Slow startup after installing the SSD because gray screen

Similar Questions

• After installing the latest updates, my screen on large icons, screen too big for my moniter

  the only way of difficulty was to uninstall updates.

  After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates.

  Sounds like something in the update causes a conflict with your video driver or change the resolution settings.
   
  The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together.  If you're lucky, the problem can not ride again.  If so, you'll know at least update is the cause of the problem.

  If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box.  Select the settings tab.  Look to see if the screen is correctly identified and if the resolution seems correct.  If you spot something wrong, change to the correct setting.  If everything looks correct, you can try to change the resolution to see if that can solve the problem.

  You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver.  Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components.

  If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates.   Doing so will be considered a last resort - especially if the update in question is one of the security updates.

• Portege R830 - noise after installing the SSD

  Hi all

  You just bought a R830 with Core i5 2520M and stock 500 GB 7200 RPM HARD drive. I traded for an Intel 510 series SSD (250 GB) HARD drive. Carried out the restoration of the system to the factory on the SSD condition. Everything works and it is lightning quick (boots on desktop in less than 20 years).

  However, I notice a few electronic sounds coming from beneath the trackpad (area hence is the HDD/SSD Bay) when it is moderate to heavy disk usage.
  There seems to be some sort of interference with perhaps the electronics of the lights under the buttons of the trackpad or somethings else?

  Should I be worried? And everyone knows it? In addition, those who bought factory installed SSD - do you have any type of drive noise?

  Thank you very much.

  Hi tn9393,

  On this way without this hear noise it is difficult to say if it of normal or not and what is the exact reason. Simple is that to analyze the disk HARD original of your laptop Portege. To determine if the noise is related to the disk (SSD or HARD drive) or it of a electrical part on the motherboard.

  But without this mode of operation it of not possible to give you a detailed answer because he user to user s only forum. If you need professional help contact a service provider allowed in your country and ask for help. Guys have professional diagnostic tools to check all on laptops.

• Slow startup after installing Windows updates

  Recently I started to use internet on my laptop. After a few days my windows 7 started to take about 15-20 min to start and reach the Welcome screen. When I went to the dell store they told me to complete updates failed, who were many in number and only 6 updates succeeded. I'm not able to install the updates of windows. and so my laptop takes a long time to stsrt, and even after the boot does not work correctly.

  Original title: boot windows7 problem

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the issue on Windows updates.

  I will definitely help you with this.

  Please provide the information below.

  1. you get any error message during the installation of the updates?

  2. what past exactly after you restart the computer?

  I suggest you go through the below methods:

  Method 1: Try to run the troubleshooter Windows updates:

  1. Press Windows + R key.

  2. Type command and press ENTER.

  3. Click on Troubleshooting.

  4. In the left pane, click view all.

  5. In the list, click Windows updates and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Cannot create recovery media after installing the SSD on Pavilion TS 11-e100

  Hello

  I just replaced the SSD HARD drive and tried to make a USB support of recovery through 8.1 recovery utility. The process takes strangely little time, but finishes normally have reported that the media are created. The size of all the files on the flash is about 200 MB. When I made the same support with disk size was 12 GB. I tried to start with than flash and it failed with a message on a damaged or similar medium. I always thought that windows does not take into account the physical structure of the disc and can not understand what is happening and what to do.

  Hello

  I use HP Recovery manager to create a recovery media for my machine ready and my wife. I use another software to clone HARD disks for other machines after any big change for example after moving from Windows 8 to 8.1, I create a clone which means I can't do it again, simply restore it back. Use a software called O & O DiskImage clone but the following free software can do the job:

  http://www.techsupportalert.com/best-free-drive-cloning-software.htm

  Kind regards.

  PS I tested once the 3rd software, it's ok

• Error of reactivation of Photoshop CS after installing the ssd

  Installed a disc SSD for win7 and my Photoshop CS wants to reactivate but I get an activation message is not available at this time.

  How can I reactivate it?

  The photoshop cs and cs2 activation servers have been taken down, so it must go down a non activating photoshop cs2 version to replace photoshop c and use the serial number provided on the download page.

  Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• My MBP in trouble after installing the Wacom Intuos driver.

  My MBP takes almost 5 minutes to start after installing the Wacom Intuos driver, I remove and reinstall but no change!

  and it seems that the machine was very unstable and very slow, sometimes the beach ball appears and no response for a few minutes and works again!

  I try to contact Wacom support in Hong KONG but still no body to answer my call...

  Can be resolved by upgrading to IE captain? Thank you very much!!!

  Wacom driver: 6.3.15 - 1

  News by cheque to be:

  EtreCheck version: 2.6.6 (226):

  MacBook Pro (13 inch, late 2011)

  MacBook Pro - model: MacBookPro8, 1

  1 2.4 GHz Intel Core i5 processor: 2 strands

  4 GB of RAM expandable

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 87 - SN = W01457N9TD3BA

  Intel HD Graphics 3000 - VRAM: 384 MB

  Color LCD 1280 x 800

  OS X Mavericks 10.9.5 (13F1507) - since the starting time: 4 hours

  Disc information:

  HGST HTS721010A9E630 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  1 t MBP (disk0s2) /: 999,35 go-go (590,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ - 8À8)

  Configuration files: (Does that mean?)

  / etc/hosts - Count: 57

  Startup items: (Does that mean?)

  PenTabletDriver: Path: / Library/StartupItems/PenTabletDriver

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.RemoteDesktop.plist -invalid signature!

  [loading] com.apple.screensharing.MessagesAgent.plist -invalid signature!

  Top of page process CPU: (Does that mean?)

  55% mdworker (3)

  4% kernel_task

  4% WindowServer

  2% fontd

  2% hidd

  MacBook Pro, OS X Mavericks (10.9.5)

  Speed up boot times-

  Start time - speed (2)

  Start time - speed (3)

  file/etc/hosts - fixing a pirate

  You might also consider adding more RAM. 2 places I've seen recommended more to buy reliable RAM are below. I have bought RAM several times to other World Computing and have always been very satisfied with the product and the service. They have instructions online on how to replace the RAM. OWC has also tested the RAM above what Apple says, it is the maximum. Now, I have 6 GB installed on an iMac 2008 so-called beginning limited to 4 GB and noticed an improvement.

  Crucial

  Other World Computing

• VM won't boot from CD after installing the OS

  After installing the OS (Win2K) on my virtual machine, it will not be able to boot from the CD.  I don't know how to boot from the CD.  I need to run a repair on the BONE because when I originally created the virtual machine I have only the CPU to the attributes.  So, I assigned a second processor on the virtual machine, but I need to run the repair for the HAL for multi-cpu operation.

  How to configure the virtual machine to boot from the CD?

  Change the settings on the virtual machine and select it to go into the BIOS at the next startup and set the boot order for the CD before the hard drive

• After installing the runtime Visa my mouse moves with COM data

  I'm sorry, I don't know anything about Labview I use prepared GUIs.

  After installing the runtime Visa540 my mouse moves whenever I get the COM1 data. How can I turn that off?

  You use a USB-serial adapter?  Has been sending peripheral data when you start the computer to the top?  The device sending the data while the USB adapter has been being connected?

  It's probably a Windows problem.  If you connect a serial device (adapter USB-serial anytime or a build/PCI serial port at startup) and the device sends data, then Windows think that standard equipment is a mouse.

• Many BSOD after installing Samsung SSD 840 pro in ThinkPad Lenovo R60

  Have an old Lenovo ThinkPad R60 with screen SD that I won't. After installing the Samsung SSD Pro 840 the BSOD started coming, now every week, the last one on today. I don't see the option to download the dump anywhere file, so I enclose a picture with - maybe - some info.

  Can anyone help?

  Thank you

  okinchi

  

  Not at all surprising that involved C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. Pilot of the SYS Symantec event library.  I remove it and use MSE in its place

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• No icon after installing the application

  I'm back in coding after a VERY long time (over 12 years) and am myself easing with HTML5 for the Playbook development. I managed to put together a very simple little app, especially as a test of the procedure for packaging and submission... and maybe get a free Playbook for my wife who covets my 64 GB baby!

  Anyway, had everthing packaged and signed using ripple (an excellent program once I worked out how to use it) and he expelled.

  Last night I got a reply that it had been rejected because "no icon after installing the application.

  When I sent the thing to Blackberry I included two .png files, which was to be used as an icon, but I think I was also to include in the compressed... am I right in thinking, I should have added a line of code in the XML file to set this?

  I feel like a total * beep *... like the time where I got a test paper in college without putting my name on it!

  Welcome to BlackBerry WebWorks development!

  Yes, you provide your name and the home screen icon in the file config.xml WebWorks.

  Here is an example of a config.xml file:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/code_sample_creating_a_bb_widg...

  Here's a guide for each of the items in this file.

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_developing/working_with_config_xml_file_1...

  Also, for your interest, check out some examples of existing applications published on github:

  https://github.com/BlackBerry/WebWorks-samples

• Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  The adobe reader program no longer exist in my C drive.

  I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...

  Please help because my exams are in 5 days and all my study material must be opened with pdf!

  Thanks in advance.

  Hi, Fabien,

  Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?

  Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html

  Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards
  Rahul Tyagi

• After installing the version 36.0 whenever I go to a Web site, I get "server not found" and I have to refresh

  After installing the version 36.0 (yesterday) on the desktop and laptop, whenever I go to a site that I get "server not found" and I update the site to access.

  I checked my firewall and it is configured correctly.

  And I changed the proxy for 'no proxy '.

  Still not fixed.

  Thanks in advance.
  David

  I went back to the 35.0.1 version and it seems to have solved the problem.

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

  After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

  Zbynek

  P.S. Here's the screenshots for the two problems:

  http://astrofoto.euweb.cz/tmp/black_stripes.jpg
  http://astrofoto.euweb.cz/tmp/color_boxes.jpg

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.