Small front port by IP source address?

Similar Questions

• How can I download photos from my camera card in the small front port?

  How can I download photos from my camera card once I put it in the small harbour in front of the computer?

  Hi Islarich,

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description, it seems you are trying to download images from the camera.

  It would be great if you could answer this question in order to help you further.

  You connect your digital camera to your computer using, USB cable or a memory card?

  To download the pictures from my camera to the computer, refer to the following Microsoft article:

  How can I get pictures from my camera to my computer? http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-get-pictures-from-my-camera-to-my-computer

  Troubleshoot camera connection: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-camera-connection-problems

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Protect nest wants several ports per device IP address

  Hi all

  Rather a strange this...

  I have 4 x nest protect smoke alarms or fire.  All seem to work properly and talk to each other.  I THINK (but I'm not sure) that they connect to nest/Google Internet because the software was getting updated.  So I do know that I have a problem to solve...

  I have configured each of them to have a static IP, and I put the port forwarding for each IP address to have Public and private TCP and UDP ports 80 for device 1, 443 for camera 2, 9543 for unit 3 and 11095 for unit 4.  These port numbers were given to me by the support of nest.

  BUT - when I asked for confirmation that these four setting was correct, I received this statement:

  I understand that you have assigned port 80 of your first protection, 443 to your second Protect and 9543 for your third Protect (or a variant of it).

  Please forgive me for not giving you a complete example of what you need to do before that. As I said in the paragraph above, all ports apply to all devices.

  So if your static IP address for your 1st Protect is 192.168.1.10 will be assigned TCP + UDP 80, TCP + UDP 443, 9543 TCP + UDP and TCP + UDP 11095 to it.

  You must then do exactly the same for the following 3 nest protects you have. Thank you this is a bit tedious, but I assure you there is no additional configuration required for this.

  How is it possible to assign 4 ports on a static address of P?  When I asked this with the assistance of the nest, the response was "I'm really sorry to say this, but it was already not my support framework to help you as I have with the router I was using personal knowledge of port forwarding and hoped that it would be possible for you to apply my instructions using the provided Apple of instructions that I shared with you"

  Ideas anyone?  Or should I just leave it alone because it wouldn't even be a problem to solve?

  
  

  So if your static IP address for your 1st Protect is 192.168.1.10 will be assigned TCP + UDP 80, TCP + UDP 443, 9543 TCP + UDP and TCP + UDP 11095 to it.

  You must then do exactly the same for the following 3 nest protects you have. Thank you this is a bit tedious, but I assure you there is no additional configuration required for this.

  How is it possible to assign 4 ports on a static address of P?

  To assign multiple ports to a single static IP address, just enter each required port followed by a comma, for example:

  Public or TCP ports: 80, 443, 9543, 11095

  Public or UDP ports: 80, 443, 9543, 11095

  However, you cannot assign the same ports for multiple static IP addresses.

• What source address should the NI9862 module CAN be used to send messages j1939?

  I am developing an application that will write and read on vehicle ECU road. I CAN NI9862 module and drivers XNET. I can read an ECU data. I can write a CAN bus frames but the ECU under test does not appear to read the message. I don't get any acknowledgement of bit type and the SHIELD in question (a dashboard) does not change its messages in anyway, nor change the gauges or witnesses.

  Complicating this is the fact that the ecu is 'Brand X' and it is PGNs belong to someone. I tried to send the message of inquiry PGN (PGN59904) but get no response from the ECU. I use the 255 (global) as my source address.

  Is there a source given for the NI9862 in J1939 address?

  Thank you

  There is no specific source for the NI9862 address. It can be used to simulate one of the 256 available addresses. If you try to simulate a test off-board tool, usually has an address of 0xFA.

  I'm afraid that if you do not know the PGNs he expects or addresses that it expects to see, you will have great difficulty to operate.

  Good luck

  Bob Young

• Hive - Source address and Destination or a set of addresses

  I have a financial client who has a question on the Source address and Destination or a set of addresses.
  
  They must provide a Source address and destination or a set of addresses, with a mask of network. Oracle has the IP address and Netmask (s) they would need for booty? And they would be the Source or the Destination?
  
  The INVESTIGATION period would come from the server of the hive? The Bank would need specific IPs or a range of IP addresses that will be used. So if all the Beehive exists in 123.456.789.xxx, they would be able to enter like this, but it is best to identify each IP separately.
  
  Also, assuming that the Bank and Oracle are in communication, that can be at the Source and that can be the Destination?
  
  If this isn't something that we can provide them, I may need something - an explanation--give them that could soothe their needs.
  
  Any help on this would be greatly appreciated.
  
  Brent

  Brent,

  Communication between the Bank and the Beehiveonline would normally be via the IP 156.151.25.7, which is the VIP for BeehiveOnline. It would be the two-way channel for communications over https, webDAV and the owners of o and OBEO protocols.

  The only time where we all change is if you use FTPS and because we put passive channels in place data transfer channel is given to one of the Middle-thirds to handle the traffic directly Bank to Oracle would be so throuigh 156.151.25.7 until the connection is established, and then the middle of the year-groups will manage traffic between the 2 extremities-this means that the traffic is two-way on one of the 3 the ip 156.151.31.35, 156.151.31.36, 156.151.31.37 addersses

  I hope this will satisfy the Bank.

  Phil

• "A computer at 192-168-1-1 has attempted to access one of the ports on your system (PTC port 2869) the source IP is an IP address that is not routable"

  This has happened on an incredible pace.  It worries me due to the fact that I had a procedure of detail with suppliers in Hong Kong.  Access attempts are extreme, as well, noted that it is access to Blackhole.  I need to know if my computer is in danger and if so how to avoid this problem.  Of note is that I use Facebook and you have Hotmail.

  The IP 192.168.1.1 is usually a router. What network equipment do you use? What program are you getting this error? Look at this thread:

  http://www.wilderssecurity.com/showthread.php?t=59493

  Try to disable the PnP features of the router and see if that solves the problem.

  I doubt that this has nothing to do with sellers in Hong Kong but if you want to make sure that your computer is clean, being proactive and scan.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• D6200 front Port help

  Hello

  I read the article:
  http://KB.NETGEAR.com/app/answers/detail/A_ID/24046/~/how-do-i-configure-port-forwarding-on-routers-...

  This shows the interface of Netgear engineering allowing an external port mapping to a different internal port. I want to run port 80 on my public IP address to pass to port 5000 on my internal network IP 192.168.0.5. (External_IP:80 front of 192.168.0.5:5000) On my D6200 option pass an external port to a different internal port is not visible as the example KB. I don't see Port start and end Port when adding a personalized service.

  Judging by the manual, I believe that the D6200 has no ability to translate an external port to a different internal port.

• MRM - 'monitor source address is not configured "?

  Greetings,

  I try to use MRM, but the "manager" doesn't seem to know its source, despite the research address as it does.

  I tried several source interfaces.

  Mrm - ip TEST Manager

  Serial0/0.1 225.0.0.1 Workgroup Manager

  senders 1

  2 receptors

  -----------------------------------------

  R3 #sh ip mrm manager TEST

  Manager:test/1.0.0.1 is not running

  Beacon interval/holdtime / ttl:60/86400/32

  Group: 225.0.0.1, UDP port test-package/status-report: 16384 / 65535

  Test mailers:

  5.5.5.5

  Receivers of tests:

  1.1.1.1

  -----------------------------------------

  R3 #mrm TEST start

  Source monitor address is not configured

  -----------------------------------------

  ???!!!! Another interface (loopback)

  -----------------------------------------

  R3 #sh ip mrm manager TEST

  Manager:test/3.3.3.3 is not running

  Beacon interval/holdtime / ttl:5/86400/32

  Group: 239.0.0.1, UDP port test-package/status-report: 50000 / 50001

  Test mailers:

  5.5.5.5

  Receivers of tests:

  1.1.1.1

  R3 #mrm TEST start

  Source monitor address is not configured

  -----------------------------------------

  I tried this on various 3640 s running enterprise 12.3 and a 12.2 (32) running of 2500. All have the same result.

  You missed this command, I think.

  "R1(config-mrm-manager) # 2 sender-list of recipients 1.

  While the Cisco IOS CLI parser accepts the command entered without the pair of keywords-argument access-list-list of senders, this pair of keyword-argument is not optional. For a test MRM work, you must specify the sources that the Test receiver should monitor using the sender-list of keyword argument and access list.

  This should solve the problem.

  HTH-Cheers,

  Swaroop

  ========================================

  ]

  R1 #sh ip mrm in

  R1 #sh ip interface of mrm

  State of the address of the interface Mode

  FastEthernet0/0 10.1.1.1 - receiver to Test upward

  R1 #mrm TEST1?

  start the start IP MRM test

  stop the test to stop IP MRM

  R1 #mrm TEST1 beginning

  R1 #mrm TEST1 beginning

  R1 #.

  R1 #.

  R1 #sh

  00:06:23: test of IP MRM 'TEST1' begins...

  % Of type 'show?' for a list of subcommands

  R1 #.

  R1 #.

  R1 #.

  R1 #sh ip Manager mrm

  Manager:Test1/10.1.2.1 is running, expiration: 1d00h

  Beacon interval/holdtime / ttl:60/86400/32

  Group: 239.1.1.1, UDP port test-package/status-report: 16384 / 65535

  Test mailers:

  10.1.1.2 n - Ack

  Receivers of tests:

  10.1.2.2 n - Ack

  R1 #sh ip Manager mrm

  Manager:Test1/10.1.2.1 is running, expiration: 1d00h

  Beacon interval/holdtime / ttl:60/86400/32

  Group: 239.1.1.1, UDP port test-package/status-report: 16384 / 65535

  Test mailers:

  10.1.1.2 n - Ack

  Receivers of tests:

  10.1.2.2 n - Ack

  R1 #.

  !

  Manager of mrm IP TEST1

  Manager group 239.1.1.1 FastEthernet1/0

  senders 1

  receivers 2-list 1

  !

  access-list 1 permit 10.1.1.2

  access-list 2 allow 10.1.2.2

  !

  !

  R1 #sh cdp nei

  Ability code: R - router, T - bridge Trans, B - road Source bridge

  S - switch, H - host, I - IGMP, r - Repeater

  Device ID Local Intrfce Holdtme Port platform capability ID

  R2 Fas 0/0 135 R 3620 Fas 0/0

  R3 Fas 1/0 172 R 3620 Fas 0/0

  R1 #.

  R1 #.

  R1 #sh ip int brie

  Interface IP-Address OK? Method status Prot

  Commissioner of official languages

  10.1.1.1 FastEthernet0/0 YES manual up up

  10.1.2.1 FastEthernet1/0 YES manual up up

  Loopback0 1.1.1.1 YES manual up up

  R1 #.

  ----------------------------

• How do I see the IP Source address of a customer using ACE One-armed-mode of loading balance HTTP proxy request

  I use a device of 4710 Ace deployed in armed mode, use Source TAR to balancing HTTP request to a couple of Proxy servers.

  Everything works well, but the thing is that I do not see the client IP addresses on the Proxy logs, so I can't keep track of them.

  Interfaces and the Nat configs are:

  interface vlan 200

  Description of server-side-VLAN

  Bridge-Group 5

  NAT-pool 5 10.1.1.5 10.1.1.5 netmask 255.255.255.0 pat

  entered service VIP policy

  interface vlan 300

  Client-Side-VLAN description

  Bridge-Group 5

  interface bvi 5

  IP 10.1.1.3 255.255.248.0

  Interface Client-Server virtual description

  IP route 0.0.0.0 0.0.0.0 10.1.1.1

  and the policy looks like this

  Policy-map multi-game VIP

  class port 80

  Balancing vip continues

  policy of balancing port 80

  NAT Dynamics 5 vlan 200

  The resource assignment:

  Sticky ip-netmask 255.255.255.255 address two CLASSES of RESOURCES

  Timeout 5

  Serverfarm Service80

  Any suggestions will be appreciated,

  Thank you

  Hello

  You can use X-forwarded-for to insert the IP address of the client in the header Http. take a look at the link below:

  http://www.Cisco.com/en/us/products/HW/modules/ps2706/products_configura...

  Let me know if you have any questions.

  Kind regards
  Kanwal

  Sent by Cisco Support technique iPhone App

• PS4 front Port help

  I had a problem trying to port before my PS4. I have the extreme of apple and have created a static ip address, then I went and entered the UDP and TCP as follows:

  TCP: 80, 443, 3478, 3479, 3480

  UDP: 3478, 3479

  But next to the TCP, I get the message "the port entered already mapping entry exists."

  I have no idea what to do and I try just to port before my PS4 and then do the same thing with my Vita to get a better connection outside my house when connected to remote play.

  Any help would be greatly appreciated.

  Danny

  Ports can be transferred only once. If you cannot transfer the same ports in both PS4 and Vita.

  A port can already be assigned by the system (System automatic Apple equivalent to upnp) NAT - PMP and then, he will refuse to allow manual port forward.

  Try just to restart AE... then, simply using the computer... Let all the rest off... do your redirection of port... case of failure of this nature... factory reset the AE and do as part of the initial installation.

  Tesserax has a thing... but you seem to have this right.

  PS3/4 Type 1 NAT (Apple routers)

• Firefox automatically adds the port number in the address bar when it is not.

  I work for an ISP company that implements regular routers for a customer locations. One of the things I need to change about it is to assign the management port 8080. For example, 192.168.0.1:8080. Once I try to install a new router that Firefox automatically assume I want to go to the same port 8080 and automatically concludes for me. Since the new router has not been configured with the 8080, yet I can't. So basically I would like to see if I can stop Firefox automatically enter this bit of information. It is very annoying and even more annoying that I have to use another browser to make changes since Firefox can not. I found a similar fix posted when Firefox will automatically ".www" but which did not fix my problem.

  Disable the URL bar auto-complete feature. You can always select an address already used by the arrows down on the drop-down list of AutoComplete, but Firefox won't add characters to the URL as you type. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search box that appears above the list, type or paste the filling and make a break while the list is filtered

  (3) double-click the browser.urlbar.autoFill preference to change its value from true to false.

  Who help me?

• 4 FC by FI uplink ports. But what a single port to send the addresses of WWPN vHBA?

  I have four portis configures as uplink FC by FI and FI woking in end host mode.

  I have 24 blades using two vHBA. vHBA0 and vHBA1.

  24 address WWPN are saved on the uplink of SAN of only 1 FC uplink.

  Same case in the other Brocade.

  That is something we don't want.

  All FC uplink ports must be used.

  We have borcade. Advised not to use the port channel.

  I can manually create groups of pin code and balance the load. But do create a lot of model vHBA and tedious work.

  Other autour work?

  Help, please.

  (1) you can only use Port FC channels connecting to Cisco MDS and Nexus or for FC traffic.

  (2) on each FI, run the following command:

  (nxos) # see the npv flogi-table

  You should see the WWPN by connecting to the FIs, or you have problems downstream with your configs vHBA.

  Make sure that vHBA0 is mapped to FI - A and vHBA1 is mapped to FI - B and the proper vSAN is assigned to the vHBAs. Also ensure that the FC connections are not crossed the FIS for the brocades.

  model vHBA allows very simple, consistent deployments.

• Thin client JDBC - IP source address

  I see the program in session $ v as JDBC Thin Client.  I need to know where the connections are coming from (source ip address).

  I reason to assume that the only way I'll be able to see who is not in the views v$ but traces of sqlnet server-side to activate?

  Thank you

  Jacqueline wrote:

  Hey, thanks for the replies. It is a database 10g running in a RAC 11g cluster.

  Yes this is level 3 - end user connects from browser to the Web site, site Web running java code (or maybe the browser activates a java applet, although I doubt that - I don't know the complete development environment) and connects to the db via jdbc client light.

  I see some server names, in v$ session.machine - probably that they are web servers, so maybe that's all I'm going to (same as IP really as they are internal servers)-as for the end user, I expect that they will have to use for this httpd logs

  Thanks a lot for helping me to focus on this

  If you wish / expect end user IP #, then the application MUST be modified & WEBSERVER must participate to get & send the IP # of the end-user; because the WEB server is the only device that is in direct contact with the end user.

• ACC + ports RTMFP and IP address/host name

  Hey guys,.

  Where can I get the ports + IP addresses that we must have open order to use RTMFP + CAC services?

  I found:

  http://forums.Adobe.com/thread/583118 which seems to be related because of talking about ports RTMFP

  http://www.IANA.org/assignments/port-numbers -1935 port that you have registered with IANA

  http://kb2.Adobe.com/CPS/164/tn_16499.html -FMS using1935

  http://help.Adobe.com/en_US/flashmediaserver/configadmin/WSdb9a8c2ed4c02d261d76cb3412a40a4 90be - 8000.html -more information about the ports

  http://allthingsadobeconnect.blogspot.com/2011/02/what-is-list-of-IP-addresses-for.html One of your listed partmers host names addresses/IP, which is another piece of info, I am looking

  http://learn.Adobe.com/wiki/display/LCCs/LiveCycle+collaboration+service - nothing here?  :/

  Y at - it an official doc for this type of info or if some can validate the following:

  (1) must have ports 80 (RTMP), 443 (RTMPS) and 1935 (RTMFP - tcp + udp); However, once the application connects on port 1935 he will be redirected to any port between 19350-65535.

  (2) the fms *. na.acrobat.com ip address will always be in the:

  209.34.68.0/24 subnet
  

  66.235.155.0/24 subnet

  Thank you

  Alex G.

  Sorry, I thought I responded to this the other day. Not sure what will happen to my post.

  In any case, it is a list of the ports used by FMS in LCC:

  -tcp 443 for rtmps (rtmp over SSL)

  -udp 1935 for rtmfp

  -udp 19350 19400 (I need to check the upper limit): FMS listening on udp 1935 for the incoming connection, and then redirects the request to one of those (not sure of the details for doing this, but we have to configure our firewall to have these incoming ports open).

  So in order to properly connect to ACC via RTMFP you must allow UDP traffic and outbound connections in 1935 and 19350-around the top.

  You also want to tcp open 443 (which you should already have) to access the services web and downgrade to rtmps for recording and/or if a customer so requires.

  Let us know if this information is sufficient or if you need more details. Because we rely on FMS, the best place to search for documents would be for FMS 4.x reference documentation. Here is a link that explains the configuration for the RTFMP support server-side. The customer should have the same set of ports (outgoing destination):

  http://help.Adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2925 e64 - 7fd2.html

  This link else explain how to configure a proxy TOWER if you want to limit access to UDP outbound-only Flash clients:

  http://www.Adobe.com/devnet/flashplayer/articles/rtmfp_cirrus_app.html (refer to the "path of firewall" section)

• Redirect based on IP source address?

  I have a site I don't want our competitors to see! By tracking code, I managed to get their source IP addresses.
  
  After looking around, there is a solution to my problem of .php but my host is not well suited to the .php files (even if it's a treatment).
  
  My pages are in .shtml (to deal with the drop-down menus css correctly) and I understand that this attachment code, if put at the top of the page before anything, will work.
  
  I managed to get a http://www.donbur.co.uk/gb/newindex.php job, but finds it difficult to get this code to work elsewhere.
  
  The problem is, when I try to put this code in one or other model as an inclusion, it won't process correctly or page will not be displayed at all.
  
  I have to use the .php files or add in a .shtml document php script.
  
  Really confused now... Help

  Thanks for the constructive advice...

  Quote:

  > After looking around, there is a solution to my problem of .php but my host is not well
  > suitable for .php files (even if it's a treatment).

  What does that mean? Your hosting plan includes php support it or not?

  You can not just put a php script on any page. It must be a .php page, or you will need to reconfigure the server to analyze the other pages for php. But if your hosting plan does not support php then it will not work in all cases.

  My host is BT Internet and they claim not to treat the .php files that's why our site main .php is hosted elsewhere; However, it seems that, even if it's hard (to clarify: don't) with main complete scripts, it does not seem to treat simple

  It was suggested on another forum that the .shtml files are set to be recognized by .php in the cpanel, but our host will not do that...

  Our competitors are not particularly intelligent or up to date and it was pretty effective; However, I am inclined to the best judgement and close this topic.