload is trying to complete before he loaded the file real edge.1.5.0.min.js.

    This is the network of Chrome Panel (sorry, that I shared the images so they don't end up too small)

    adobe-edge-network-panel-1.pngadobe-edge-network-panel-2.png

    I'll be looking in this new, but thought I would make it with you.

    Thank you very much

    Pete

    OK, so I at least had the thing of loading and execution.

    1. I edited the html file by adding
  • HP ENVY 7640e: can I connect the printer with a USB cable in addition to the Wi - Fi

    I just bought this printer and succeeded in setting up wireless.  Can I now connect it using a USB cable?  If the answer is 'YES', just make the USB connection, i.e. will be 10 Windows automatically adds the printer, or do I have to re - run the setup software and select the USB option?

    I would like to have the possibility of having the two configurations available for me to pick, i.e. be able to select the wireless printer or USB printers.

    Thank you.

    Hello

    The answer is Yes, you can connect USB and wireless. 10 Windows can install a generic driver for you to print but envy 7640 has many features, so you must install drivers to allow you to print and scan locally using USB and printer software.

    You need to connect to wireless internet to be able to use its full functionality.

    Kind regards.

  • error code 43 usb not recognized when connecting usb (sd card) with asus X55C laptop.

    Hi, I'm 43 error code while the plugin my usb card with asus computer laptop X55C. I tried several methods indicated on the window on the error code 43 site but I have not any solution even took me out of my laptop battery usb recognize, but it did not work. I uninstalled the Device Manager usb driver, but it also does not work please help me.

    Hi Daman,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You made any hardware or software changes on your computer before the show?

    Thank you for details on the question and your efforts to resolve.

    This problem can occur is because of corrupted USB drivers or incorrect settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run this Microsoft fixit and check.
    Reference:
    Hardware devices do not work or are not detected in Windows
    https://support.Microsoft.com/en-us/mats/hardware_device_problems

    If this does not help, use method 2.

    Method 2:
    Download and update the chipset and drivers USB of your computer from these links and check the issue.

    Driver Chipset
    http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=23&F_NAME=Chipset_Intel_Win7_64_Z9301020.zip#Chipset_Intel_Win7_64_Z9301020.zip

    USB driver
    http://support.ASUS.com/download.aspx?SLanguage=en&p=3&s=117&m=X55C&OS=30&ft=22&F_NAME=USB3_Intel_Win7_64_Z103214.zip#USB3_Intel_Win7_64_Z103214.zip

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Cluster AP541N of problems with the sticky homelessness and slow connections

    I have a client with about 20 users with wireless and a cluster of 4 AP541N on their activities. They have an app that they get on a cloud that connects to a remote desktop in the same sense that Citrix. We have a problem of connectivity to the wireless network and also some speed issues. I went when they have problems and tracked down the AP where is the MAC machine and often it is not the closest access point to the user. Many times, it is an access point with 2 other AP in the same cluster between him and the client computer.

    Concern for speed appears on different machines, not necessarily the same as those with sticky homelessness issue. Some of them have a wireless n card, but are only connect to g. I don't know if it's related to that, but I also have machines 100% or close to it, the signal strength and they dive into the region of 15Mbps. The LAN is fine, other wireless devices are fine, but these intermittent problems happen to some users. We have updated the firmware for the wireless card, and generally, this does not resolve the issue.

    The cluster uses automatic management of channel and in order to cut down on the thorny issue of roaming my network engineer value emission high instead of full power to limit overlap.

    Any suggestions about where to go next with troubleshooting? These users entered a wireless network that was not clustered with retail store bought routers Cisco wireless and had similar or better performance, so they ask why they're not getting a better experience with the equipment upgraded. Thank you all

    My name is Eric Moyers. I am an engineer in the Small Business Support Center.

    I'm sorry to hear that you are experiencing this issue.

    The AP541N does not support roaming. Yes, I know that in the Administrator's Guide, he mentions one seamless experience. It is actually mentioned in the WDS section and not Clustering. However is not roaming as you would find with a wireless network with a wireless LAN controller.

    Within the Cisco Small Business equipment and any other provider, for networks that do not have a controller wireless LAN to a wireless client to move from one access point to another that the first signal would actually have to drop to get the next strongest signal to authenticate and connect.

    With the AP541N, there is an option to activate prior authentication if you use Radius Authentication. This assistance in faster authentication but is still not roaming and would require a signal switch to the next strongest signal.

    Have you done a scan wireless in your area? I use a tool called Analytics of a Wi - Fi connection, the best thing is it of free. This can help determine which static channel is best for your environment. One of the Con to use an automatic channel is that when the AP is changing channels, it will pass some clients are currently connected and won't allow all connections until a new string is found and the beginning of the device transmitting again.

    If you want help to determine the best configuration for your situation, lease call our support center and prosecute so that one of our engineers can work directly with you. Once you have a file number, all engineers know who I am and can reach assistance me if needed.

    Eric Moyers
    .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
    Wireless and monitoring subject matter Expert

    Please note the useful messages and let know when your question has been answered.

  • Smartphones blackBerry 9360 connects USB

    My girls used to connect USB phone and you could see his phone from the computer (iMac, Windows). Now, when she chooses USB he doesn't ask password and connects only to load as if she chose Charge Only.

    I don't think it's the computer, the same effect on our iMac and 2 Windows computers. Is there a setting on his phone that needs to be changed, or a updated software (it seems to be completely up to date)

    This problem started occurring a couple of weeks.

    Hello and welcome to the community!

    It is possible that the mass storage Mode was cut on the BB, which would translate as you indicate. Check here:

    • KB13564 How to enable or disable the mode on the smartphone BlackBerry mass storage.

    Otherwise, each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    Good luck and let us know!

  • Strange behavior AT200 - 101 USB OTG with all devices

    Hey,.
    I have an AT200-101 with an ICS 4.0 OS update and I can't get the USB hostmode working. After a lot of reading on the difference fine between the regualar (type B) USB connector and type A (called the OTG) I finally got the right adapter (it has a shape of recangular and ID - PIN is connected to the Earth).
    Now, whenever I plug in a device (massstorage key USB 3G modem) nothing happens except the watch AT200 suddenly * load * even if it is not connected to the charger or the externally connected device power is on.
    I tried these external USB devices with an other ICS Tablet (Zenithink) and they work fine.

    Andybody of the clues?

    Did some tests more: connect a USB mouse works fine as well plug my Sony NEX camera in mode masstorage... But all the other sticks are ignored... Only Toshiba sticks are recognized?

  • Problem of the El Capitan 10.11.4 and prompt orders/confirmation of the very slow connection wifi

    After that update to "El Capitan 10.11.4" my macbook pro is not able to connect to wifi public networks that invites for an acknowledgement of receipt/confirmation to the user.

    The login is also unbearably slow (about 5 minutes), but luckily, everything seems to work once connected. It seems that the wifi problem is related to the slow connection in what I saw the google wifi guest come up starbucks and disappear during the process of connection of five minutes of time (reboot wifi has not triggered the prompt after compulsive attempts).

    I read topics similar and tried the option presented by robertk1 in difficulty to El Capitan stuck during the connection , but still the same problem. I tried the signed two disconnected (e) icloud and make sure that there is no startup slow process daemon/agent.

    Here's my laptop specs: MacBook Pro (15-inch, mid-2014, retina), 2.8 GHz Intel Core i7, 16 GB 1600 MHz DDR3, Iris of Intel Pro.

    I am considering re-installing and getting ready for a backup. I am wondering anyone has recommendations about what else I can try as a last resort. It seems there should be a way to repair this.
    Below are some of the log entries which seem relevant for the processes taking the longest time.
    Thank you for any help, insight and tips,
    Enrique

    Here are the ongoing entries from 09:35-09:40... There is more input before connecting, but they seem irrelevant.

    22/03/16 9:35:40.103 PM UserEventAgent [270]: name of the event for flow/token could not do: com.apple.xpc.activity/24: 132: outdated data request

    22/03/16 9:35:40.183 PM cloudphotosd [295]: determine the start of the transition service: service = personId = com.apple.photo.icloud.cloudphoto * lastKnownPersonId = (null) targetState = 0

    22/03/16 9:35:40.183 PM cloudphotosd [295]: determine service transition end: currentState 2: 3, shouldEnableService: 0

    22/03/16 com.apple.photomoments [354 9:35:40.189 PM]: GEO: recovered Server geo rev version version configuration file: 9

    22/03/16 9:35:41.108 PM DCs [284]: error in __SOSUpdateKeyInterest_block_invoke_2 get the interests of the ring (null)

    22/03/16 9:35:41.121 PM CloudKeychainProxy [357]: __45-[UbiqitousKVSProxy doEnsurePeerRegistration] _block_invoke < UB - e - C > ensurePeerRegistration called, success ((null))

    22/03/16 9:35:41.124 PM DCs [284]: securityd_xpc_dictionary_handler IDSKeychainSynci [356] SetDeviceID error Domain = com.apple.security.sos.error Code = 1032 'no equal for me' UserInfo = {NSDescription = no equal for me}

    22/03/16 9:35:41.125 PM DCs [284]: securityd_xpc_dictionary_handler IDSKeychainSynci [356] SetDeviceID error Domain = com.apple.security.sos.error Code = 1032 'no equal for me' UserInfo = {NSDescription = no equal for me}

    22/03/16 9:35:42.943 PM configd [60]: network modified

    22/03/16 9:36:06.711 PM cfprefsd [146]: BUG in libdispatch: 15E65 - 1718 - 0x0

    22/03/16 9:36:08.832 lsd [276] PM: LaunchServices: currently 0 installed placeholders:)

    )

    22/03/16 9:36:37.584 PM logind [103]:-[SessionManager getClient:withRole:inAuditSession:]: 241: ERROR: no dictionary of session for the audit session 100018

    22/03/16 9:36:37.584 PM logind [103]: _SMGetSessionAgent:73: ERROR: failure of __SMGetClientForAuditSessionAgent 2

    22/03/16 9:36:37.584 PM IMRemoteURLConnectionAgent [363]: SACShieldWindowShowing:925: ERROR: NULL response

    22/03/16 9:37:08.528 PM apsd [84]: attempt to push wake subjects without dark wake active:)

    22/03/16 9:37:08.530 PM apsd [84]: attempt to push wake subjects without dark wake active:)

    22/03/16 9:37:08.531 PM apsd [84]: attempt to push wake subjects without dark wake active:)

    22/03/16 9:37:08.533 PM apsd [84]: attempt to push wake subjects without dark wake active:)

    22/03/16 9:37:08.546 PM apsd [84]: attempt to push wake subjects without dark wake active:)

    22/03/16 9:37:08.546 PM mapspushd [365]: [warning] Services all gone, delete all accounts

    22/03/16 9:37:08.547 PM mapspushd [365]: [warning] Services all disappeared, removing all activated accounts

    22/03/16 9:37:08.547 PM mapspushd [365]: [warning] Services all disappeared, removing all dependent features

    22/03/16 9:37:08.561 PM askpermissiond [369]: StoreTransport: reset connection by using production environment name APS

    22/03/16 9:37:25.346 PM corecaptured [208]: CCProfileMonitor::freeResources done

    22/03/16 9:37:25.346 PM corecaptured [208]: XPC error: invalid connection

    22/03/16 9:37:25.346 PM corecaptured [208]: CCDataTap::profileRemoved, owner: com.apple.iokit.IO80211Family, name: AssociationEventHistory

    22/03/16 9:37:25.347 PM corecaptured [208]: CCLogTap::profileRemoved, owner: com.apple.iokit.IO80211Family, name: OneStats

    22/03/16 9:37:25.348 PM corecaptured [208]: CCLogTap::profileRemoved, owner: com.apple.iokit.IO80211Family, name: IO80211AWDLPeerManager

    22/03/16 9:37:25.349 PM corecaptured [208]: CCLogTap::profileRemoved, owner: com.apple.driver.AirPort.Brcm4360.0, name: DriverLogs

    22/03/16 9:37:25.349 PM corecaptured [208]: CCDataTap::profileRemoved, owner: com.apple.driver.AirPort.Brcm4360.0, name: StateSnapshots

    22/03/16 9:40:49.934 PM loginwindow [102]: ERROR | -[ApplicationManager handleCASEvent:withData:] | SetupAssistantSpringboard exit by user zero stateful session: 171, continuing connection

    22/03/16 9:40:49.934 PM loginwindow [102]: ERROR | -[LoginTransition setDarkInstallShieldEnabled:] | Attempt to shoot dark install shield when he was not a

    22/03/16 9:40:50.045 PM WindowServer [178]: * DMPROXY * (2) found "/ System/Library/CoreServices/DMProxy. Run with arg = - login

    22/03/16 9:40:50.050 PM WindowServer [178]: * DMPROXY * (2) found "/ System/Library/CoreServices/DMProxy. Run with arg = - AMBDprefs

    Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  • IBM travelstar external USB compatibility with Portege 3480CT

    Hello
    I try to use an IBM & reg travelstar in a box external usb with my Portege 3480CT running Windows 2000 (with sp4). While the disc is recognized as plug-and-play on other computers running win2k and winXP, is not recognized on my Portege, which gives an error message suggests that the drivers are missing.

    According to IBM/hitachi (which make the player), no drivers are needed and the drive should work as plug-and-play, recognized as a generic USB HDD. This happens all other computers I've tried.

    Are their compatibility problems with this drive? Or are their special all the drivers necessary to recognize this configuration on the Portege?
    Thank you
    B

    Hello

    AFAIK there is no driver required for external hard drives and they are recognized as plug-and-play. Your Portege is an old unit and there may be a problem with the USB ports. Have you checked the other USB devices?

    It is also possible that there is not enough power, and in this case, it is recommended to connect the drive using USB hub with own power supply.

    Good bye

  • Info volume cRIO 9030 to connected USB drive

    I want to display the available disk space for a USB stick plugged into a cRIO-9030 running Linux Realtime (path to the drive is/u).  It is a data logging application that can run for a month with users looking only to see that things are run OK, which they won't if disk space wears.  I tried to get information of Volume and the file Info screws, but both give me nonsense values.  It seems that the Volume of information VI get always reports on the internal disk (/ C) any way I use, I can't see how much space I have on the drive/u.  I plugged into different USB drives with different capacities and free amount, but I still get the same values of the VI, which differ from what MAX brings to the reader/c, but are the closest values for this player than anything else.  I also get a useless value of the VI of information from file/Direcory, which seems to be pointing out how many files is at the root of the drive, not its quality or its free space.  Any suggestions about how to get free space and capacity of a USB key connected to the cRIO?

    bjlv

    Odd. I just tried this on my own target RT Linux (running LVRT 2014) and it seems to work as you expect, where to get the Volume information on ' / u ' returns the available space on the Flash DRIVE and is certainly different from what I get from the internal drive. I see a bug (?) where there's just ' / ' was not taken in charge, what should be on Linux:

    / (or/u) u is actually a symbolic link to where the drive is actually mounted as/media/sda1 or/media/sdc1. (/ u is provided as a convenience of compatibility for porting the applications of Phar Lap or VxWorks.) You get the same result using the actual mounting location? You have access to a shell to the target? If so, that shows "df"?

  • How can I get the USB-Quad08 with Dasylab encoder channel data

    Hello

    I'm reading the pulse signal of USB-Quad08 with Dasylab V10, but every time I got the error message "this Committee has no meter 9513.

    I have configured the jury with Instacal and the test hardware is ok. I used the module 'Entry meter' (Modules--> inputs / outputs--> MCC - DAQ--> Counter Input) to read the signal of the channel meter. "Entry 9513 counter" displayed and I na not change settings. After connecting a graphic recorder module I run the application. The error message appeared.

    I noticed that USB-Quad08 Council has counter 9513. But why the error occurs?  How can I get his channel encoder signal?

    PS. I can get with Dasylab DIO signals, but I can't any signal with TracerDAQ, even I can't find USB-Quad08 in his list of DAQ devices.

    Please contact Measurement Computing.

Maybe you are looking for