Slow to respond to the card reader.

Similar Questions

• Portege A600-175 - failed to start the card reader device

  I got a Portege A600-175 running windows XP SP3 with a problem in the card reader device. Insert an SD card, it makes the sound that USB devices usually do when inserted (and also when it is removed) bur it doesn t appear on my computer. Do the Device Manager, it appears as a disc with an exclamation point on it and in properties, I see the error this device cannot start. (Code 10)

  I ve already removed the device and let windows find and install again but the problem persists.

  Thanks in advance for looking into it.

  Hi fjdc,.

  I think that you should look for an update to the driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the old version, restart the computer and install the version of the Toshiba page.

• Satellite Pro A100-81: memory Pro Duo card is stuck in the card reader

  I am the proud owner of a Satellite Pro A100-81. I inserted a Duo Pro Memstick into the slot of the card reader...

  The card slipped too deeply into the slot so that I unfortunately can't remove the card more.
  Any ideas how to remove the card?

  Hi Gary

  Are you sure that the laptop computer s card reader supports memory stick Pro Duo?
  It s unusual who supported cards will slip to deep into the slot, something as may occur if the card is not taken in charge and is not compatible with the slot

  However, you shouldn't t do anything hard disk average if you n t know how remove it ask someone to help him with more experience for laptop

• Tecra S10: BSOD when inserting adapter duo memoystick in the card reader

  Hello

  I have a Tecra S10-12 b PTS3BE.
  As soon as I insert a memorystick duo desk with or without a memorystick inside in my card reader, I get a BSOD.
  Similar to the user in this topic: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=165760
  Unfortunately the user did not post a link for the driver that solves the problem.
  I've updated to the latest driver for the controller card on the Toshiba site reader: Ricoh 3.54.04 however no change.
  Can someone suggest another pilot to try? I tried searching the site Web of Ricoh download but have not found anything useful.
  Any help appreciated as I now have to use the USB cable to transfer my photos :(
  FYI, SD card works fine.

  Hello

  I have no idea of what OS you use but the card reader controller
  Driver for Win XP downloaded on 15-10-09. It seems that it s among the newer versions. This time it s a 3.54.04.

  I think that you will not find a more recent version

  PS: Check if you BIOS is up to date. If this is not the case, the update.
  Moreover, as far as I know that not all card sizes are supported maybe you should try another card with the smallest size.

• Update Windows 7 breaks the card reader, causes random crashes

  Hi all

  I have a Satellite A500/026 that came with Windows 7 64 bit. Recently, I found only one) the card reader no longer works, and b) just after startup, I get an error message indicating that a component of software from Toshiba is broken down. Both developed these symptoms after a Windows Update, but I can't be sure that one.

  The card reader works OK if I start a live CD of Ubuntu, but do not work on Windows, so I guess the problem is with a Windows driver that has been "updated" during a Windows Update.
  Is there a set of drivers Toshiba I have to re - install after a Windows Update, or should I just wait that Microsoft fixes whatever-they-broke in whichever-update-it-was-that-broke-it?
  Any other ideas?

  Leigh.

  Try to reverse both previous OS using System Restore tool and see if this will fix the problem.
  For Windows update use important updates only. Do not install the updates options.

  Do back the OS first and send feedback.

• Photo number hurt after loading the card reader integrated

  My laptop is just three weeks, but when I download pictures from the built-in card reader, a number seem to corrupt.
  However if I open the live images the card they are fine... so it's the card reader itsself, which is at the origin of the problem.

  Everyone knows about this problem?

  Sorry, but in my opinion this has nothing to do with the card reader
  What cell phone do you have and could you please explain exactly what is happening?

  If I understand your question, the (name of the photo) photo number changes if you download files in the card.

  May I ask what card do you use?

  It happens with other files such as jpeg, mov, doc, etc...

• Satellite A200-PSAEO: could not find the card reader driver Vista

  Hello.

  I have the Satellite A200-PSAEO and I can't find the drivers for the card reader for Windows Vista.

  Any ideas?

  Thank you very much.

  Hello

  What of the installation of the Flash Media Driver v 2.0.0.6 released on 31-01-08?
  The Flash Media driver is driver for your bridge Media Slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  You can find on the page of the European driver Toshiba Satellite A200 PSAE0 download area.

  ;)

• Satellite A100-062 psaane: can not get the card reader to work

  Hiya... Please can someone help?

  I try to use my card reader with a Pro duo stick.
  I put it in the Pro duo adapter and when I put the card in the slot of the card reader that nothing happens...

  Thank you in advance if you can help.

  cordially imalive

  I use the memory stick duo adapter and when I on it on the inside of my Satellite in Windows Explorer is happening again drive (F) and symbol that shows Memory Stick.

  Try to please several times to put inside. I remember that in my case it worked after the third time I put it in the slot.

• How to remove the SD of the slot of the card reader - Satellite A100?

  Hello
  Is there someone to help me? I inserted a 64 MB SD card into the slot of the player card of my Toshiba A100 model. This is the first time that I inserted the card. The card is inside the slot. I can't get out! I have no idea how to remove the card from the card reader location. I can see the contents of my SD card, can open files too. But how to remove it out of the slot. Help me please give your idea to remove the card from the slot.

  Arjun

  Hello

  To my knowledge the SD card slot doesn't have a whole extra help as the slot PCMCIA to remove the card.
  You have to remove everything simply. Try to enter the map and move it. You can try using a pair of tweezers. Maybe it helps

• Satellite P300 - 18 M - use the card reader for Vista Ready Boost OK?

  Hello

  I have a P300 - 18M, and due to get a new phone, have a spare Micro SD 8 GB card.
  I put it in the card reader, and I currently use it for Ready Boost, even though I have 3 GB of RAM, there is certainly a performance gain...

  However, no one knows if this could endanger the card reader? (IE damage it in any way) to be used all the time?

  Thank you

  Jack

  Hmm. I wonder about the 8 GB card Micro SD.
  As far as I know and according to some details in the internet, Satellite P300 supports the microSD (with adapter) 512 MB to 4 GB.
  Usually the laptop card reader s should recognize either large 4 GB microSD cards.

  However I doubt it might affect the functionality of the card reader in the worst case that the 8 GB microSD card will not be recognized by the card reader

  See you soon

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• Error code: 0x8007045D when transferring files to the card reader.

  Original title: Error code: 0x8007045D

  Error code: 0x8007045D when transferring files to the card reader. Lost files. Running Windows 7.

  Hi Bernard Major,.

  1 did you change the permission for the files you are trying to copy?

  2. What place you are trying to copy the files?

  3. are you able to copy the same files on another computer?

  You can try to copy files to another location on the computer and check.

  Step 1:

  I recommend you to check if you have enough permission on the card reader to transfer files.

  See the link to apply authorization:

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  Step 2:

  If you're still having problems, then run Check disk to repair the bad sectors.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. Type X: (for the card reader drive letter) and press enter

  c. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area. You can save the data on the disk before you perform a checkdisk.

  For more information, refer to the article below.

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Note: This article remains valid for Windows 7 also.

  I also suggest you to check this problem with another USB plug.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Where is the connector on the card reader on the motherboard of the Aloe (p6777c)?

  I removed my Pavilion p6777c motherboard to add a secondary market of the cooler and reconnected all cables going to motherboard except the card reader cable.  I find no documentation indicating where the card reader cable connects to the motherboard Aloe.  Connector 4-pin fits on the bottom 4 of a USB connector pins, but if it connects to one I do not know which.  Any help is appreciated.  Thanks, Jeff

  Please see diagram below;

  

  ^                              ^

  ^                              ^

  ^                              ^

  The card reader can plug into one of the ports labeled USB5, USB6, USB7 USB8.

• Cannot remove the Photos from an SD card in the card reader in Windows 7 error "is an error error application attributes - produced - the media is write protected."

  Please check the post from Jetta48 on this article, for the workaround to resolve your concern.

  Have a nice day ahead!

  I agree with you and think it had something to do with a Windows Update. I got this computer with Windows 7 for a couple of years and it took until this month I got the problem. Cannot delete the photos when the card reader is on a Windows 10 computer either.

• Windows 7 64 bit without recognizing an SD card or SDHC card through the bult in the card reader.

  12/15/10 my computer Desk Top read SDHC and SD cards without problems through the media built in card reader, but the small import window to the lower right of the screen wouldn't do anything, I have to disconnect & reconnect to get rid of it.
  Then, on 18/12/10 if I inserted the card SD or SDHC card & NOTHING happen on the monitor. It was as if nothing was plugged. It would appear click on the Start button > computer as a removable storage but it wouldn't ask to import the photos. No window pop up or anything.
  If I have a SD or SDHC insert card in a USB adapter so that connected on a USB Port, it works fine. I tried with four different memory cards.
  Why the computer OS does not recognize that the inserted card & even the computer itself would know that it was inserted because there is a small light that flashes when something is plugged. But he doesn't want to import and MARK photos directly from the construction in the card reader?
  I was on the phone with gateway 3 times by train to update ALL the drivers & try the system restore on the eve of thatI know it actually worked.
  I even spent an hour and 45 minutes on the phone with a Tech. Microsft via the remote control and still could not solve the problem. Everyone wants to blame others, but I see a lot of people have very similar problems.
  My computer was purchased there are 4 1/2 months. It's a gateway FX6840-03e. It is a very powerful platform but suddenly something happened and now it will not import pictures from the card reader. I have to import via USB!
  The strange thing is that my sister told me that exactly the same thing happened to his computer about a week and half ago. It is configured to download & install updates automatically. I'm set up just to be notified to download and install myself.
  Why backup restore & would still work on a date that we both knew for positive that our computers were working very well?
  So we need help! Anyone have any solutions or suggestions? The only assistance we have received so far was "Re-install the entire operating system."

  Well Finally I found the problem of not being able to import images. After so much work and all try, same re-install windows7 operating system
  It turns out this is one brass bit inside the construction tabs in the card reader was not working properly! Just a. That's all it took. It would show that the card has been installed, the light on the computer itself would show a card has been installed, but he wouldn't ask to import.
  THANK YOU ALL for your help and suggestions! It was great.
  The computer is fairly new but it had a flaw inside the card reader. So, if anyone knows the same check the connection problem.
  Once again thatnk you for your help!