slow printing/Copy

Similar Questions

• Slow printing Officejet J3608

  Extremely slow printing recently became a problem with my all-in-one Officejet J3608 printer.

  I have downloaded and run HP Print & Scan doctor. Everything checked out OK. Interestingly, the test page printed quickly and normally, but if I print a page of test or any file word.doc, its performance is very, very slowly.

  I installed Windows 7 and I just downloaded and installed the full driver for this printer package. No change in this situation. I also noticed that if I want to print several copies of a document, 2 copies and the following print quickly in contrast to the first copy!

  No error message. In the window of the printer, it just says: "... Printing" that it prints a single pass, then pauses, then another pass.

  Conducted a system Windows check but found nothing unusual.

  Dear all:

  My slow printing problem has been resolved. Malware object, PUP. Funmoods, has been the culprint. 50 times of this malware have been detected and eliminated by bytes Malware Anti-Malware software downloaded on Download.com.

  After a full of some 300 000 files scane, MBAM has identified the cause of my slow printing.

  This can be useful to other people whose efforts have failed to solve their problems. So, obviously, that there is nothing wrong with the HP Officejet J3608 printer drivers.

  Collis Davis

  Philippines

• DeskJet 1050: Deskjet 1050 slow printing

  Given that I have installed the printer software 1050 10 windows did not have the following problems: when I print a document feeds the paper, the printer then does nothing for a while, then part of prints, prints, stalls, stalls... the document is finished. If I photocopy a document it takes forever to print with it's stop start the effect. Any ideas? Dave

  Hi @Neptuno,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a printer all-in-one HP Deskjet 1050 with a Windows 10 PC and the printer takes a long time to print or even copy. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  Here is the document of support designed to be used with this type of problem - slow printing.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Officejet 5510xi all-in-one: very slow printing

  My printer takes forever to print a single page.  I got faaster to work at some point, but do not remember how and now it is not printing normally again.

  Welcome to the @Mary6268forums.

  I read your post on the matter of slow printing, you face your Windows 8.1 system when printing to your Officejet 5510xi. I have a few ideas in mind below for you to check and try, and I hope they help!

  1 be able to reset the printer:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  2. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  3. copy of test. Copies also produce very slow?

  4. print from Notepad. The tests also slowly produce here?

  Let me know the results

• Flashing slow print 6940

  My 6940, about 5 years old, will print one or two quick pages, as he used to do, but now will print multiple pages a Windrow at once, 15 seconds or more long period and then another, so usually I get an error FAILED signal.  No difference if printing several pages of a copy, or a multiple-page document.

  Computer OS is XP

  Slow printing is caused by the failure of one of your cartridges.  In my view, the Deskjet 6940 will print automatically in reserve if mode of ink is removed.  Try the following: remove the black print cartridge and print a sample page of the printer.  It prints at a normal speed (almost)?  If the black cartridge was at fault and should be replaced.  If the printer is still slow replace black cartridge and remove the color cartridge and print the page.  If the printer prints normally now the color cartridge was at fault.

• PSC2175 ALL-IN-ONE SLOW PRINTING

  PSC2175 all in one is grinding to a halt. Very slow to print/copy anything.

  Operating systems Windows Vista (Home).  Dell Inspiron 530 PC desktop model.

  Use Trend Micro Internet Security 2009 which is scanned frequently.

  By giving the command to print (from say Internet or Word) I get message "printing" and then it just sits (flashing green Copy). After a minute, it can print a line... then expected and repeats.  Takes 10 minutes to print the document.

  I have been informed that he is likely to be a fault of the printer rather than any virus from (?)

  My not great it skills.

  OK the printer is 4 years!

  Scotty48

  Don't you have the slow print even if you make a copy?  If Yes, then the likely cause is a faulty cartridge.  If your printer supports printing in reserve mode you can remove the black cartridge and try to print a page (not), if this is normal, then replace the black cartridge and remove the color cartridge.  The cartridge that prints at the normal speed is OK, the other is a problem and needs to be replaced.

• How to establish a "command bar" which includes: print, copy, etc..

  I would like to set up a "command bar" in Firefox similar to this bar that is available in Internet Explorer, showing one touch tools for print, copy, paste, cut, etc.

  The 'Tools' menu is not where you would find cut/copy/paste/print...

  Please, try the following and see if it is all along the lines of what you want to accomplish:

  Click the button for menu chart (3 horizontal bars) at the right end of the main toolbar to open it. Click the commands cut, copy, and paste, and then choose move from the toolbar.

  To change its position on the toolbar, or drag it to the graphic menu, you can use the Customize as previously mentioned.

  We get closer?

• Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called in the

  Found 0 results for my browser missing important elements, the menu..., whole tool bar drop down to print, copy, work offline, file, save, bookmarks, history. I just installed latest foxfire on windows xp. Found a few instructions, but they called the keys of my computer does not have (key under OSX there no file, edit, history, help, tools, navigation, all the things that your directions say to use. Also, I'm still hanging and the message a scrip is running. I don't know what are the thises scripts but I of course don't need them.

  This has happened

  Each time Firefox opened

  == I just noticed it. It probably happened when I upgraded foxfire.

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (Linux and OSX see: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• HP 8600 slow printing of diagrams and color photos

  I have a desktop HP 8600 printer pro jet and it's very very slow at the color print and diagrams (colored or not). I aligned the printer and clean the print head but it is still slow and I mean slow 2 5 minutes from printing a page.

  I also used the HP scanner/doctor and everything is fine with the printer is brand new.

  Help, please!

  Hello there bamitssam21,

  Welcome to the Forums

  I saw your slow printing problem you are having with your Officejet Pro 8600. I noticed that you have ran a print head cleaning, alignment and print and Scan Dr. indicates no error. There could be several reasons why slow printing occurs, the power of the printer for the program you are printing from (if the problem happens only in a single program) or even the pilot.

  I'll give you some suggestions to try and I hope that we can get rid of this problem!

  First, reset the printer and when you plug it back, just please make sure it is plugged directly into the wall socket. Avoid bars, surge protectors, nothing more.

  This may sound weird, but sometimes it really helps and solves the problem.

  Then, update the printers firmware: get the latest Firmware and product updates

  If the problem persists, follow this guide for printing slow: slow printing

  Good luck! I would like to know how to get you out, and if so, I'll help you gladly further.

  Thank you

• CN460A: ADF print copy with a thin line from top to bottom?

  ADF print copy with a thin line from top to bottom of page.  fine prints from the PC to the printer...

  This was probably caused by a specification on the thin glass used for scanning form the ADF.  See here for more information on cleaning this area to solve printing line when using the ADF.

• DeskJet 3755: Extremely slow printing, work stuck in the print queue

  Hey, I just bought a HP all-in-one Deskjet 3755 and put it in place and recorded. It is connected to my network, but I'm having a few problems.

  (1) the printer will only print jobs when it is connected to my computer by USB, even if I connected wireless.

  (2) print PDF print jobs EXTREMELY SLOWLY, over a minute for a page of text.

  Please do not just link me to support.hp.com pages... for some reason, they do not load on my computer (see the place completely empty, even if the HP site support work and charges).

  Thank you!!!

  Hey @anb9495,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the slowness of printing for the all-in-one printer Deskjet 3755. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot slow printing with your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• 5530 envy: Envy 5530 won't print, copy or scan

  Red 'X' on the lower right part of the screen of the printer is on and printer no longer works. Checked the utility application and was advised that black cartridge that is low on ink. Change cartridge. Utility program says ok now all levels. Tried to align, but although the printer display says 'printing', 'X' red down and nothing happens. Tried to print, copy and scan with similar results. Printer says it works but nothing happens. Have restarted printer and computer (iMac) without success. HELP please.

  There is no error message. The screen on the printer actually said 'impression' and the 'clock indicator' was renewable, but nothing was happening. When the operation has been cancelled and another operation selected is the same - no error message and everything seemed to happen normally, but nothing. Checked for paper and and cartridge jams - clear at all.

  Repeated undo operation retry printing a certain number of times and after about the tenth time, no reason apparent, it printed! Check all the other functions - all normal. A overall good wifi connection.

  Gremlins?

  Thank you for your help.

• LaserJet P3015: Slow printing to HP LaserJet P3015

  Hello

  I have a LaserJet P3015, which has the "question of slow printing. When I sent a job to the printer it takes 2 to 10 minutes to print. I have changed the drivers, added the printer directly on computers instead of the server. Nothing helps.

  Can you please give me some ideas how to solve this problem?

  Hello

  Thank you for your response. The problem is now resolved. It was caused by the printer PCL6 driver. Switching to PCL5 solved the problem.

• Epson Stylus dx5000 printer/copier/scanner does not print or copy, scan only.

  Original title: epson stylus dx5000 printer/copier/scanner

  This device is not printing or copying.

  This device is only scanning.
  I continue to be told that the spooler does not work, then stop and restart.
  Did it many times.
  Still no results.
  Epson genuine ink in the printer.

  Hi Carolina,.

  1. What is the operating system installed on your computer?

  2. you get any error message?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Please follow the methods and check if it works very well.

  Method 1
  Follow the steps from the link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  Clear printer spooler files and select the spooler service.

  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For all windows questions do not hesitate to contact us and we will be happy to help you.