Slow internet via Satellite M105

Similar Questions

• Satellite C660D - error 651 attempts to connect to the internet via modem

  Hello

  I'm so stupid with this stuff so please make all responses for a 3 year old can understand.

  The problem - since a few years, I used a desktop computer and connected to the internet via modem wide empty tape and USB connection. Last week bought a Satellite C660D installed Windows 7 os provided and tried to connect with my modem, but failed miserably.

  I get the error message 651 but do not understand why.
  I use wired ethernet (because my friend does on their laptop) and tried the cable on their system, and it worked very well, so I don't think it's that.

  If someone is kind enough to explain what I do, I'll be able to keep this computer connected to the internet with usb and connect the laptop with an ethernet at the same time, so I can read the instructions while I go or I'll have to print the instructions and disconnect the Office before retrying the laptop? Yes, I'm dumb and I'm not even blonde, lol

  Thanks in advance for those who have the patience to try to help me.

  Hello

  Don t think that it s question computer laptop since many different users of the internet have reported the same error message with different but with pre-installed computers Win 7.

  There is no one-size-fits-all solution for this
  See this page:
  http://techietalkz.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

  There are several tricks to get this fixed an error
  For example: remove the Microsoft Virtual PC 2007 or disabling IPv6 for your connection.

  You will need to check the unique proposals would be interesting to know what will arrange in your case

• Satellite A60: Unable to connect to the internet via a modem - no dial-up

  In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

  Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
  The driver is asyncmac.sys = MS Access Remote network serial driver.

  I have:
  -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
  -modem uninstalled / reinstalled
  -update of Windows XP through windows update
  -update of the bios / modem / network drivers from Toshiba

  No luck, the RAS asynchronous card error is still there.

  Any suggestion?
  Thank you
  Alessio - Italy

  I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
  The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
  On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
  http://forums.practicallynetworked.com/showthread.php?t=6781
  I followed the instructions and run RArepair.exe.
  It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

• Satellite Pro P100 - unable to connect to Internet via LAN

  I have a Toshiba Satellite Pro P100. Model no SPSA4A-005002

  I used my recovery disc and erased from my computer, because of a virus and now I can't connect to internet via cable but my wireless internet works perfectly.
  Its quite dead there is no lights on the back of the laptop where I plug in the cable.

  Hello

  Your network card is properly recognized in Device Manager?
  In your case, I would try to update the LAN driver. You can get the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, you check the version of the BIOS. The most recent version must be installed and load default settings here.

  In the worst case, it s only a hardware problem and must exchange the motherboard together :(

• No internet via ethernet on my Satellite C660-1LCD

  Hi, I have a Toshiba Satellite C660-1LCD running windows 7. I have a router Thomson TG784 that connect to the internet via ADSL you.

  My problem is that the PC connects to the internet through the router using WiFi, but not through the cable.
  I checked that the cable works and connection to the Internet on another PC, so there is something special in the connection between the Toshiba and the router.

  I went back to factory setting on the Tosh and replaced network adapters.
  I also had the balance sheet to support PC, so I don't think it's the material.

  When I connect to the router, the connection of the material is there.
  When I ping a website, then I get a time out and a message that the computer is not possible to connect to the DHCP server.

  I also checked the setting on the router has recommended to the operator.

  Is there a setting I should do that I'm missing?

  Many thanks in advance,
  Anders

  > When I connect to the router, the connection of the material is there.
  > When I ping a website, can I get a time out and a message that the computer is not possible to connect to the DHCP server.

  Have you checked if IP address and other parameters in the TCP/IPv4 protocol are set to automatically assign

  In control panel navigate to the network & sharing Center
  Then on the left choose the change adapter settings
  Now, right click on the Local LAN network connection and choose Properties.
  Now you should be able to choose the TCP/IP protocol now, go to settings.
  You will find the IP address, DNS, etc.

• RV180 WAN/Internet very slow speed via WAP4410n (Port RV180 speed problem)?

  Hello

  I have a base set up on the RV180, no etc. VPN running 1.0.5.4 Firmware (latest) and use a browser of WAP WAP4410n plugged into a LAN of the RV180 port. I have a SG100D Gigabit Switch also connected to a port RV180. My WiMax ISP provides 12 MB.

  When I leave speed Port on the RV180 & WAP4410n on Auto neg. They hook at 1 GB and I have ONLY 2 MB Internet speed on wireless clients with no reported ignored packets on each device, when I change the port to 100 MB on the WAP4410n Rx. speed speed is normal at 12 MB!  The RV180 also indicates the speed of the LAN port for 1 GB... it is obviously wrong!  Obviously, forced to run the LAN of WAP port to 100 MB so I can get the ISP... normal speeds is limitation all my wireless to wired LAN traffic (and vice versa).

  I tried several configs RV180 ie. Simplified of bare bones, exchanged cat 5th etc. etc. WITHOUT change.  With another router, there is no problem with the port of WAP4410N at 1 GB and ISP speeds are normal. ISP speeds are also normal via the Gigabit switch to other boxes, BUT if I plug the WAP4410N in switch WAN speed is 2 MB if the WAP4410N is set to 1 GB port speed!

  With the RV180 unable to define a manual port 100 MB speed (see 1.0.5.4 Firmware release notes), that strongly leads me to believe that it is a problem of data Port RV180 specific WAP WAP4410N somehow.

  Their are many positions reports slow Internet with the RV180, but none of them have a solution.  Ideas, any help would be greatly appreciated that Ive lost too much time already trying to solve this router ÷ # $$ / / / &. As this is my first post I hope I posted in the appropriate forum.

  Thank you... Rob.

  Thank you for the update.

• Satellite A500-19W cannot be connected to the internet via WLan

  My computer got Win7 64-bit.
  We have 4 computers and all computers are connect to the internet via a modem.

  No one has never had a problem connecting to the internet until yesterday.
  They connect to the internet, but my computer does not connect.

  I encountered problems "problem with access point or wireless adapter.

  In summary, 3 computers are connecting to the internet, but my computer does not connect with the same modem.

  Please help me
  Thank you

  * I hope no errors in the English translation *.

  It is not easy to say what the problem is here, but try it please to toggle the device map local network once more. Use the FN + F8 key combination.
  Seeing WLAN on when you try to use internet?

  In my view, it cannot be a major problem. Be fair course of wireless network card is correctly activated. Also check in the Device Manager.

• Slow start up and close on Satellite M105

  Hi all!

  I had some problems with my laptop Satellite (M105-S3031). The problem is when I turn it off, I have to wait more than 1 hour for it can restart and when I do a restart, the laptop turn off, but he's there, he is not again. The other problem is that I can't play music (mp3) with it already installed software to support that can music but the laptop do not (frezz).
  I hope someone can help me with these problems.
  TKS.

  Hello

  It s a really strange question. It s very unusual.
  My old Toshiba laptop not that I bought several years ago was not able to open the .html files. The laptop each time frisottés after opening the html files.
  I sent it to the service provider and the guy changed the whole motherboard.

  It seems that the laptop is new and the warranty is valid.
  Everything must be done for free

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• Satellite M105-S3041: where to find a second memory slot

  Hello everyone!

  I just desperately on the TOSHIBA forums for an emergency with a few tech question (more than a problem).
  I own a TOSHIBA Satellite M105-S3041, I currently have Windows Vista Edition full, but only with 512 MB of RAM.
  Yes, he did run the badly slow, so I bought 4 GB of RAM (two sticks of Kingston 2.0 GB).

  Now, the real problem comes when I begin to wonder "how I go to install", I turned upside down from my laptop and I find this small 'door' affluent as a memory icon little engraved.
  So I guess that's where the RAM memory.
  Now, my wealthy laptop RAM TWO modules for up to 4 GB of RAM, as stated in the User Guide, but when I opened the small 'gate' I saw that he was (or seemed to) that a SINGLE module and I couldn't see the stick of 512 MB of RAM today!

  Until "my computer is running on imaginary memory!
  Laughing out loud! "and I can not find the second module!

  Help, please! I need to install any memory now and here where I live there Center support TOSHIBA No. or even a dealer who could help me!
  So I depend only on TOSHIBA online support!, IF possible, in response, I can get a link to a video tutorial or maybe you guys include photos in your answers to guide me?

  Thank you very much!
  Trino A.

  I think that it has already solved the problem. ;)

  Otherwise, he would publish again.

• Satellite M105-S3041 - where to find the correct drivers?

  I wiped the unit and reinstalled the operating system. Now, I can't get on the Internet.

  How can I find the driver appropriate for my Satellite M105-S3041?

  Hello

  I searched a bit using Google and it seems that you have a model American and therefore all drivers and tools that you can get here:
  http://www.CSD.Toshiba.com > download > laptops > Satellite > Satellite M105-S3041

  I hope I could help you :)

• Satellite M105-SP381: short battery life - 01:50 mins

  Hi guys,.

  I have a Satellite M105 and I think that Im not getting good battery life out of it. I have had the machine for 1 month and I can barely 01:50 mins on drums, with a minimum brightness and wifi, just surf the web and listen to mp3s. What is the performance expected for this type of machine?

  It has a 1.8 Core Duo, 1 GB RAM, 80 gb HD, ATI x 1300 14 "of clues? I use the watch system to "long term" Toshiba application. My battery was unaffected by the action of voluntary exchange of Toshiba.

  Thank you

  HI Juan,

  Different parts of the book will use you the power at higher or lower rates. Any component with a mechanical action (your hard drive, optical drive, floppy drive, etc.) use generally a little more power than the CPU, RAM etc.

  The effect is to drain the battery faster if the hard drive or optical drive is used. So, generally, is expected to get more autonomy if you use an application such as Word or Excel where there is minimum hard disk activity unless you're constantly saving or loading documents.

  In your case, playback of MP3 files will constantly have to load data from the drive hard (although cached to reduce the number of access) while you browsing the internet is constantly written pages in your Temporary Internet folder (as well as access to your anti-virus database). All this activity hard drive means that the hard drive is never allowed to turn down and therefore do not have to use the power of the battery.

  As long as you follow the usual recommendations to optimize your battery (let it fully discharge from time to time) I think that the time you get really is reasonable for the type of activity that you do.

  Kind regards

• Problem of time system on Satellite M105-s3051

  Hi all

  My satellite M105-s3051 has a problem in the clock. In the configuration, the seconds will not change. This isn't a rpoblem in the battery, because it saves the changes. When I go to windows, the windows clock assume it, but an hour before, he turns to time I rode in the configuration (1 our less). I've already upgraded BIOS 2.6, but the problem persists. Whenever I enter the configuration, the value I see is the last I have registration, without the clock change, the second number is freeze, as the minutes and hours.

  Any suggestion?
  Thank you very much.

  THE

  Hello

  What BIOS did you use?
  This laptop was designed for the U.S. market only, and the drivers and the IOS B must be downloaded and used from the Toshiba page us.
  You said you used the BIOS 2.6. Currently, only the 2.50 version appears on the Toshiba page and 5.20 versions for using Vista!

  Maybe you're using the wrong windows time zone?
  In the -> date & time control panel please check if the box on the right has been chosen.
  Check if the option automatically adjusts the clock to save the changes to day was marked, and if the laptop automatically synchronize with an internet time server.

• Slow Internet but network shares are ok

  First of all, here is my configuration:

  Dell Inspiron 15R (5520) Windows 7 64 bit

  ASUS RT-AC68U

  PSI rated speed: 30Mbps

  All the firmware and drivers are up to date and windows updates are enabled.

  I recently bought a new dual band router and have completed the introduction.

  When I try to connect my laptop to this new router via wifi or ethernet, my internet speed is less than 5 Mbps.

  Shared folder from my laptop to the network is very good and the speed is good too.

  iOS and Android devices to the new road via wifi gets 30Mbps full internet speed.

  When I connect the laptop to the old router (not), my laptop is able to get internet 30Mbps speed.

  Is there something I can do to improve the speed of the internet to my laptop computer connected to the router dual-band new?

  Hello

  I understand that concern you. Let me help you with the issue.

  There could be various factors at the origin of the problem as a firewall router, firmware obsolete, obsolete network drivers, bandwidth, etc.

  Are you experiencing the issue when bypass you the router?

  Some instructions that you can follow as indicated below.

  1. Obstruct free paths between your router and receive computers. Physical obstructions more between your router and computer, the lowest, the wireless signal is likely to be. Place the router in a central location with clear lines of visibility on your computer will help boost the signal.
  2. Use a wireless Repeater. Sometimes, it is not possible to move a router and the computer to create direct sight lines, or a computer may be too far from the router to get a strong signal. A wireless Repeater takes in a wireless signal and sends it with increased resistance to increase the signal. Using a Repeater wireless between your router and your computer sends a signal around obstacles and can improve performance.
  3. Reduce signal interference. Like radios, when two wireless networks are in the same area, they can interfere with each other. If you know that another router wireless is close to you, you can move the router to another area or ask the owner of the other router to move sound.
  4. Reduce the use of the network. Sometimes slow Internet use on a wireless network is not the fault of the network, but that too many users are connected to the network. Disconnect other computers connected to the free network bandwidth, and increase the speed. It is also important to block free riders to connect to your network and slowing of setting up your router password protection. Check the user manual of your router on how to set up a password.

  I suggest you to first change the string in the configuration of the router page and check if the problem persists. If many people in your building using the same channel, then you might notice a slowdown in your Internet speed. Switching to one of these channels will reduce interference and possibly increase your speed.

  If the problem persists, then try to update the firmware on the router in router configuration page. Given that the laptop works very well on old router, maybe the new router requires compatible firmware to allow an intense sound signal from the router again.

  Just reply to us with the State so that we can help you.

• DirecTV DVR not seeing internet via router TC

  I installed a modem Arris SB6183 on Comcast xfinity network.  The modem is turned on and connected to the network, xfinity without problem.  All my other devices connected to the TC and could see the internet without problem.  (Though, as I write this I realize that they were all apple devices.)  However my Directv DVR (HR44-500) did not see the internet via the wireless or ethernet cable.  My TC is a 3 TB A1470.  The installer has been in DHCP + NAT.  I also tried to give Directv a (local) fixed IP which address found DVR, but still couldn't find the internet.  When I plugged the DVR directly to the SB6183, without going through the TC, he saw the internet seems to indicate a problem of TC.

  After a few days of futile efforts, I have reconnected the router xfinity and replace the TC in Bridge mode.  Everything is working now and the DVR sees the internet, but I'm still pay Comcast 10 $par month to rent their modem.

  Does anyone else have this problem?

  You need to clarify a few things.

  I would expect questions for Internet access to the DVR by the TC without doing manual port forwarding. The DVR itself must be connected to the internet as long as you have the correct values for IP etc. Although I suspect that ipv6 might complicate the situation.

  If the DVR awaits UPNP router compatible... the TC is a failure. Apple is not compatible UPNP, adopting instead their own port open NAT - PMP protocol which is limited to most of the time the Apple products.

  To get out, you need to return to the configuration without your xfinitiy router... and give us a stack of screenshot... To see the complete configuration of the RECORDER and the TC... screenshots are the best way to do it.

  DNS, in particular, can be a problem... so make sure you use Google public DNS on the DVR and see if that helps.

  Any other suggestions we really need to see all your settings...

  Some screenshots of a working Mac or iPad would also show the configuration of a unit of work... rather than the DVR has failed.