Similar Questions

• WRT54G2 slows down the internet connection

  Hello.

  Somehow, my WRT54G2 router slows down my internet connection. My PC is connected by cable and I cannot watch youtube videos and gave to wait fo 20 seconds for gmail to load up. If I connect the PC to the modem directly then everything works fine. Reset to the default router configuration solves the problem for a few weeks, but this solution is quite annoying. Is there another way to solve this problem once and for all?

  Thnx.

  In the latest version of firmware notes, it is written:

  -updated with the patch to solve the problems of ping

  I'll try to update my routers firmware now, if this will fix my problem, I probably won't respond to this thread more.

  Router support page:

  http://homesupport.Cisco.com/en-us/wireless/LBC/WRT54G2

  Firmware release notes:

  http://homedownloads.Cisco.com/downloads/WRT54G2V1.5_1.5.01.013_FwReleaseNotes.txt

• Slow down the internet using Toshiba LX830-107 running Win7

  HY

  I have a problem of speed limit on my Toshiba LX830-107 all-in-one with Win7 Pro 32-bit. Web from Toshiba support site, I can't find a driver for Win7 Pro 32 bit lan. I installed the driver lan for 32-bit Win8 without error, but with this speed to 9 mb instead of 94 MB limit as it is on other computers on the network. Also, I noticed that my network card does not work as a gigabit card as it is. How can I solve this problem? because I need to use Win7 32-bit due to a compatibility problem with some applications installed on my device.

  Kind regards

  According to the specifications of computer map, the device supports the Atheros (Atheros AR8161/8162) LAN card 1000BASE-T/100Base-TX/10Base-T

  As far as I know, you can change some options LAN in the BIOS.
  Check if you can switch between 1000/100/10

  You can also check the properties of the LAN (the - LAN card - Manager device properties) card
  Here you will find further options in the "Advanced" tab

• Why FFx21, from the opening, thus creating three CACHE of INTERNET files duplicate (01, 02, 03 & tot'ng 12 MB) slows down the site?

  On the 'OPENING' Firefox for the web, there is an initial use of 12 + MB of use via INTERNET CACHE files. These files show up, when using CCleaner, as... \_CACHE_001, 002, 003 each with a size of say 4 096 Ko. The browser seems to "lag" - particularly visible when I type in one of the available search bars... I tap and then wait for the letter or the word to display. In addition, Firefox crashed several times since the upgrade to the latest version (ffox 21). I have two images CCleaner printscreen to show files so useful, but not sure how to enter them here.

  Hello, these are the files where firefox stores its cache - you won't need CCleaner (in fact, it will be only slow down the things that you have already noticed, given that these files must be recreated after the next startup of the browser), you can also clear the cache with the mechanism built into firefox: How to clear the cache of Firefox

• Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  

  I did it with a 32GB SDHC UHS - I Transcend

  

  I do not recommend under OS X from such media, but it works very well. I was preparing for my review of the CPHA Yosemite and did not want to mess with the internal drive of OS X.

• Why adobe flash player slows down the performance of the browser all?

  I rememeber more there are problems with the plugin flash player in Mozilla's Firefox browser, causing the plugin to crash: Adobe Flash plugin has crashed - prevent it from happening again. Firefox help

  After a recent update (17,0,0,134) he almost never crash, but it slows down all browsers performance until she finally released the following video. The majority of all the news sites use flash player

  to launch its "commercial. And there are several boxes with advertisements, for example: www.lrytas.lt

  And while I'm listening to music via youtube and on the other tab reading news on this site, when the music clip ends and the browser begins to load another clip of music,.

  then the job of the Navigator everything is paralyzed - I can not write a text, can't scroll down, do not click on a link. This is because the system is busy while loading YouTube next clip.

  Mouse marker becomes in a circle around rotation indicating the loading procedure (firefox does not). And it takes time - up to 10-15 seconds to launch the new video. Then sudenly my actions is executed after such a break - my text is typed.

  My scroll down and maybe link is pressed. All this procedure slowdown is annoying. It wastes a lot of time. I opened the Task Manager and I see that Firefox takes 900,000 or 1300.000 K memory. My OS is Windows 7.

  I close the process firefox.exe together and then it automatically closes the plugins. Then I open the browser again and he ask to retrieve automatically suspended sites, I agree with her and then she just opens again. And once again

  He works constantly for some time until it slows down the browser again. With several tabs more problems. In addition, the display of a video sometimes too late too. Some images are lost, as the system is already too late because

  loading procedure takes too many resources.

  A long time ago long flash player was better. But today, with increased again * substandard computers like iphones iPad you need to evolve the player such that he must play throughout, but its performance on different platforms

  This is not the same.

  Who is guilty - my PC, Firefox or the plugin? Or maybe that I am?

  In my view of cold, users actions cannot be ignored. Preference should be the user continuous control on a system load.

  From now on, everything works fine. No complains. I mean without everything turning off hardware acceleration. It's after a few windows or update firefox.

• Performance - remove igdkmd64.sys monitor - its by slowing down the boot process

  Hello

  I am running windows 7 Home premium SP1 64-bit and the monitor above suggests that I try to delete the driver above because it slows down the startup / boot process

  Can someone please suggest easy steps to remove the same and if there are implications for the removal of the driver

  Hello

  What is there to process you followed to remove it... It's actually not a bad file... Its graphic driver Intel. Igdkmd64 sys is the Intel Graphics Kernel Mode Driver for Microsoft Windows 8, Windows 7, Windows Vista, and Windows XP 64 - bit operating systems.

  the igdkmd64.sys file could be the driver Intel Graphics. Have you tried to download the drivers directly from the Intel web site? If this is not the case, try using this link:

  http://www.Intel.com/p/en_US/support/detect

• How do I disable Adobe Flash - too many sites have Flash ads that slow down the browser unless an analysis.

  Some pages contain 3, 4, 5 or more adobe flash ads running at the same time, which slows down the browser a lot. Then, if you happen to have several tabs open, the browser is dragging virtually interrupted and many times is not responding at all.

  I would like to be able to choose whether or not a page can run flash content - not it be something that works all the time for each page, with the only option being to kill the plugincontainer process in taskmanager - who kills even the Adobe Flash elements you can watch; like a youtube video.

  Why is there not a way to disable Adobe Flash in the browser? I have updated Firefox and Adobe Flash, but nowhere is there at - it an option to turn on or off according to your needs.

  A control can be added to the Internet Options that you can set to have a page request before it is allowed to run the Flash content? Having that kind of control would GREATLY increase the pleasure of sailing on several pages.

  Any information on how to do it, would be appreciated.

  Hello, this is already possible in firefox: go to firefox/tools > addons > plugins and shockwave flash to Activategame. then the plugin will be disabled by default but can be enabled on a site-by-site basis.

• Flex 2 network slows down the entire network

  I bought a Flex 2 a few weeks ago. Installed the software Office 365 and creative cloud by Adobe. Everything worked well on both networks, I connect to.

  Today, performance on the entire network is now gone to the dogs. At first, I suspected the provider or router so crossed all the routines of standard service (this disconnect, which reboot) again and again. Same face, deadly slow performance of several PC and Mac on the network.

  Then, I hit on the idea to close my Lenovo. Suddenly, network download speed of 2 MB/s and the ping from 2000 MS to more normal speeds returned.

  I restarted the Lenovo a couple of times, from 2, 4 GHz to 5 with the same result.

  At some point when I plugged the Lenovo directly into the modem (part of the diagnosis) direct speed seemed faster.

  Because the router works perfectly with all the other machines and I haven't changed a thing on it, and because the symptoms get carried away on the network when the Lenovo is cut, I can only assume that there is something to do with the Lenovo Flex 2 and how it communicates with the rest of the network.

  I should also add that I tried to plug an ethernet cable to make sure that it wasn't just a wireless thing. Still had the slow performance.

  I'm pulling my hair out over this, if I can't fix it, I can't work (no one in my office will be able to work) and will have to return the machine...

  Any ideas?

  Thank you...

  Thanks for the reply.

  After much pulling hair and analysis where the traffic was, it turns out it was a Microsoft cloud service a too aggressive drive that decided to download dozens of large files at the same time instead of in series. This excessive series of connections slowed down the rate of time and transfer of ping everything on the network. Disable updates for OneDrive during periods of work seems to have solved the problem.

  That said, working on this, I see that updates from Lenovo is continually a significant overhead. Do not understand why it takes so resources...

  Thanks again for the response...

• Prevent the Beep.vi slow down the VI

  Hello

  I'm working on a metronome that should run for a period of x with a frequency of x. The time is in seconds and rate.

  Whenever there is the beet, the VI must make a beep. This can be done easily by the beep.vi, but the standard for the beep.vi is to play one system.

  This is a fairly long tone (10 of Windows). And so, I want to put my own frequency and duration of the beep.

  But when I change this in the beep.vi, the VI will wait for the set time (msec) before it continues the vi. If it slows down the whole VI.

  Is there a way to make the beep.vi a sound signal with frequency and duration that I put, without that it slows down the VI?

  Thank you!

  Have the code "beep" performed asynchronously to your hand VI: have the VI in another loop and use a queue / notifier to notify the loop when playing the main loop.

• My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files

  My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files.

  Hello

  1 are. what type of files?
  2. when they are stored?

  3. What is the size of these compressed files?

  Try to perform the clean boot on the computer and check if that helps.

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  See the bottom of the articles that might help you resolve this problem.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Lumetri slows down the encoding of color correction more "obsolete."

  Based on my own informal tests, I notice that Lumetri effects on an element in a sequence slows down the process of encoding significantly compared to the same general objective realized with effects of correction of the so-called color "obsolete". Other messages on the forum seem to confirm this.

  I guess the older "out-of-date" color correction effects are far from obsolete. Looks more Adobe innovates and push this crowd of material premium to their last, Lumetri, but that the older effects are more obsolete than obsolete, probably to be there for a long time... iow, use them as you wish for you will hit all compat issues in the foreseeable future.

  Is that what that sounds right?

  My goal by asking is to better align myself as a user of first... my tendency is to take the final product as user recommendations, but that can be a trap when it is really a big innovative push who sometimes material/performance hits that make it unrealistic for all users.

  I have a portable old 5 year, the Sony Vaio VPCF215FX w/6 GB RAM, NVIDIA GeForce GT 540 M, 1 TB SSD.  I am able to do, but I really need to think intelligently avoiding external USB drives, using smart rendering, etc. When I tried an experiment with older color effects, I saw a significant reduction in the encoding time (General of my test described below). For this reason, I'm stepping back and thinking that the push 'use Lumetri' everything is beautiful for those who really need, want, and also have the material that can reasonably be taken in charge, but maybe not for someone like me, at least if I can avoid using older effects and with all the same. I just can't justify Lumetri in some cases where it slows down encoding medium.

  It is not that my hw is unable to use it but when I can use older effects and get a nice discount time coding for my not pro use, seems useful to avoid the Lumetri currently, until the upgrade hw or something. I wanted to just check-in here on the forum because everything above is me in a vacuum, I felt ready to hear some voices from the community on my point of view.

  Oh, my test...

  Create two sequences, each with the same single element from the same ~ 60 second clip of Canon EOS 70 d (ALL-I, 1920 x 1080, 23.976 FPS, MPEG-4 AVC / H.264, VBR in.) Container MOV), where each sequence has the following effects of color...

  Seq1-UsingLumetri uses the following color effects:

  • Lumetri #1 (primary): globally adjust contrast/tone/WB Correction of basic and secondary HSL to affect parts of the installation image.
  • Lumetri #2 (secondary): none other than the Secondary to affect an object moving on tracks with a circular mask.

  Seq2-NonLumetri uses the following color effects:

  • The fast color corrector: adjust overall contrast/tone/WB (identical to what Lumetri No. 1 above is without its Secondary).
  • #1 RGB color corrector: Color Correction secondary only to affect certain parts of the image (the highest Lumetri #1 only secondary HSL what).
  • #2 RGB color corrector: secondary color Correction only affect an object moving on tracks with a circular mask (what does the #2 above Lumetri).

  I coded then everyone if above with such parameters as input media, none made smart (because I want to see encoding time with effects) and out of type, etc. The result was that Seq1-Lumetri took about 225 seconds, while Seq2-NonLumetri took about 150 seconds, about 50% more time when using Lumetri on the same ~ 60 second clip entry.

  Note, part of the reason why I'm here is to ask my question above one, sort of general/summary, but it is also based on my not not having seen a single Lumetri color correction tutorial that describes these nuances... check in shades that seem to be essential for efficient use of the product by someone like me. I want to know about Lumetri, that's fine, but I also really want to know how to use the product together more effectively... to do this, seems to me, should not take account of the effects of color more older 'obsolete '. I want to at least know if there is agreement, or if I could be missing something here.

  Thank you!

  "Legacy" color tools more elderly are simpler "peripheral" in the code if I understand and don't work... especially... but as has been clearly established by colorists, especially if you do anything with the "" range"in the young or 3-way controls, you can get weird and very... results not correct not...

  That said, if you stick to their tools without using the modifiers of the range and not to push things too far, they work for the most part, kind of like what you would expect.

  Thus, on this laptop old of yours, stick to the Legacy tools is probably a good thing. And works very well for you. If you move up to a more recent material, you probably want to look more like the Lumetri Panel.

  Currently, I am working with the help of a mixture of Lumetri for the 'main' ranking, but using 3-way & RGB secondary additional & such.

  Neil

• Slow down the automatic transition

  Hello!

  I'm working on an introductory presentation with automatic switching between slides. I want to slow down the presentation (I tried to put a 15 seconds delay) but it keeps on changing every second...

  Can someone help me?

  (I must say that my speech is in french... so I hope I used the right conditions...!)

  The procedure is:

  Select all of the slides in the Panel of the browser (click on a slide and then use: control)

  Inspector > Animation > add an effect of > select the effect in the list

  on the start menu, transition drop-down list box select automatically

  change the time of 15 seconds (double-click the entry, type in 15 and then on enter)

  This not work?

• Slow down the Audio and keep beat related Sections

  Hello people,

  I have a song that I would like to remix and I all set beat matching.  When I go to slow down the audio I lose my bearings.  Is there anyway that I can keep the sections that I beat matched and slow down the audio so these sections remain?

  For example, that the song is 120bpm and I have this rhythm corresponded perfectly.  If I have a loop of 4 bars and slow down the audio I have more 4 perfect bars.  I want to be able to slow down the audio and still have my bars 4 faultless.

  I hope that makes sense.

  Logic Pro X: using Varispeed to change speed

• Slow down the speed of FAR FAR AWAY in iMovie 10.1

  In iMovie 10.1 FAR FAR AWAY effect scrolls too fast and I don't think I should buy a market after effect fix a bug. How can I slow down the speed of the text please?  Roll the credits cost $20 and it will not work with updates so it is not an option, in addition to its construction in already, it is adjustable and now is not!  HELP PLEASE

  See that work around posted by Vanessa D 19 dec in this link

  Slow down the title Far Far Away in iMovie 10.1?

  I don't use version 10 so can't comment, but the link it seems to work.