Slow file - still not resolved

Similar Questions

• On laptop CD/DVD drive is not recognized/is missing. Having read the other topics, problem still not solved.

  I'm on a computer laptop gateway and my cd player does not work all of a sudden. I can eject and put CD in there and it will hum for awhile, but nothing will happen. I went to Device Manager and it is not yet listed. I read the other topics and the problem is still not resolved, please help. Also, my HKEY_LOCAL_MACHINE folder has not all folders in there, so I can't go to system/etc to delete anything because there is nothing to remove. Thank you for your time

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers to check with the system manufacturer to see if there is a firmware or drivers for your if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted

  Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted.

  I have also changed the CLASSID HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {BDEADE7F-C265-11D0-BCED-00A0C90AB50F} / instance DontRefresh value to 0

  Hello

  (1) have you made changes before the start of this issue?

  (2) what happens when you try to start in safe mode?

  To start your computer in safe mode, you can see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  I suggest you to place the computer in a clean boot state and check if the problem is resolved:

  1. sign the computer by using an account with administrator rights.

  2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  3. on the general tab, click Selective startup, and then click on to clear the load startup items check box. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  5. click OKand then click restart.

  6. check if you still have the problem.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual after you have finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start , type msconfig.exe in the Start Search box and press ENTER.

  1. If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart.

  If this does not work, try to run a SFC scan. To do a SFC scan follow the steps below:

  Use the System File Checker tool, which is also called scan SFC.

  File system (CFS) auditor verifies that all Vista system files are where they should be as they are by default and not corrupted, changed or damaged.

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select Run as Administrator.

  2. click on continue or provide administrator credentials if prompted.

  3. in the command prompt window , type the following, and then press ENTER:

  sfc/scannow

  4. you should see messages on the screen the following:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  5. once scanning is complete, check to see if the problem you are experiencing is resolved or not.

  Hope the helps of information.

• I am currently using CS 5.5 on an iMac. My recent .mts files do not play sound. I found a forum on the issue. One of the solutions is to uninstall CS, following cleaning, and then reinstall CS. I'm still able to reinstall CS 5.5 or is it not more

  I am currently using CS 5.5 on an iMac. My recent .mts files do not play sound. I found a forum on the issue. One of the solutions is to uninstall CS, following cleaning, and then reinstall CS. I'm still able to reinstall CS 5.5 or it is no longer supported?

  Hi ozziethedog,

  Creative suite Adobe CS 5.5 is a former software and the operating system you are using is the most recent, so there may be compatibility issues that adobe has not tested these applications on newer operating systems.

  However, you can download & install the configuration for Adobe creative suite CS 5.5 from the following link:

  Download Adobe Creative Suite 5.5 products

• I just got my DVD for Lightroom 6 and it will not install and ReadMe directions do not resolve the issue or is not available.  There is no .exe file I can find on the disk.  What should I do?

  I just got my DVD for Lightroom 6 and it will not install and ReadMe directions do not resolve the issue or is not available.  There is no .exe file I can find on the disk.  What should I do?

  Try it please link below:

  Download Photoshop Lightroom

  I hope this helps.

  Greetings

  Megha Rawat

• Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  Cannot open a pdf file from the website of immigration canada. Gets a message - you need a later version of the same player after update still not working

  10 Windows Internet Explorer with the Acrobat Reader plugin is available.

• Trying to fix a CID parent access to a file descriptor of delta but VM still does not start. Other error "cannot open the disk...". The specified file is not a virtual disk.

  Starting the virtual machine has been tried several times earlier when I received the error message to tell the parent disk had been changed since the child was created. I looked at the resolution and had a go at fixing.

  I downloaded the vmdk files to find the problematic descriptor file it corrected and then download the a back fixed to the data store. I then removed the VM of the inventory and then re he added before attempting to start it. He says now the specified file is not a virtual disk. Unfortunately, I didn't know that he was still working on a snapshot file and had been for some time. It was a former VM test that I had played a little bit with all learning on VMware, but unfortunately he had a few files on it which is no longer, I have backup ups for and I could really do with recovery of them! The base file and delta file are always on display in the data store and I can re - use the base file in a new virtual machine but I need the data from the snapshot if possible file. Not sure if it can be manually engaged at the base (I have a copy of). I'm new to this depth of troubleshooting and according to research I realize it is a great chance, the data is not recoverable. Having said that if there is no hope at all then I would try or at least have someone who knows what they're doing a go help before you tell me everything is lost! I'm not really bothered to get the virtual machine running again, but must be able to copy some files in the C drive.

  Any help much appreciated.

  Thank you

  Craig

  I can't tell you if the data in the virtual drive itself can be retrieved by the attached hard file. However, it seems that you have used an editor who added a BOM (Byte-Order-Mark) at the beginning of the file, which made her an invalid for ESXi.

  André

• Purchased a Canon G3X and raw files will not download. Is still a patch out for this camera?

  Purchased a Canon G3X and raw files will not download. Is still a patch out for this camera?

  It doesn't look like Camera Raw 9.1 is compatible with Photoshop elements 13. But you can download the 9.1 DNG Converter and create DNG copies that work with Photoshop Elements.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• I have paid for XI today but still have no idea how to change a PDF file - XI has well but I'm still not sure if XI is downloaded properly

  I paid for XI today, but still have no idea how to change a PDF file - XI worked fine but I'm still not sure if XI is downloaded successfully @.

  Hello Leo,

  Please, watch the following videos to learn how to change the PDF file:

  http://TV.Adobe.com/watch/i-didn' t-know-acrobat-xi-could-do-that-tutorials/pdf-editor-edit-text-and-images-in-pdf-file/

  http://TV.Adobe.com/watch/learn-Acrobat-XI/editing-a-PDF-in-Adobe-Acrobat-XI/

  Kind regards

  Anoop

• First CC still not not using the thm for DSLR timecode files?

  I'm looking to confirm that first Pro CC still does not use sidecar files mov Canon DSLR thm files to extract the time of day timecode when importing. I know PP CS6, it only did not. Just checking to see if it is always the case. All DSLR files import currently with 00:00:00:00 timecode as technically most DSLR cameras are not real timecode in the mov files.

  My solution to workaround for recent years was of qtChange allows to add time camera of day timecode files thm files before importing in first mov. It doesn't seem a big deal, but when sending the changes to a colorist, for example, they LIKE a kind of timecode to help their end. I should add that qtChange can also add a name of coil for mov files, which is an additional subtlety to the calibration software.

  It would be nice to skip this additional step before importing.

  I'm heading over to the wishlist now to request this feature in the future PP updates.

  Thank you!

  Billy

  THM files are not used by first Pro CC. You should always use something like qtChange to add a TC track that is appropriate in the MOV file.

• Project file still CS5 does not open - any suggestions?

  I have a recently created (and saved) project that I've been able to reopen and modify for my client several times in the past two months, but now refuses to open (even the backup copy). I get the following error when opening the project:

  "Cannot open the project; This project file was not found. »

  Nothing has moved from its original location - always in the same folder when I created it and worked on it.

  Does anyone know of a workaround to solve this?

  Thank you very much - I don't really want to have to start all over again on this project-, or I will still never approve with a major client project if it is a normal behavior!

  Jeff Foster

  PixelPainter.com

  Just open the old project I'll work a bit.  Here are the two things:

  First of all, I had one of the issues I mentioned above.  Source assets were not available, and yet it flexes and gives me a chance to locate them - just as we would like.  I expected this and can be achieved without them - except that I discovered that in both cases, the source file has been converted prior to importation, and still does not create a new version of this.

  Second, I can create the error that you got (project cannot be opened; file not found) by copying the entire directory (containing folders and files .ncor), then changing the name of the ncor file without changing the project folder again (it is at the same level as the project file).  Therefore, if the project file is named "sample.ncor" still has created a folder called "sample" (and inside the folder is "cache" and "sources" etc.).  Rename sample.ncor in sample1.ncor with a project with her record still named the sample results in the error.  Chaning this folder to sample1 name translates into no error.

  I'm not saying it's the only way, this error occurs, but look at your .ncor file - what is the name?  What is the name of the project folder?

• How to resolve the error "the specified file is not a virtual disk?

  Hello - I have a ubuntu/linux host running vmware 1.08 with a SBS2003 VM that recently ran out of physical space in HD. After adding a new drive hard I know to get a specified file is not a virtual disk on one disk error I try to add - the other 3 work. After looking around here, I checked the file descriptor and it seems in good condition.

  My paper does not help because I can not start the virtual machine with the hard drive, I need.

  What are some solutions that I can try?

  Thanks for any help!

  B.

  Unfortunately, you lost the data of zero bytes hard snapshot files. I hope that you don't have a backup of your data, since the snapshot was created in January!

  To be able to feed the virtual machine - even with the disk data corruption - replace zero files hard bytes per who has 327680 bytes, which is essentially an empty file with only the metadata.

  André

  PS: as mentioned earlier, please save the files until you turn on the virtual computer to be able to return to the current status in case you should!

• Uninstalled PSE6 Mac 10.6.8; reinstalled; actions not here; they are in the usual folder on hard drive; remove the multimedia file in PSE6 closed; restarted the computer; Let regenerate; still not here

  Oops think I put all the info in the title.

  Uninstalled PSE6 Mac 10.6.8 (had printing problems and wanted to go back)

  Reinstalled

  Actions not here

  Actions show that they are in the folder under the PSE6 Macintosh hard disk in the folder Photo Effects

  Deleted Mediadatabase.db3 PSE6 being closed

  Computer restarts

  PSE6 opened and let regenerate

  Still not here

  I don't understand. When you uninstall PSE 6, you also uninstall all the third party material, that you added. You have to reinstall them after reinstallation of PSE.

• Suddenly slow file menu

  Hello about 3 weeks ago I noticed that my file menu became very slow...

  Basically, if you have a timeline or preview window selected and click on the file that he rowed for 4-5 seconds even deal with the menu "export"... I know there is another thread on this subject, but the issue has not been resolved it and the poster did not provide enough information or reply to the comments of the problem...

  I've attached a video recording of the show going.

  First Pro CC 2014 Menus Slow - YouTube

  Also, codec for my source video information:

  

  The video file was saved with "Action!" Recorder using the Nvidia NVENC Codec. I got no problem using these files in the past Adobe first Pro CS6 and CC 2014.

  I have installed the latest updates, and the problem is present for about 3 weeks now.

  I did all the usual stuff like clean the media cache reset preferences, I tried to use different audio materials, thinking it may be problematic audio drivers for my interface with no luck.

  Also the media files are stored on a separate disk with read/write speeds pretty decent and healthy under conditions checked by "smart".

  I have no audio plug-ins loaded vst project.

  The only plugin I installed first pro and media encoder is the 'NVENC export Plugin' for fast gpu rendering of lightning but I also deleted it and tested with no luck.

  EDIT:

  I just copied the source to a new disk files and deleted the old drive to my system of problem still not solved.

  I hope I've provided enough information here!

  Kind regards

  Ryan!

  No, thanks to the support of adobe for failing to correct this problem.

  I contacted them 3 times by phone and said I would receive a reminder the next day with a solution and has NEVER received a reminder.

  I SOLVED the problem myself...

  SOLUTION: format your pc after formatting and re installation CC all images, files and projects worked perfectly from the diskettes.