Slow start. Error message at startup that says: c:\users\user\AppData\Roaming\adobe\sp. DLL

Very slow start.  Does not load favorites. Internet does not not & c:\users\user\AppData\Roaming\adobe\sp error message. DLL

The specified module could not be found.  Please notify.

Hello

 
  1. All changes made to the computer before the show?
  2. What is the message you get from the Internet does not?
  3. What is a wired or wireless network?
  4. Are you referring to Favorites in Internet Explorer? What happens when you try to load a?
 
Try the methods provided and check.
 
Method 1:
Step 1:
Start the computer in Safe with networking and check if any problems persist, check especially startup and Internet connectivity. Check out the link and follow the steps.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
 
Step 2:
If the problems do not occur in safe mode, and then perform a clean boot. Check out the link and follow the steps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
 
Method 2:
Check out the link and follow the steps. Check if the computer starts always slow.
Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2
http://support.Microsoft.com/kb/977419
 
Method 3:
To solve the network problem. Check the link and try the troubleshooting steps.
You can also check out this link and try the steps.
Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

Tags: Windows

Similar Questions

  • I have a Dell Inspiron 531, I can't Panda titanium to download when I put in the disk drive. Why the habit of this work? I don't have an error message, but my computer says that there is a threat in my computer.

    I have a Dell Inspiron 531, I can't Panda titanium to download when I put in the disk drive. Why the habit of this work? I don't have an error message, but my computer says that there is a threat in my computer.

    http://www.pandasecurity.com/homeusers/support/

    Link above is Panda Support for installation issues, etc...

    http://support.pandasecurity.com/Forum/

    Forums of users Panda at the link above.

    They will help the Panda support above links.

    See you soon.

    Mick Murphy - Microsoft partner

  • When I start my computer windows vista, there is always a pop ups saying that RunDLL error loading C;\users\user\AppData\Roaming\nmhciu.dll

    When I start my computer windows vista, there is always a pop ups box indicating
    RunDLL
    Error loading C;\users\user\AppData\Roaming\nmhciu.dll
    C;\users\user\AppData\Roaming\nmhciu.dll is not a win32 application

    Hi M.A.Rawat,

    ·         Did you do changes on the computer before the show?

    I suggest you to check and clean the boot if the problem persists.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

    I hope this helps.

  • Pavilion DV7 start error message - unable to start BTVSTACK. EXE, BTBIP. Missing DLL

    I have a Pavilion Dv7 (A3F83AV) running windows 7, 64 bit and recently to get the error message at startup telling BTVSTACK. EXE cannot start as long as BTBIP. DLL is missing.  I found that this has to do with the bluetooth, but I'm not sure which is better to corect this issue. Any ideas how to solve this problem?

    Thank you

    Hello:

    I want to try and reinstall the bluetooth driver and software for the wireless card model that your laptop uses the support page and the driver of your laptop.

    If it's an old dv7 notebook that has the HP bluetooth separate module, then install the HP software for your laptop. support and driver page of s.

  • Pavilion DV7-6000 series. Error message at startup invalid product information

    I didn't know that my motherboard was bad from the factory.  On the first day, I was unable to do a full factory restore.  I always send to HP.  They sent me a motherboard and after installing it, I was able to do a full factory restore.  It was amazing... However, I now have this error message at startup.  Does that mean exactly?

    When I go into the BIOS, information on the system is xxxxxxx.  When I go to HP technical support.  The product name, serial number and product number is yyyyyyyy.  I know it's fake, why?

    Please don't tell me I have to send it after all.

    OK I won't tell you who, but you already know this is bad and you need to call HP. There is a special piece of software used for 'tattoo' Board of Directors. I have seen a few cases where they just give you a link to download and instructions on how make the 'tattoo '.

  • Install errors with Windows XP Sp3 every time I try to install the updates or software, I get an error message telling me that I have a current installation.

    I have Windows XP version 2002 SP3 and when I try to download and install updates, windows messenger or things like this I get an error message telling me that I can not install because of an another current installation, I tried to find what is installing but I can't pinpoint what or where its tring to install. Y at - it somewhere I can look at or a program I can run to find this mysterious install so I can kill him. I really apperciate any help on this. Thank you...

    Hi friskymarine,

    1. do you run any Setup before the show?
    2. what updates you trying to install?

    We recommend that you restart the computer before start you the installation of update. If the problem persists, then reregister the Installer engine. To do this, try the following steps:
    a. Click Start, click Accessories and then click command prompt.
    b. at the command prompt, type the following and press ENTER after each line:
    MSIExec /Unregister
    MSIExec/regserver
    c. check the difference.

    Task Manager to use to see if any background program or process is running: http://support.microsoft.com/kb/323527

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get an error message "Cannot load or launch C:Users\Mike\AppData\Local\Temp\msuospuwo.exe specified in the registry" at startup.

    At startup I get the following error message: "cannot load or launch C:Users\Mike\AppData\Local\Temp\msuospuwo.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.  I tried to run my antivirus program, CCleaner and system fFle Checker, but the problem persists. How can I fix it?

    Original title: persistent registry at startup error message.

    Hi Mike,.

    Thanks for keeping us posted and share this information with us.

    I would like to run you a SFC scan.

    See the article-

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

     

    http://support.Microsoft.com/kb/929833

    Do get back to us and let us know the status. We will be happy to help you.

    Thank you.

  • Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

    Prob Winmail.

    Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

    Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

    Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

    Steve

  • "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

    "unrecognized usb device": error message every time that a usb device is plugged into one of the usb ports

    1. my laptop - acer aspire 5030 - has been having this problem for the last five months.

    2. I tried everything including changing service pack, as we have xp professional, he has recently upgraded to vista business 32-bit with service pack 1.

    3 tried all the methods start the laptop after a few hours, remove the battery, press the power button for half a minute, and so on.

    4. I finally he formatted a couple of times, but the problem is not.

    5. later, I improved the professional system of vista and installed the latest security patches, but the problem remains

    6. now, I started to update its drivers, although the device is identified to be connected, but is not recognized. "the error message" not recognized usb device "appears. I try to reinstall the drivers or upgrade of drivers, it does not. It displays the message "the drivers for this device are to this day.

    7. initially, the connection of the device, the drivers are installed but still the device does not show in Explorer.

    8. I tried to change some registry values by merging a regedit file in the registry - for display devices that are not present; but still, it has failed.

    9. I then tried to delete the file infcache1.inf in c:\windows\system32\inf, but the problem persists.

    10. Subsequently, I tried to create another registry entry to "disable selective suspend" in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB by adding DWORD and assigning a binary value of 1.

    11. I tried later also to uninstall all the system devices including USB controllers, drives and the storage controllers, who must still without success.

    12. I tried to see if the drivers in safe mode, which they did not.

    13. I tried to delete the following registry entries =

    HKEY_LOCAL_MACHINES\System\CurrentControlSet\Enum | USB PORT; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10318 & HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFCI-08002BE10200.  The computer does not have alow it.

    14. the BIOS indicates device pnp "disabled", which I also look for the BIOS settings, which do not allow me to change to change existing ones.

    15. I have not found the WINDOWS\SYSTEM32\drivers\USBSTOR file. SYS in my driver store. This affects the system?

    16. I also contacted manufacturers pnp devices that provided me with most recent and versions compatible drivers for my devices - namely an apple ipod & Seagate external HARD drive - but even after that the drivers are installed properly and the system rebooted the problem remains. Is this something to do with the updated playing driver registry entries does not after the update? OR is what registry entries are configured to only read the entries at the time of the installation of the OS?

    17. I also contacted local sellers who have suggested to me to change the "motherboard". This will help as a last resort?

    18. in the meantime I had also installed other operating systems to Linux - Fedora and Ubuntu; Full Windows XP - Home & Professional and Vista Edition. All these have been installed successfully but do not solve the problem of usb.

    19. I have also raised the original HARD disk & replaced by another HARD disk. also checked the power of all ihee and ehee usb ports to be at least 5 V. I also disabled the automatic deactivation of devices usb by the system. physical contact, ports and connecting cable is fine. the distribution of power is set at 10% for the ihee ports and 20% for ports ehee, which is what is should be the physical output is also close to 5V for all ports connected.

    20. all professional (hardware or software) should any solution for the problem of the usb ports on my laptop?

    Something that you haven't tried:

    How to fix USB device not recognized in Windows

    http://www.online-tech-tips.com/computer-tips/USB-device-not-recognized/

    I hope I could help

  • Error starting "C:\users\ \AppData\roaming\bjsila.dll startup problem.

    Original title: how restall appdata\roaming\bjsila.dll

    I had a virus and Malwarebytes anti-Malware module removed. and now when I start up Rundll box to say there was a problem starting C:\users\ \AppData\roaming\bjsila.dll.

    Hi Dimitridpa,

    This problem can occur because of a missing or corrupted Rundll32.exe file, conflict between software on the computer or due to infection by the virus.

    Method 1:
    Let's first virus scan run using the Microsoft Safety Scanner to make sure that the computer is virus-free.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:
    1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Method 2:
    If the problem persists, we will start the computer Safe Mode to check if the problem occurs in Mode safe. If the problem does not occur in Mode safe then you try affecting the computer in a clean boot state to find what startup item or service is causing the problem.

    Step 1: Start the computer in safe mode.

    Check out the link: Advanced options boot (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Step 2:
    To run minimum, follow these steps.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    N ote: after the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • I just bought a dell 2335dn MFP printer. I'm trying to run a my network. I get an error message on the printer saying "initialization"?

    just bought a dell 2335dn MFP printer. I'm trying to run a my network. I get an error message on the printer saying "initialization"?

    Seams to me you should seek support from Dell.
    Have you installed according to the instructions of Dell or did you just connect to the top and hope?

  • When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

    When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

    Hello

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • I'm a serious problem, I'm trying to install Adobe Acrobat Reader DC, I low and when I install it it goes up to half and an error message appears indicating that I already have a version but improved program installed, alone, that I have nothing... and al

    I'm a serious problem, I'm trying to install Adobe Acrobat Reader DC, I low and when I install it it goes up to half and an error message appears indicating that I already have a version but improved program installed, alone, that I have nothing... and already I've tried everything

    Hi lucasa43102598,

    If you are on the Windows computer, run this cleanup tool to completely uninstall Acrobat Reader DC Download Adobe Reader and Acrobat cleaning - Adobe Labs tool , reboot your system & reinstall Acrobat Reader DC using this link Adobe - Adobe Acrobat Reader DC Distribution.

    I would like to know if it works.

    Kind regards

    Nicos

  • I have the seams to get an error message after instilling my saying of the Lightroom program: an internal error has occurred. :/

    I have the seams to get an error message after instilling my saying of the Lightroom program: an internal error has occurred. :/

    Hi alexish,

    Greetings!

    This problem occurs only when Lightroom can't access the folder Adobe due to lack of permissions for the folder you want.

    Please see this thread an internal error occurred: failed assertion!

    See Solution 5 in the link:- changing error modules

    Let us know if this helps

    Kind regards

    ~Assani

  • I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

    I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers

    Please see:

    1. Creative cloud activation and login troubleshooting
    2. Adobe Download Manager cannot happen on the Adobe servers
    3. Cloud cannot create arrived on Adobe servers.

    You can try to remove creative cloud app and reinstall it.

    Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

Maybe you are looking for