slow printing in CS6 ID on the new iMac

My HP Laserjet 1320 printing is very slow ID CS6 (V 8.0.1) and other Adobe apps on my new iMac running OS 10.11.6. About 4 to 5 minutes before printing begins, even on the pages of text only. Printing has been very good to CS6 on the same printer on the old computer, MacPro under Snow Leopard. The new and older computers have 8 GB of memory. Any ideas?

InDesign CS6 only is not supported under El Capitan. You would be better advised to upgrade to InDesign CC2015.

Tags: InDesign

Similar Questions

  • CS6 transferring to the new iMac

    Hi all

    I currently have an old Macbook unibody with my copy of student CS6 edition.  I recently bought a new iMac and I am a little confused as to how to install CS6 when I use is no longer the adobe drive... Like the iMac do not have a hard drive!

    Everything I read says "just uninstall and disable it on your old phone and then install and active on the new device ' or 'you can have a single permit to run through 2 personal computers.  I don't know how to make this guy... Is it just a matter of logging in my creative cloud on my iMac and downloading from here somewhere?

    Help, please!

    Thank you!

    You can download the trial of CS6 and activate using your serial number.  If you like the idea of having available on both machines so don't worry the old installation... just install on the new and leave from there.

    http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

    Another resource of the trial:

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    http://prodesigntools.com/Adobe-CS6-direct-download-links.html

    If you happen to have a creative cloud subscription, CS6 programs are also available through here.

  • I have IMac 6 years with Pro CS6 and slow running.  I'll buy a new IMac and want to download the CS6 Pro Flash on the new IMac that do go for it?  I have my serial number, etc.?

    I currently have iMac, with Pro CS6, but it 6 years and running slow.  I'm going to buy a new IMac and want to download the CS6 Pro Flash on the new IMac.  Who should I contact for this?  I have my serial number, etc.?

    Hi byrone23065491,

    You may please check out the link to download professional flash CS6 on the new computer applications download Creative Suite 6

    * Enter the serial number of the product license.

    See also Adobe Creative Suite 6 system requirements

    Hope it will be useful.

  • kernel_task slow down the new iMac 27 "5K to a crawl

    I've owned my new iMac (OSX El Capitan 10.11.4) for more than 4 months now and have had no complaints other than those sometimes caused by the limited installed 8 GB of memory (an upgrade to 32 GB is on order).  Suddenly last week, I noticed my machine slows down considerably and heats up. Check activity monitor, I have seen that kernel_task took 200 to 400% of the CPU.  Despite the heat, I noticed that I could not hear the fan running, so I downloaded Mac Fan Control indicating the fan did not work - I took it in the center of authorized Service Apple and they confirmed that indeed the fan did not work and ordered me a new one that I expect.  I'm not sure that the fan has never worked - as I remember ever heard - I naively thought the new iMacs are just quieter.

    In the meantime, I'm trying to understand what is causing the problem kernel_task.   I noticed it uses very little CPU on most boot-up until I have load Lightroom (I'm a photographer and use this app heavily) after which zoomed up to more than 200% kernel_task, video playback has the same effect.   However, if I use only my browser for the e-mail and listening to iTunes kernel_task remains down on the only figure of % CPU and machine stay cool.   The person I talked to Apple's Service said she has seen this before and the solution was to do a clean reinstall of the operating system.   I want to save as a last resort - after setting of the fan and installing more memory.    I wonder if heat build-up missing a fan has an effect on kernel_task or help to have more memory?  In any case this is the report of EtreCheck:

    EtreCheck version: 2.9.11 (264)

    Report generated 2016-04-17 13:17:13

    Download EtreCheck from https://etrecheck.com

    Duration 05:18

    Performance: average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Hardware Information:

    iMac (retina 5K, 27 inches, end of 2015)

    [Data sheet] - [User Guide] - [warranty & Service]

    iMac - model: iMac17, 1

    1 3.3 GHz Intel Core i5 CPU: 4 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK MHz 4 GB DDR3-1867

    0/DIMM1 BANK

    Vacuum

    BANK 1/DIMM0

    OK MHz 4 GB DDR3-1867

    BANK 1/DIMM1

    Vacuum

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n/ac

    Video information:

    AMD Radeon R9 M395 - VRAM: 2048 MB

    iMac 5120 x 2880

    Software:

    OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

    Disc information:

    ST2000DM001 disk HARD APPLE disk0: (2 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (2) /: 2.11 TB (905,59 GB free)

    Storage of carrots: disk1s2 120.99 GB Online

    Storage of carrots: disk0s2 2.00 TB online

    APPLE SSD SM0128G disk1: (121,33 GB) (Solid State - TRIM: Yes)

    EFI (disk1s1) < not mounted >: 210 MB

    Boot OS X (disk1s3) < not mounted >: 134 MB

    Macintosh HD (2) /: 2.11 TB (905,59 GB free)

    Storage of carrots: disk1s2 120.99 GB Online

    Storage of carrots: disk0s2 2.00 TB online

    USB information:

    Broadcom Corp. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Canon Canon CAPT USB Device

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / Library/Extensions

    com [no charge]. FTDI.driver.D2XXHelper (1.0 - SDK 10.11 - 2016-04-07) [Support]

    [no charge] expressvpn.tap (20150118 - 2016-04-07) [Support]

    [loading] expressvpn.tun (20150118 - 2016-04-07) [Support]

    / System/Library/Extensions

    com.Wacom.kext.wacomtablet [no charge] (Tablet Wacom 6.3.15 - 2 - SDK 10.11 - 2016-04-07) [Support]

    Launch system officers:

    [loaded] 7 tasks Apple

    [loading] 154 tasks Apple

    [operation] 77 tasks Apple

    Launch system demons:

    [loaded] 45 tasks Apple

    [loading] 155 tasks Apple

    [operation] 88 tasks Apple

    Launch officers:

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-12) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-12-14) [Support]

    [operation] com.adobe.AdobeCreativeCloud.plist (2016-02-14) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2015-11-22) [Support]

    [operation] com.wacom.wacomtablet.plist (2015-11-04) [Support]

    [operation] jp.co.canon.CUPSCAPT.BG.plist (2015-08-23) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2015-12-14) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-12-14) [Support]

    [operation] com.adobe.adobeupdatedaemon.plist (2016-04-12) [Support]

    [loading] com.adobe.agsservice.plist (2015-11-22) [Support]

    [loading] com.cocoatech.pathfinder.SMFHelper7.plist (2015-11-22) [Support]

    [loading] com.expressvpn.tap.plist (2016-02-11) [Support]

    [loading] com.expressvpn.tun.plist (2016-02-11) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-02) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2015-11-22) [Support]

    [operation] com.surteesstudios.hddfancontroldaemon.plist (2014-06-03) [Support]

    [loading] com.wacom.displayhelper.plist (2015-11-04) [Support]

    User launch officers:

    [loading] com.adobe.AAM.Updater - 1.0.plist (2015-11-22) [Support]

    [loading] com.bittorrent.uTorrent.plist (2015-11-23) [Support]

    Items in user login:

    Fan of Macs control application (/ Applications/Mac Fan Control.app)

    Dropbox application (/ Applications/Dropbox.app)

    Other applications:

    [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

    [ongoing] com.adobe.CCLibrary.78432

    [ongoing] com.adobe.CCXProcess.53472

    [operation] com.adobe.acc.AdobeDesktopService.77152.F4AF8B93-6EA8-4645-B6BA-A978E4ACF8E1

    [ongoing] com.Adobe.accmac.75232

    [ongoing] com.crystalidea.MacsFanControl.992

    [ongoing] com.etresoft.EtreCheck.189792

    [ongoing] com.getdropbox.dropbox.104032

    com.rockysandstudio.Memory-[ongoing] Diag.104992

    [loading] com.rockysandstudio.Memory - Diag.Launch - Helper

    [ongoing] com.wacom.TabletDriver.143712

    [ongoing] com.wacom.WacomTouchDriver.143392

    [loading] 398 tasks Apple

    [operation] 198 tasks Apple

    Plug-ins Internet:

    AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-12) [Support]

    QuickTime Plugin: 7.7.3 (2016-03-22)

    AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-09) [Support]

    AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-09) [Support]

    Default browser: 601 - SDK 10.11 (2016-03-22)

    SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

    WacomTabletPlugin: WacomTabletPlugin 2.1.0.6 - SDK 10.9 (2015-11-04) [Support]

    JavaAppletPlugin: Java 8 updated 66 17 (2016-02-12) check the version of build

    3rd party preference panes:

    Fan HDD control (2016-04-16) [Support]

    Java (2015-10-07) [Support]

    WacomTablet (2015-11-04) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 2.11 TB disk used: 1.21 TB

    Destinations:

    [Network] data

    Total size: TB 3.00

    Total number of backups: 38

    An older backup: 04/01/16, 11:17

    Last backup: 17/04/16, 11:39

    Backup disk size: too small

    Backup TB 3.00 size < (disc 1.21 TB X 3)

    Top of page process CPU:

    6% WindowServer

    kernel_task 2%

    Synchronization of 0%

    0% AdobeUpdateDaemon

    0% captmoncnabc

    Top of page process of memory:

    803 MB kernel_task

    262 MB mdworker (14)

    213 MB Adobe CEF Helper (2)

    Mds_stores 156 MB

    156MO Dock

    Virtual memory information:

    1.90 GB of free RAM

    6.10 GB used RAM (3.39 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    17 April 2016, 12:56:18 test - passed

    Any suggestions would be greatly appreciated.

    In the meantime, I'm trying to understand what is causing the problem kernel_task.

    Bad fan is the cause. The machine is to be limited to avoid overheating.

  • printer scan works only with the new windows 7

    upgrade windows xp to windows 7 with the new HP Omni 220PC. Have a printer HP C309g-m. To scan from the printer to the computer xp, I had to use the HP Solution Center. The printer works very well with the new windows 7 program and new computer. I install wireless. No problems with it. Today when I went to scan a document with the HP Solution Center (I thought I had to use as before), this message came.

    "HP Solution Center cannot work because your device installation is not complete. Please connect the usb cable, or rerun the installation for a network installation cd. If it does not complete the installation, or you do not have the cd, access the HP help files by clicking on the start menu. "Everything I did. My installation CD said I had a version of the latest update on the installation CD, it was of no use. I went to the HP site and find a download for the drivers updated etc. I downloaded and installed. (although I don't know whether or not it was a duplicate of the drivers of devices on windows 7 for this.) I checked Add/Remove programs to make sure that the printer and the hp solultion Center have been added to the programs. they are listed. I can always scan with

    the hp Solution Center. Should I not this program to scan with this new pc? How can I scan from my printer now? I even tried to click scan on the printer, then scan to computer. the message I got was 'Try from scan of compurer. Refer to the documentation for more details ".  To be sure, I'm all mixed up now. All I want is for my scan printer to work with my new pc.  Everything works well except that scan thing, may help me understand what to do?:  Thank you

    all fixed. has crossed my computer to start then click HP click HP and open list. Went to my printer-clicked on my printer and clicked on the icon list to see if it worked correctly. This is a problem with the drivers and a box popped up with directions on where and how to download and install the devices for windows 7.
    Done this and tested it and everything works fine now. (Ihad already tried the HP site for support and downloaded and installed the fix suggested for the problem, but it did not work). in any case, its fixed and I hope that if someone has a problem, this information will help you.

  • I have CS6 Design Standard, I'm going to update my iMac, the new iMac runn OSX 10.10 and 10.11, CS6 works very well with it. Kindly advice.

    I have CS6 Design Standard, I'm going to update my iMac, the new iMac runn OSX 10.10 and 10.11, CS6 works very well with it. Kindly advice.

    Hello

    Please try system requirements | Adobe Creative Suite Design Standard

    Concerning

  • After you disable CS6 license on the old iMac, SN license won't work on the new iMac, please help

    Have a creative suite standard CS6, get rid of the old mac now. Had disabled the SN on old Mac. When I install the suite on the new iMac, it does not accept the SN.

    Only got 7 days lying around, please help. Thank you!

    Jerry

    Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

    -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

    - and http://forums.adobe.com/thread/1038761

    IF El Capitan Mac read below

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

    Maybe it's a fake because of Mac El Capitan and OLD programs error

    This information is a MUST to install old programs on Mac El Capitan

    -You can't get the same error message, but here are some links that CAN help with old programs

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

    -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

    -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

    -the guardian https://support.apple.com/en-au/HT202491

  • Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

    I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

    We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact

  • Can I install old Mac on the new iMac CS6 using apple migration Assistant

    Can I install old Mac on the new iMac CS6 using apple migration Assistant?

    You may be lucky, but you should expect problems if you do this.

    You must properly install your adobe software using the installation of adobe files.

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Install the CS6 versions alongside the new version of CC

    Adobe Announces the new Creative Cloud CC, they said that we will be able to continue to download and install older cs6 versions as the new versions CC.

    I wanted a really fresh and clean, installation and, before installing the new versions CC, I went through and manually deleted all my apps CS6 (from my Creative Cloud CS6 subscription) and then used the Cleaner Adobe app to clean my system and to prepare for a new facility.

    Now, I am facing a problem that I can't find a way to download and install older versions of CS6.

    Was it just a ruse by Adobe CS6 versions will remain downloadable/installable, or y at - it a trick to download files?

    I tried to download them from this page:

    http://prodesigntools.com/Adobe-CS6-direct-download-links.html

    But by clicking on one of the download links results in the following error:

    Access denied

    You do not have permission to access to " " http://trials2.Adobe.com/AdobeProducts/PHSP/13/OSX10/Photoshop_13_LS16.dmg ? "on this server.

    Reference #18.8d518c4f.1371561476.14166a88

    Please notify.

    I had the same problem, the solution is (maybe) - change of browser!

    I get the old 'files' 'Apps' 'Learn' with Google Chrome/Comodo Dragon. When I go to the opera - no problem, the new page 'Files' 'Download Center' CC 'Learn' works perfectly.

    Can be (old?) cookies or something else?

    Browser test switch and it might work!

    Peter

  • Design the Standard CS6 Suite doesn't work is not on the new iMac

    I just bought the new iMac 27 ". Good looking! I've updated the OS 10.8.2 I ran that Installer DSStandard CS6 and whatever else it took place without a hitch. When I try to start anything but Acrobat, before unexpectedly programs I have not even the boot screen. I have repaired permissions.

    Any suggestions as to what I'm doing wrong?

    Yes, this occurs when users try to copy it to the applications using Time Machine or the Migration Wizard.

    Please remove the software using the uninstaller programs located in Applications/Utilities/Adobe Installers.  After that it's over, you want to follow up with enforcement of the CS cleanup tool.  You can find the details of its use in the cleaning of CS for Setup issues tool | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

    Once you have completely removed software, then please reinstall from your installation media.  If you have further difficulties then please format the drive and only restore your documents and settings.  You will have more success to install with a clean drive.

  • How can I connect Epson R1800 with the new iMac?

    Older to make sure printer, but it is good quality and I have a lot of ink and the large photo paper I want to use up. The printer is connected to my iMac plus old (2009) with the cable provided with the printer and an ethernet (Sonnet simply fast) adapter. It seems that the new iMac is a 10/100/1000BASE-T Gigabit Ethernet (RJ-45 connector). Although my Sonnet connector seems to fit in the port, I can't get the computer to recognize that there is a connected printer. Until I can do that, it seems that I can't download the printer driver and everything what I need Epson. (Old iMac died, failed to retrieve the latest driver from there).

    So do I need a different Ethernet adapter? Alternatively, I have USB ports available, how to connect to the printer with a USB connection?

    This printer has a USB port so just connect with a USB cable to the USB port on the iMac.  Download and install drivers from here: printer drivers Epson v3.2 for OS X.

    After installing drivers go to Scanners & printers/system to complete installation.

    Printer is supported you in accordance with this Apple document: printer and scanner software available for download for your Mac - Apple Support

  • Creative suite CS 5.5 download on the new imac failed?

    try to download Creative suite CS 5.5 on the new imac. After hours of download file is corrupt. first I got the message disk images could not be opened.  then re uploaded with all the files and I got a bunch of coding.

    Please notify

    IF El Capitan Mac read below

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

    -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

    -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

    -the guardian https://support.apple.com/en-au/HT202491

  • Problem of strange color InDesign on the new iMac, retina 27 inches

    My old iMac 27 suddenly descended upon me and I replaced it with the new iMac 27 retina.

    Now, I have the strangest kind of problem of color I've ever met, but so far only InDesign. I him have not seen in Photoshop, Lightroom, Bridge, online or in any other thing with pictures.

    Sometimes, the images on InDesign look exactly as they should. Sometimes, the pictures same look flat and washed out. Other times, super saturated.

    The same image can look flat and washed out, then move just before my eyes Super saturated! Later he might well go flat again. So the next time I did scroll, look just... and so on...

    In theory, this should not affect my final print product - the same pictures look just the way they are supposed to when opened in InDesign in Photoshop, but it's really aggravating and annoying. I would like my InDesign product to watch on screen as close to what goes in their print job real as possible, even if the only place it really counts is what it looks like in Photoshop.

    Anyone know what is happening? Is that what I can do about it?

    Thank you!

    If you place RGB images with colors that are out of the CMYK range, they will be implemented in the document CMYK if you turn on preview of overlay/separation or if a page has any transparent object and your transparencies fusion space is CMYK.

    But what you describe seems more random, so you can try to reset your preferences and trashing your cache of InDesign folder

  • CS4 will not load after migration to the new imac

    I've migrated just of my older iMac to a new iMac.

    When I try to load photoshop I get an error: 150:30

    Apparently my license has been affected and is not recognized for the new computer.

    I have the CD; However, the new iMac do not have a reader of DVD player.

    Can I download it from the adobe site?  If Yes, should I completely remove my old program CS4?

    Migration does not work for the Adobe programs.  Uninstall everything first, then use the cleaning tool before installing.

    Adobe Creative Suite cleanup tool

    helps resolve installation for CS3 thru CS6 and creative cloud problems

    http://www.Adobe.com/support/contact/cscleanertool.html

    CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

Maybe you are looking for

  • How to remove temporary files in FF?

    Before moving to FF, I have used IE for my browser. When he slowed down, there was an option to remove the temporary files. Usually, that solved the problem. I don't understand how to do this in FF. Is there a way to do this? Thank you cjake

  • VxWorks in point floating support 2.0 missing (LV2011SP1 RIO4.1)

    Hello I have a strange problem with a CRIO system (9022) using LV2011SP1 RIO4.1 and MAX5.1. Since I had older Versions of LV on the computer I did cleaning upward in the components of LV and eventually remove all who belonged or was dependent on the

  • Cannot create folders

    I have 2 questions. I was not able to create a folder. For example, if I'm in excel and I want to save a file there is a button that says "new folder." When I point and click on the button nothing happens. For several months, I had was rename files t

  • VPN 3015 terminal settings

    I have two different VPN 3015 and using the terminal settings accompanying documentation for 4.7 doesn't seem to work. My settings are COM1 9600 8 N 1 Material When I boot the vpn 3015, that nothing is happening. Does anyone know what settings I shou

  • How to call a workflow vCO by script?

    Hi, expertsI would call a workflow via a shell script or a script powershell vCO? could you have an example of reference? Thank you!