Slow internet speed because of the Marvell Yukon LAN driver

Similar Questions

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Connection of slow internet speed of Time capsule

  I have a time Capsule airport of 5th generation 2 TB (802.11 AC) and a modem TP - LINK TD - 8816 ADSL2 (bridged) connected to the TC. In recent weeks, a very slow internet connection has been detected (get the go-ahead in TC and airport utility)

  Of course, I started by judging my ISP but then realizes that configuration back to the modem for PPPoE over Ethernet, the connection achieved expected quotient of internet speed.

  I have reset the TC back to the default settings (to erase all of the current settings) and set it up again with the new and cool settings. Same results.

  For the record: I have experienced same speed slow results at the TC test by wireless or ethernet connections.

  Airport Time Capsule is running 7.7.3

  MacBook Pro (retina, 13 inches, end 2013) OS X El Capitan 10.11.3

  I came back to use the modem router Zyxel provided by my ISP with internet high speed optimal but misses my TC!

  Thanks in advance for your support.

  I'm in the same boat... There is something seriously wrong with the TC in PPPOE mode. And nothing you can do that on it. Apple has all the controls available in the outside world.

  I got around it by using a modem router or other router between modem bridged and TC.

  In the end I put the TC in static IP mode, and it worked very well with another router.

  See Re: time capsule Airport Guard disconnect

• Slower Internet speeds in a VPN

  I installed a new ASA 5510 on our internal network as an endpoint for our VPN connections. This ASA replaces the endpoint of the VPN on our ASA outdoors. I installed a VPN group profile and activated DTLS on the interface on the ASA. The only interface on the ASA's inside interface. We did tests of speed while on the VPN of two devices. When tests connection to VPN on the ASA outside speed show download speeds between 5 to 8 Mbps and upload of. 80-. 96 Mbit/s. When connecting to the VPN inside ASA speed tests show between 2 and 3 Mbps et.76 Mbps download speeds. When I run the command 'show svc web-session' on two cases that I see that the connection from the firewall to the outside indicates that the protocol used is DTLS however inside it does not DTLS.

  I think part of the problem is that DTLS is not used. What can I do to improve my download speed? The ASA will use DTLS if the interface that is used is the inside interface?

  Thank you.

  Hello

  DTLS uses UDP 443 while TLS is TCP 443.

  and if DTLS is blocked somewhere, then the tunnel you will return to the TLS, but you must use DTLS since that it provides (the old comparassion TCP VS UDP) performance.

  Please check if the path between the customer inside the interface does not block the UDP 443.

  HTH

  Mohammad.

• Satellite A105-s4064: where to find the Ethernet controller (LAN) driver?

  Hello, I was recently forced to reformat my Satellite A105-s4064 due to some virus problems, and now when I look at my device manager my Ethernet controller is not installed.

  I checked the main site and they don't have an Ethernet controller I've ever seen.
  I can just be giving on it or research in the field of evil, but anyone know where I could find the Ethernet Controller driver for my laptop?

  Thank you
  Chris

  First of all, it would be interesting to know which driver LAN do you need? XP or Vista

  Second, the A105 laptop is an American series. I know that because of the last digit in the model number. 5 at the end means that it is a series that was designed for the American market and you need to find the drivers on the Web from Toshiba site we!

  However, if I understand correctly, you have already activated the Device Manager and the network card is not in the network adapters. There is an unknown device. Am I wrong?

  Often the LAN chip must come from Realtek. Then maybe you should try to download the driver directly from the Realtek page.

  Check it out

• Satellite 1400-253: where to find the card network LAN driver

  Hello, my network adapter does not work and I can't find a driver for it anywhere. Can anyone help?

  Thank you

  Paul

  Also, I wasn't able to find the LAN driver on Toshiba page.
  But I had an idea. The network adapter that is installed in this notebook supports a
  network I / F chip Moab (Intel 82551 (Lavon)).
  You can try to search for the drivers on the Intel page for this LAN chip.

• Where to find the XP Wireless Lan driver

  I have run your routine Identification and the LAN card on my machine is an Intel Pro/Wireless 3945 ABG, 11.1.0.100 driver version references, my OS is Windows XP Pro, the download-only that show you for this version of the driver is for Vista 64.

  Where then would you please?

  Steve

  Mr. S. J. Windsor
  Director-general
  CONSULTEK Ltd

  Hello

  Please see the new download page under http://aps2.toshiba-tro.de/wlan/?page=downloads
  As I see the 32-bit Vista driver is here.

• Slow download speed while streaming the videos or surf the internet.

  Original title: download speed a video sttreaming or movies and private information: e-mail account, bank information, etc.: very, very slowly. as if something is blocking the download speed.

  Hi Jeff Wohkittel,.

  -What web browser do you use for the stream download/videos, etc?
  -You are using an internet connection wired or wireless?
  -How long have you had this problem?

  In the meantime, see the following articles:

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Why slow internet speeds of Windows 8?

  Do a search on any search engine, and you will see that Windows 8 is considerably slowing down internet connections and each each Web site (within a Web site velocities are not too bad), no matter how the settings and adjustments are made to the configuration of a computer. Microsoft seems determined to deny this reality - but we users many would prefer that she in fact invests the time and energy to a difficulty. I have a brand new HP Envy h8 - 1520t, inflated and loaded with all the bells and bells, including a "Premium" LAN card The new HP is sitting in the room of a machine from DELL (Windows Vista) absolute Core Duo for eight years that whips its tail on the internet high speed. Basically, Windows 8 stinks. If I had known it was this bad, I would have ordered a Windows 7 machine on clearance and saved a ton. I adjusted limit bandwidth, network, power saving mode settings, etc. and increased my internet cable feeds at 30 MB/s with the addition of power and a new modem/router - but Windows 8 it always chokes down so that the internet creeps into my new computer out of breath. Online gambling is, as are streaming videos (for example, ESPN, NASCAR, etc.) and other features "live." And I just dropped more $2 K if I could have anyone.

  How long until what Microsoft offers a patch?

  For me, I tried all the fixes I could find and nothing has worked. Turns, the brand new computer was worse than the old windows wireless adapter 7 that was fast. I ended up spending my extension wireless in the room with my laptop and then using an ethernet cable for the laptop the Wireless extender. Problem solved. I hope this helps others who hide their laptop and use another monitor, a keyboard and a wireless mouse.

• Losing Internet connection because of the default gateway is not available.

  I keep losing internet connection and when I run the troubleshooter, it comes up saying "the default gateway is not available". I have an HP with Intel dv6985se. I was advised to do the following:
  I had the same problems of chance which I fixed it by simple disabling 'SLEEP ON DISCONNECT' SideScalng disconnect

  1 Access Device Manager (Control Panel > system and security > system > Device Manager)
  2. expand the network adapters
  3. Select the adapter that you are using (if more than 1 Repeat step 4 to 8 for each adapter)
  4. right click and select Properties
  5 click Advanced
  6. If you have installed Nvidia Ethernet configuration click the button
  7. scroll to the bottom of the list and disable the device sleep on disconnection and receive Side Scaling
  8. save the settings

  I appreciate this help info but none of this applies to my computer has. In my device under 'Network adapters' Manager, I do not have Nvidia, Asus and AMD, which is listed under my network cards is "Intel Wireless WiFi Link 4965AGN" and "Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)".

  The help that I've provided says disabling "Sleep on Disconnect" and "Receive Side Scaling"... or those who are in one of my "adapter properties tab advanced options" for both my Intel and Realtek... no where does say anything about sleep on disconnect or side scaling.

  I was online with HP cat many times and Ive tried the options they have provided that is basically what I've found here but nothing has worked so far! My computer is 1 1/2 old and is preinstalled with Vista 64-bit. Recently, I have completely restored my computer with Windows 7 64 bit, and ever since then, I can't download anything or talk to HP or any kind of help because I lose the connection. Could someone please help me solve this problem... to be frank and honest he pisses me off beyond words that I never had this problem when I'm on Vista!

  I don't know what else I can provide to better help me to solve this problem, but if anyone would like more information on what programs etc, my computer has let me know and I will provide the information. Below, I'm pasting the info I received through my history of troubleshooting like a Notepad of paper Network Diagnostic and Route.Print document.

  Windows IP configuration

  Name of the host...: Helvis-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-1F-3B-A2-B7-6B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::58d1:7968:4f2e:e873% 12 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Wednesday, 10 March 2010 19:03:56
  End of the lease...: Sunday, April 17, 2146 01:58:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 218111803
  DHCPv6 DUID customer...: 00-01-00-01-13-1C-37-DE-00-1E-68-7F-D5-C3
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  Physical address.... : 00-1E-68-7F-D5-C3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. Belkin:

  The connection-specific DNS suffix. : Belkin
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.2.3%14(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter isatap. {BC831AD2-8EB9-45C9-9FB7-D2CF0E447380}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e76:451:18e9:3f57:fdfc (Preferred)
  Address IPv6 local link...: fe80::451:18e9:3f57:fdfc % 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Print route Notepad document:

  ===========================================================================
  List of the interface
  12.. 00 1f a2 b7 6B 3B... Intel (r) Wireless WiFi Link 4965AGN
  11... 1e 00 7f 68 c3 d5... RealTek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  1... software Loopback Interface 1
  14.. 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
  15 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
  13 00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.3 25
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  192.168.2.0 255.255.255.0 on binding 192.168.2.3 281
  192.168.2.3 255.255.255.255 on binding 192.168.2.3 281
  192.168.2.255 255.255.255.255 on binding 192.168.2.3 281
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on binding 192.168.2.3 281
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on binding 192.168.2.3 281
  ===========================================================================
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  13 58: / 0 sur-lien
  1 306: 1/128 liaison
  13 58 2001: / 32 on a link
  2001:0:4137:9e76:451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  12 281 fe80: / 64 On-link
  13 306 fe80: / 64 On-link
  FE80::5EFE:192.168.2.3/128 14 281
  Over a link
  FE80::451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  FE80::58d1:7968:4f2e:e873 12 281 / 128
  Over a link
  1 306 ff00: / 8 On-link
  13 306 ff00: / 8 On-link
  12 281 ff00: / 8 On-link
  ===========================================================================
  Persistent routes:
  None

  Helvis,

  If the error does not recur in safe mode then there is probably a startup item or service causes the error. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet speed to use the Protocol 'ac '...

  How long should my internet connection be to use "ac" from my new iPad (Air 2, 128 gb)? It will be the last (official) version of iOS. My current wireless modem supports all protocols except 'ac '.

  First of all you need a WiFi modem that supports 802.11ac

  Read here:

  IEEE 802.11ac is a wireless network standard family 802.11 (which is marketed under the brand name Wi-Fi), developed in the process of The IEEE Standards Association ,^[1] offers broadband wireless local network (WLAN) on the 5 GHz band. ^[1] the standard has been developed from 2011 to 2013 and approved in January 2014. ^{[1] [2]}

  The specification a multi-station to at least 1 gigabit per second flow and throughput of single link of at least 500 megabits per second (500 Mbps). This is accomplished by extending the air interface concepts embraced by 802.11n: RF more bandwidth (up to 160 MHz), more spatial stream MIMO (up to eight), downlink multiuser MIMO (up to four clients) and modulation high density (up to 256-QAM). ^{[3] [4]}

• Cannot get internet access because I need a network card driver?

  I'm having a devil of a time trying to find how do I down load a NIC on a flash drive can I install it on my laptop Acer 5253 which will not let me connect to the wifi. I can download the drivers from the web, but not on a usb key then I can plug it into the laptop. I can't get on internet with the Acer laptop so Microsoft can not analyze the problem, and Acer will not even talk to me because the laptop is out of warranty. I am because of my wits end I have no intelligence of the computer. Can anyone help?

  Why do you think 'I can download drivers on the web, but not on a key usb then I can plug it into the laptop"?

  This is the right way to do it.

  The Acer Aspire 5253 download page has two NIC drivers wireless, one for a card equipped with a chip Atheros and the other for a card equipped with a Broadcom chip.

  I'm not familiar with how Acer does things; It is possible that if you go here and enter the serial number or SNID Acer, you can get a description of the hardware installed in your particular unit--> http://www.acer.com/ac/en/US/content/system-information

  Otherwise,.

  • Open Device Manager (click the start ORB, type device manager in the start search box and press enter).
  • Expand the "Network adapters" section and look at the entry for your wireless adapter.  You should be able to determine if you have an Atheros or Broadcom device by looking at the name.
  • If the name does not help, even on the 'Détails' tab, go to the Details tab, select "Hardware ID" in the drop-down list and post back with the first line up where 'SUBSYS' starts.  If you have Windows 7, you can right click > copy these data

  Example: PCI\VEN_14E4 & DEV_16B1& SUBSYS_96B11849 & REV_10

  Ensure the bold part

  If you have Windows 7 and have an Atheros device, download this driver --> http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Atheros_9.2.0.439_W7x86W7x64_A.zip?acerid=634601180335904424&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%205253&OS=712&LC=en&BC=ACER&SC=PA_6

  If you have Windows 7 and have a Broadcom device, download this driver --> http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Broadcom_5.100.82.87_W7x86W7x64_A.zip?acerid=634605483323458996&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%205253&OS=712&LC=en&BC=ACER&SC=PA_6

• Portege M400: He can't sleep because of the Terminal Server keyboard driver

  I can't put my M400 to sleep.
  Error: "because of Terminal Server keyboard driver"
  It provides the error message as above.

  I can't find direct response on the other forum that the roll back.
  My problem is that this situation has been the same from day 1, so I can't really push.

  Any ideas?
  concerning
  R

  This sounds like something wrong with the software or running services.
  However, the Toshiba power saver is responsible for the hibernation and the day before. I would recommend reinstallation of this application.

• Windows crashes because of the failure of State driver

  my computer has difficulties to stop, restart and stagnates in starting up. He has demonstrated the blue sreen of death and said that I should look for driver State failure. After doing my research, I discovered thanks to a blue sreen view application that it is caused by the driver ntoskrnl.exe. Please I need assistance on how to solve this problem as soon as possible, as this has been occurring regularly now. I don't want my pc to pack completely. Thank you in anticipation of your response

  Hi Niranjan,

  I did the process what you said but he said that "the system cannot find the file specified."

  With the info you gave me that I decided to test without a bootable dvd, and I still had no success.

  Finally, I tried refreshing my pc from the settings menu, and he prayed for the dvd for her to continue. The process has been a success, but I lost most of the applications as u mentioned previously.

  I shut down my pc to check the problem and it stop. I will keep testing until its safe to say that it has been solved.

  Now can you please give me a list of things to do and do not help protect my pc and avoid such a situation in the future.

  Thank you for your help so far.

  Joseph ilunga

• Re: update driver Marvell Yukon ethernet on an Equium A300D

  A month ago, I think it was I got an alert on the Toshiba Tempro tool for updating a driver for Marvell Yukon ethernet on my laptop driver. I downloaded the zip file by following the instructions on the site of Marvell (an updated driver was published on 18-08-08) and tried to install it, but that's when I hit a problem. When I try to install it tells me that a previous version is already installed and uninstall the previous version first.

  The problem is when I go to Device Manager and try and find the driver, the only entry is for a 'Marvell Yukon 88E8040T PCI-E Fast Ethernet controller', but the driver I was prompted to install was one of Marvell Miniport driver.

  At the time I just ignored him, thinking that the update was not relevant for me, but since then, I had a number of BSOD - the last afternoon - and in all cases when Windows has finished it's error report, it returns with advice that I need to update of the Marvell Yukon Semiconductor driver... and directing me to the download as I was originally directed worms by the Tempro alert. Of course again, it says I have uninstall the previous version before installing it, but as I can't find an earlier version of the Miniport driver to uninstall there is nothing I can do about it, even once I ignore it. Everything seems to work fine (apart from my current ignored problems of internet with my wireless connection and the fact that I can't seem to set up a connection wired (perhaps because this driver issue?), but sooner or later I get a BSOD even once, he accuses the Marvell Yukon driver so I'm back to square one.) I had the time BSOD now 4 or 5 in the last month.

  All advice appreciated.

  Hello

  Have you tried to restore the operating system to an earlier time using System Restore tool?
  Try it and let us know if everything works well again. If you leave and be happy without updates.