Slow to connect wireless

Valet works fine with cable but it takes 5 to 8 minutes for laptops to have a local and internet access. With old wrt54g, it was almost automatic. Tried several computers laptops and netbooks, and same thing. Is sitting there saying 'identification '. Uninstalled and reinstalled Valet nothing helped. Once connected, it works fine, but just too long to connect. I tried to turn off all firewalls and antivirus/security setup nothing helps. Any suggestions?

Change the wireless channel on your router to 1 or 11, and also on your computer, go to the properties of your adapter and uncheck "TCP/IPv6" Protocol and click OK... Remove all the networks in the list and then try to connect to your wireless network.

Tags: Linksys Products

Similar Questions

  • Slow to connect to the network computer.

    C7280 VIA Wired/Ethernet > Linksys wrt54gs i7 Desktop Core 6 GB RAM HP Vista 64-bit wired to the router & Toshiba L305 Core2 Duo 3 GB RAM Vista HP wireless

    I just installed a C7280 with all the bloated SW. Now everything works fine except when I boot the comps. they are very slow to connect to the network.

    Anyone encountered this problem?

    Alternatives?

    Thanks in advance.

    I read in this forum somewhere on a slow startup of PC and internet connection very late after installing the HP software. What has worked for them was to change the Startup Type of the service "Device HP CUE discover the Service" automatic to manual or automatic (delayed start). Why not give that a try.

  • T400 problem with slow speed internet wireless. Help, please

    Hello

    Just got my new T400 (276581U) and I am very happy with it. However, he has a problem. I searched extensively in this area and other forums, but have not found the solution. So any input or help would be greatly appreciated.

    Problem:
    upload and download speed is very slow when connected to wireless broadband. Measures download speed 1 Mbit/s on www.speedtest.net, while two other computers (XP and Vista) reach speeds 6 Mbit/s on the same network wireless download.

    I tested the computer via LAN and here it downloads at normal speed of 6 Mbps.

    OS: Windows 7
    Network cards:
    Intel 82567LF Gigabit network connection (driver version: 10.1.6.0)
    Intel Wifi Link 5100 AGN (driver version: 13.0.0.107)

    I have download all the latest drivers on the Lenovo support site. The pilot Gigabit Network Connection, I downloaded however Intel, as there is no driver windows 7 on Lenovo website. The Intel driver has improved my connection to the local network (before that I could not download the full site content) and it has not changed my connection Wireless for the better or worse.

    Wireless configuration:
    Wireless g connected to the modem access point high speed
    So, to access internet, I need to connect twice, first the access point, and then click the modem to broadband. This configuration works on two other computers in the House. The lenovo is however not seem to recognize that I am online, even when I am. The symbol "not connected" is always displayed in the toolbar, and diagnostic tests tell me that I'm not online. That might relate to the problem.

    Thanks for reading this. I hope that some kind soul can help.

    pass under the power manager find advanced settings and then look for the Manager of the electric network... its value usually on the default energy savings

  • Computer Dell laptop connects wireless but not online

    I have a Dell laptop that I bought about five months ago. We just bought a router wireless about two weeks ago and it was working fine until a few days ago, when the internet connection is slow all day until we have reset the internet modem itself. That day, my computer wouldn't connect to the internet after a few hours of surfing on slow internet. After that reset us it, he started to work very well. Then, the next day it was working fine until it just stopped to let us browse the internet. My desktop computer that uses a USB connection wireless and the Xbox 360 with WiFi, both work. Now, I pressed my button wireless countless times, and I am connected to my network with almost full bars. Some of the software on my computer can connect to the internet, as the update of windows, but I can't use any internet browser - I use Safari, but I tried as well IE. When I look at the plan of the connection, there is a line dashed to the router from my computer, but he always says that I have full internet access. Has connectivity IPv4 and IPv6 is not. I tried to uninstall my card, but it did not reinstall rebooted once and I undid the system restore I had tried a few days earlier to pick up my internet. We also tried to connect with an ethernet cable - says there is connection, but also will not let me do anything. Also, I ran diagnostics on my cards and Windows said reset, but I still have the problem and it "resets" whenever the diagnostics are executed. IP address of my router starts with 192. I've searched and searched for answers, but nothing works.

    The new answers?

    Hello

    Try the following steps:


    Step 1
    : first of all, temporarily disable the firewall settings and security software and check if it makes a difference.


    NOTE
    : Please check you to re - activate the anti virus program after reviewing the issue.


    Step 2
    : make sure you have the latest updates and service packs for Windows Vista.

    Reference: http://windows.microsoft.com/en-US/windows-vista/Install-Windows-updates


    Step 3
    : battery Reset TCP/IP.

    To reset the stack TCP/IP go to this article and click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • computer is slow when connecting to internet

    computer is slow when connecting to internet

    Hi Jerome,

    Until we provide troubleshooting steps, we would like to know as a result of information from you.

    (1) do you use Internet Explorer to access the Internet?

    (2) what Internet connection type you have? Is it wireless or wired?

    (3) don't you make changes to the Internet connection settings prior to this problem?

    Follow the steps in the link given below to solve the problem.

    Optimize Windows performance

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

    Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Write to us at the State of the question. We will help you to come.

  • Toshiba AT200 refuses to acknowledge my connection wireless home

    My AT200 refuses to acknowledge my connection wireless home.
    1st time, that he could not recognize, I restarted the broadband system and then recognized.

    Now he just continues to scan and will not find the connection?
    I tried to manually force but he said that it is not in the range - even when I'm standing right next to the box.

    This is a major issue - what is a Tablet without wifi connection - right?

    > Is there a way to reset to the factory settings?
    To reset to factory settings Android, go to:
    Apps-> settings-> privacy-> data reset > reset compressed-> clear all

  • Can connect wireless Compaq Presario SR5214X desktop PC?

    Hello

    I have a Compaq Presario SR5214X desktop PC. Can I connect wirelessly to the network with it? Have you looked online and I refuse to pay support to meet a simple Y / question N can I connect wirelessly to my router?

    Concerning

    Hello

    Your PC does not come with a wireless adapter, but you can certainly install one in a free PCI slot: these are the white horizontal slots shown in the bottom left of your motherboard is an example of the type of card, you need to install on the link below.

    Wireless PCI card

    Kind regards

    DP - K

  • Unable to connect wireless on Satellite L300D-13 s

    Bought this new laptop Satellite L300D-13 s
    The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

    Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

    Hello

    The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
    So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
    Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
    Also make sure that your router supports standard WLan even as the WLan card.

    Welcome them

  • Office Jet 4620: Connect wireless printer without USB cable

    I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

    Thanks for any help.

    Hello

    HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

    If your PC is connected wireless to the router, restore the pritner as follows:

    1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
    2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
    3. Turn the printer off and turn it back on
    4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

    Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

    If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

    Kind regards

    Shlomi

  • 5532 ENVY: ENVY 5532 has a connection wireless but not recognized

    My printer is showing a Wi-Fi connection (the light is solid and blue).  I ran a test report and all past with a very good signal quality.  When I try to print from my laptop or iphone, I get a message indicating that the printer is not connected (on my laptop) or no airprinters (on my iphone).  Before last night, everything printed fine.  You can provide any assistance is greatly appreciated.

    Hi @shaunaB44,

    Welcome to the HP Forums!

    I noticed that you can not connect wireless printer HP Envy 5532 for your Mac OS X 10.10 Yosemite. I'm happy to help you with this problem of connection!

    To confirm that your printer hardware is working, you are able to print a test page from the printer control panel? Video: print a test page.

    You see error messages on the display of the printer?

    In the meantime, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). And let me know what happens!

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope to hear from you soon and thank you for posting!

  • Re: Disabled the connection Wireless on Win 7 - Portege R600

    I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
    When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

    I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
    BT Stack, etc.

    Does anyone have an idea?

    Hello

    Wait a minute;
    You want to activate; Modem WiFi or 3G?
    Please note that WiFi is not 3G modem.

    Don't forget that you have chosen and activated the modem 3G and not the WLan.

    Welcome them

  • Tecra M1 cannot connect wireless

    Hello

    This new but I hope someone can help me.

    I'm having difficulties to connect to a wireless network with my Tecra M1. I think that the problem could be with the card Intel (R) prowireless MiniPCI LAN.

    I tried to reinstall the driver for it, but nothing worked. I access the access point Via a cable but cannot connect wireless.
    I reinstalled the software PROSet I printed user's guide, and he tells me if he have Driver version "1.2.4.41". I have Driver version "1.2.5.34" installed on my laptop and this seems to be the only one on the Toshiba site, so I can't find "1.2.4.41" to install instead of '1.2.5.34 '.

    Any ideas where I can find this driver? I tried to let windows manage my wireless connection but not able to connect. I also tried free config but it couldn't connect either. All above can see the available network but cannot connect. Any ideas on a resolution. I am trying to connect via a router belkin G + MIMO.
    No problem connecting via a direct cable.

    Thank you

    Hello

    have you tried to connect with another machine to check if it works?
    Otherwise, I suggest the following things:

    -Disable all security features
    -update the firmware on your router
    -dhcp instead of IP´s sets the value
    -read the manual of the router, sometimes they have weird parameters

    and finally and most importantly, try to connect with your M1 to another access point to make sure that you connect your machine to a wireless network.

    Welcome them

  • I lost my connection Wireless at home.

    I have a time capsule/router.  I lost my connection Wireless at home.  Cannot get internet connection to one of my computers/devices in the home.  Help!

    Need to load more information.

    Feeding cycle you the entire network... Start up in the correct sequence?

    Modem... Wait 2 min

    TC... Wait 2 min

    Client devices.

    If this does not work...

    Tell us everything... what model is the modem? Is this also a router?

    What model is the TC... The base A1xxx please?

    The fact the main TC on... amber green or flashing led?

    Taken in a computer by ethernet that get you internet with wired connection, just all the wireless clients are turned off?

    Tell us about such things and we can work from there.

    But I suggest you a factory reset as well... Here are the basics.

    Start from a factory reset. No files are lost on the drive hard in doing so.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

    4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

    5 attach the TC disc into the computer manually.

    In Finder, go, connect to the server in the main menu,

    Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

    You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

    However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

    6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

    It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

    You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

    https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  • Can I connect wireless and cable?

    I work with a HP Officejet 6700 Premium, newly bought and installed in my older desktop that is wired. I would like to be able to print from my two laptops wireless as well. Is this possible? And if so, how?

    Hello

    HP Officejet 6700 can be wired to the office computer (USB) and can be connected wireless to other laptops. To install wireless, please see the link below.

    http://support.HP.com/us-en/document/c03086294

  • Loop drops when connected wireless (NI 9191)

    Hello

    I can't understand why an a chassis OR cDAQ 9191 a connection drops when connected wireless and works

    perfectly when it is connected to the LAN.

    I wrote a small essay VI to check the accuracy of the connection. The chassis has a module of e/s 9375 OR plugged.

    A Moxa AWK3121 is used as a wireless access point. What I do is check 5 digital inputs and control outputs 3 digital.

    The outputs are continuously placed power at a different pace. I use a loop of events and a main loopt that communicates

    on the chassis at a rate of 10ms loop.

    The chassis, the laptop and the Moxa A.P. are all close together on my desk. The Wifi signal is excellent.

    Now, the code I wrote is probably not optimal.

    But...  If I start by connecting the chassis with a LAN cable to my laptop, Wifi disabled, Local bound. Communication is perfect.

    No drops between loops and real-time.

    No communication error. Runtime was 52 minutes.

    Second test. Connected the chassis to the A. P. Moxa with LAN cable. Laptop connected wireless to the A.P. Moxa

    Chassis in Local link. IK can access the chassis in Max no problem.

    When I run my test, I immediately see pauzes loop. After a minute you can already a difference of 20 sec.

    between calculated looptime and in real time. The led on the chassis will sometimes market.

    When the light is out, the loop is pending. (Which is normal because I assumed that the acquisition of data VI are awaiting response).

    After appr.10 minutes the error-50405 'no transfer in progress because the transfer was abandoned by the customer'.

    If I look at the timings, there is already a difference more then 5 minutes between the moment where the loop and real-time.

    I tested with the chassis and the PC last connected wireless to the A.P. Moxa

    I don't have the error of 50405, but once again the loop drops. After 10 minutes, we went from 2 minutes.

    Someone at - it experience with wireless with the NI 9191 chassis connections?

    Can I change my code? I've put something? (I'm a newbie to Labview)

    For any help or suggestion would be appreciated.

    Thanks in advance.

    Frankie.

    LabVIEW 2014 SP1 (32-bit) on Windows 7 Enterprise (X 64)

    Chassis and Moxa all updated to the latest firmware.


Maybe you are looking for