slow video

Similar Questions

• Z500 Touch is slow video playback of the external HARD disk

  Hello

  I knew video slow reading (more than a minute) drive external HARD on my Lenovo Z500 touch. I used different actors updated (vlc, windows media, Media Player Classic player) who gave the same problem. I have no video experience slow game with multimedia files on the HARD drive inside (less than 15 seconds).

  So, what happens? USB problem?

  Hi ColonelONeill,

  I try to boot my laptop with the power profile high performance. I was surprised to discover that the problem of the slow video playback of the external HARD drive has been resolved. When I double click on the multimedia file, it took my laptop less than 8 seconds to play. So, I does not work using HD tune benchmark.

  Thank you.

• Fast/slow video forward and back smoothly in flash with or without FMS?

  I want to play fast and slow video forward and backward smoothly. Otherwise it is possible increase or decrease fps video to achieve...

  with or without FMS in flash as3...

  Help, please

  The best you can do is seek() in another era and if you do it fast enough "' smooth. What it is based on is the setting of the keyframe for F4V/FLV/MP4.

  Without FMS, you are limited to tends ant () in keyframes. This means that if they value of keyframes 1 keyframe every 10 seconds, you can ask only every 10 seconds. Keep this in mind. It seeks to the keyframe closest at a time that tell you it to look for. This makes research almost impossible smoothly without tons of keyframes that add a lot of the video size.

  FMS has solved the 2 big problems. You can ask at any time with or without a keyframe here and it does not require to download the full video to look further. Progressive will require that you have already loaded the video in the field you're trying to get to. If you fast forward right on page load may not look beyond what it has downloaded.

• Satellite Pro P105 - oar and Vista slow videos

  Lately, my PC is bein very lag each time I watch a video and sometimes particularly slow to switch from one window to the other.

  I had a GE 7900 NFORCE and 2 MB of ram T7200 intel core2 DUO, I ran antivirus and anti-spyware.
  Everything seems fine but I can't possibly watch a video (I tried too many Windows video player and DVX) and sometimes even other applications become slower.

  Everything worked well until 4 days ago.

  There are perhaps too many background processes. Try to stop all unnecessary processes. When everything was OK when start checking all installed stuff. I think that some added demand make busy HARD disk and result is slow Vista.

• Satellite 2450-101: slow video

  Hello!
  I see my nvidia in mode "snail". But I do not set up this mode.
  -Drivers OK!
  -J' have 512 MB of RAM. I use 256MB and nothing. I use one and the same.
  -In the BIOS, the value by default... but... the same thing.
  -In Windows XP and Linux (Knoppix 5.1)... the same thing.
  -In live CD Knoppix 5.1 USB DVD... the same thing.
  -In a film, the video is slow, its not slow.
  -In a test on another comparison system, my lost 2600 P4 and P2 victory for me. less than 100 MHz in R / w.
  That's happened? hard drive? NVIDIA in the motherboard?
  Sound of footsteps hear NOW, but I don't hear anything in the right (hotel?).
  HELP PLEASE?
  and thank you.

  Post edited by: JavierHernandez

  Post edited by: JavierHernandez

  Hello

  You should check if you have all codecs installed that is required by your system to play movies correctly.
  I suggest to restore your system, install the latest drivers for nvidia to these sites:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  and the last pack of codec from here:

  http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm

  After installation of all these things make him a comment if the problem persists...

  See you soon

• Re: Satellite M70 - really slow video playback and dtrange metal noise

  Hello

  I have a satellite M70 laptop and a few days now, I realize that the video (youtube and any kind of videos) read speed is very slow, slow motion (my interenet speed is fine)
  and there is a noise of metal really scary kind when the video plays... u can not hear anything just as noise.
  Also when I open a file or a menu in windows u get theis King of metal noise
  I have checked the video and audio codecs and are later

  BTW: I can hear audio files in Media Player very well. It seems that this only happens with videos

  Any suggestions cause, I can't see the videos!

  Hello

  M70 fan here ;) have two of them.
  For a better understanding, I have some questions for you:

  Did you notice this problem if you use headphones?
  What is with playback of the DVD movies?
  Have you noticed the same behavior?
  When watching online videos is very busy HDD?

• Internet slow & videos won't play

  Runnning XP (SP3/automatic update, browsers (IE, Firefox, AOL), using Norton 360 and Norton Util to tune in to PC) slow Internet on all browsers and videos partially run then stop (buffering stops). Cable provider (Comcast) says everything OK.  Norton help no help.  Suggestions?

  Hi Saboutime,

  ·         You get the error message?

  ·         What version of IE are you using?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  For reference:

  Windows wireless and wired network connection problems

  Possible issues and resolutions for slow connection in Windows XP speeds

• Down load very slow video ing, the circle of flow right guard will perhaps 1 second video then back streaming

  How can I download and play better

  This happens if you have a slow to the content host connection - even if you have a fast internet connection, you can still have a slow connection to the host.
  Try to find another place to see videos of.

• Slows video playback

  Hello. When I try to play any video media, including DVDs or external on my computer notices - the image or the framerate starts to slow down after 10 minutes or more.
  After that, all the screens seem to slow down too for example. minimizing web pages etc.
  I have windows 7 64 bit.
  3 GB of mem.
  9200 NVIDIA geforce graphics card.
  AMD Athlon II X 2 215 dual-core processor.

  Someone at - it ideas?

  Thank you very much

  Hello

  Did you change on your computer before the show?

  Method 1: Run the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2: Uninstall and reinstall display drivers

  Step 1: Uninstall the drivers

  Follow the steps in the link to uninstall the graphics drivers

  http://www.nvidia.com/object/IO_13955.html

  Restart the computer.

  Step 2: Reinstall the drivers

  Visit the http://www.nvidia.com/Download/index.aspx?lang=en-us and try to download and install the graphics drivers.

  For reference:

  Ways to improve display quality

  http://Windows.Microsoft.com/is-is/Windows7/ways-to-improve-display-quality

  Hope this helps!

• Slow video playback (After Effects)

  Hi guys,.

  I just downloaded after effects CC and wanted to learn how to use it. I managed to create a composition and imported some video footage of test. However, during playback of the sequence on the timeline or normal preview playback is super slow. I don't know that I did something noob somewhere in the process. I use a macbook pro 15' and have never had any game of back pain or problems with the first CC. So, any help?

  You really need to go through these resources: starting After Effects

• Slow video playback when titles are added

  I use the first 10 Elements on iMac with 4 GB of RAM and i7 processor, and I noticed a weird behavior with the playback feature.

  Usually, it works fine but, if I add a title to a video track (EDITION-> new-> title), reading becomes very slow and sometimes it is completely frozen. I can "scrub" the timeline without any problem, but it seems that the 'play' button stops working. It happens also with simple video clips.

  Have you ever experienced similar problems on a Mac?

  Thank you.

  BRITISH COLUMBIA

  After that you put video, say in a title, or PiP (Picture in Picture), or add/change an effect, you should get a red line on the relevant clips. To get smoother playback, it should appear at least that/those clip, pressing the enter/return key. Note: you can limit the area of the timeline, with the WAB (work area bar).

  Hope that helps,

  Hunt

• Slow video buffering

  All my videos r buffering in a few seconds. This happens if facebook entries, e-mail attachments, TV replays etc. Also note some with audio delay of live radio programming. It also seems that certain images are long to load.

  All my videos r buffering in a few seconds. This happens if facebook entries, e-mail attachments, TV replays etc. Also note some with audio delay of live radio programming. It also seems that certain images are long to load.

  Everything on the Internet or network, or even if they are files stored on your local computer?

• NEX & Slow Motion video?

  One of the NEX cameras slowed good video? I have the original NEX-3, love it! ... but I'm looking to upgrade from NEX-6. I really want to be able to shoot, nice, clearly slowed video. If the iPhone 5 there... I think that the NEX series should too! ;-)

  slow movement in computer science? How? If no recording camera with 50/60 frames/second and poor idle need 250-300 FPS - there is not enough executives. If slow down you the film, you'll see markets - separate frames.

  I think that the NEX camera could buffering about 250-300 FPS in short records, you must add the firmware option SM.

• slowing suddenly, poor performance of Media Center, video breakup. __

  The same day (2.05.11) this Office trial has expired, and IE updated itself (Solution Explorer images became transparent), performance is significantly slowed. video but not audio break-up/freezing. mouse/slow scrolling and sliding, etc.. Uninstalled Office apps of the trial as editor, but on reboot, video problems returned. GeForce 8400 Gs. definitely not a hardware problem.

  Hi cybatrax,

  1. did you try to install IE 9 beta?

  Method 1:

  You try to install the windows update and also try updating the chipset and all the device drivers and check.

  Links:

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Method 2:

  Step 1:

  You can check the following link and try to run the Fixit of performance and check:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Step 2:

  You can also check out the following link and try the steps suggested to optimize PC for better performance.

  Check out the link:

  Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Slow FPS for HP TrueVision HD Webcam

  My laptop is a HP Pavilion dv6 Notebook PC, product number: LM720AV.

  Using the video capture software pre-installed, I received a really fuzzy, slow video. Thinking it was the software, I downloaded a free program that has had the same result - the freeware actually clocked the pace at 1-3 frames per second.

  Thinking that maybe it was an old driver, I tried to update through my device manager. Unfortunately, who has not solved the problem, as the driver - which is be CyberLink (Cyberlink Webcam virtual driver) - has proved to be up to date. When you ask a friend who also has a fairly new HP laptop on this subject, I found that his old webcam 'HP TrueVision"captured video at around 30 FPS.

  Surely the most recent version "HD" of this impossible webcam of poorer quality than the previous version, could? Is it possible for me to use Skype and record video at a higher rate? Any help to solve this problem is highly appreciated.

  Thanks a lot, RobJeffersonand sanjeevkafle. Rob for the original response and sanjeev for help Visual theadded!

  Quick Note: I found this just tick the box of 'Auto' for the exhibition before turning off the 'low backlight Compensation' - are both on the "Camera Control" tab - will solve the problem. the other options can be adjusted at your convenience. After turning off the low light Compensation, YouCam display has become almost black for me, but after restarting the software, I found that the photo adjusted to the light and works great.

  Again, thank yout to RobJefferson and sanjeevkafle. Well done to you two.