Smart battery case pricing questions

Similar Questions

• Smart battery case

  Will be the case for smart battery that I use on iphone 6s function on iphone 7?

  It will work, but you will need to take the phone from the case, whenever you want to use as a camera.

  https://9to5Mac.com/2016/09/21/iPhone-7-smart-battery-case-smart-pricey-ugly-big ger-battery-video /? Pushup = 1

• Smart battery case overload?

  I have a 6 s and I wonder if the case will my iPhone to overload and break it. Thank you!

  RussellACoyne wrote:

  I have a 6 s and I wonder if the case will my iPhone to overload and break it. Thank you!

  No, it won't. She stops to charge the phone when the battery reaches full.

• Smart battery from Apple case

  Hello to the community.

  I recently bought an original case of smart battery and I'm confused about the operation.

  It seems first using the case and when it is empty it begins to use the Iphone's battery.

  It is the feature as it was designed. But it would not damage the battery business over time because it remains for 2-3 days at 0%?

  All the Iphone battery care tips say to not let a battery the lithium discharged for a long time.

  So in mode I can survive with the phone battery only 3 days. Meanwhile, if I reload, the matter remains completely empty.

  He shorten the live time of the smart battery case?

  I want more discharge mode where the two batteries used simultaneously or at least the option to choose between modes

  Most all the external battery packs have electronics that stop her before she reaches completely from scratch. I don't worry about this.

• Apple Smart Battery box

  Hey I have a question about my Smart Battery case I noticed while using the phone in the case when both are charged at 100% the phone empties slowly, even if it is connected to the case which empties as well I would be 100 percent in the phone but would increase gradually to 99% to 98% etc while the phone is supposed to be in charge in the case. but when I do not use the phone and its in my pocket or sit on a table or a desk, the battery remains on 100 percent on the phone and the case until he exhausts which is how it is supposed to work, but I think it's usual life drains real phones battery while using the phone for music Facebook I reload message email etc even if his charge of the case is this normal behavior

  Thank you

  This support document examines the case of smart battery. Charge your iPhone with your Smart - box Apple Support

  It is not included, but I remember reading more on somewhere else, and it seems that when you use the phone, it uses the phone's battery and the case will charge the phone when you stop using the device, like the day before. I don't think it requires the device while using it. According to the document of support, you should see the status of the two batteries of the lock screen and the use of intensive applications on the phone to increase charge time. I'll try to find where I read that, but encounter difficulties right now. I'll post again if I find it.

• Apple phone battery case battery draining first

  I have a smart battery case from apple when my iPhone and the case are too charged 100 percent during the use of the term be in the case I have noticed my phones battery (not the case) seems to pass before cases for example when case is on 100 percent after using the phone or the battery of phon 10 mins will 99 and 98 etc I was wondering is - it normal that I had an and brought back thinking that it was a faulty case but noting the same issue

  aanyone else having this experience

  I think it's supposed to happen. It allows to maximize the total time that you get both the case and phone batteries. iPhones relatively quickly load up to about 80% and charge time then slows down. The case would consume more energy if she tried to charge your phone above 80%. I do not use the case myself, or product information tells you when exactly it starts to charge your phone, so I can't give you specific numbers as to when it will start to charge your phone, but it should at some point, probably very less than 80%.

• photo iOS 10 face recognition does not not with smart battery from apple on the iPhone case 6

  Hello

  After upgrading my iPhone 6 with smart box Apple iOS 10, I tried the new feature recognition of person of photo enforcement.

  He asked me to connect the phone to the power outlet and lock the screen. I connected my case smart battery with the iPhone in to the charger and waited at least 10 minutes. IPhone person kept asking me to connect to the socket and lock screen battery icon showing that the phone is charging and the case of the battery to 100%.

  As I withdrew my iPhone from the record, plugged directly into the outlet and locked to the screen, picture began to go in my photos.

  Anyone else with the same problem?

  If there is a bug where should I report it?

  Kind regards

  Xavier

  It is a Bug, but I think that if you have agreed to share your Apple device status information, they already know the problem

• DAMAGE SMARTE BATTERY AND IPHONE BATTERY CASE

  Don't damage case smart battery the battery of the iPhone because it's over it load when both are a load of 100%?

  No, an iPhone or ANY device powered by batteries Apple, are increasingly unable to load. The devices themselves regulate their own charge cycles and will stop when the battery's load capacity. They can no longer charge, period.

  ALL Apple products conform to the standards of SMART international lithium battery explicitly include the requirement that all these devices have built in protection fees.

  When the battery of the iPhone itself is 100% he treats the case of battery even as it would any other external power source. Loading stops and the unit runs the external power source.  If the box is connected to a power adapter, then it stops too much load to 100% and must simply acts as a passage of connection for external power to the iPhone.

• Smart battery business effects on the phone battery?

  Hello

  What is your contribution regarding the effects of the case continually recharges the phone?

  First of all, I'm confused that the case feeds the case when the phone is 100% or if it is just trickle charge the phone and keep it 100%. I read a few articles such as (http://fortune.com/2015/12/14/apple-iphone-battery-case-review/) saying that the case battery fully powers the phone. However, I have reason to believe that the case is simply trickle charge the phone.

  If the case was simply charging the phone on charge of compensation, he would have no adverse effects on the long-term phone battery? As (http://www.powerstream.com/li.htm) and (http://batteryuniversity.com/learn/article/charging_lithium_ion_batteries) does point out that trickle charge a Li-ion battery can have negative effects on the battery. I much prefer fresh case of how Mophie battery, I can turn it on when I want to and end it before 100%, but I prefer by far holding the handle of the smart case in my hands.

  The management of the battery of the phone is very smart. When the battery reaches 100%, it stops to load. Completely. When the phone is 100% power is connected powering the phone, and the battery is ignored. If you could leave it plugged into the wall for weeks without interruption, and it wouldn't hurt anything. In fact, you SHOULD leave plugged in overnight, every night and allow automatic backups iTunes via WiFi or iCloud. In this way the most you can lose is a day data.

  As a result, the case feeds the phone up to exhausts its battery, then the battery takes over. If the battery is not fully charged when you connect the case he will first charge the battery.

• The case of smart battery overload my 6s

  When my 6s is connected and fully charged to 100% in the case of smart, there is always a logo brightening. This means that the case is permanently supported my 6 s? Or using the battery of the case? Could adversely affect the battery of my iPhone?

  When you use your phone, it will not charge your phone. As soon as you stop using it, it will reload your phone upwards.

• To maximize independence, should I fully charge my case smart battery before the first use?

  I just got my smart box and I'm looking for advice on maximizing its battery life/performance.  Instructions for my iphone says to fully charge the phone prior to activation, but I heard that it is better to let the battery drain completely before recharging.  Suggestions?

  Instructions for my iPhone says to charge the phone before activation

  It's just to ensure that you don't miss power while activating.

  but I heard that it is better to let the battery drain completely before recharging.

  It is the case for nickel-cadmium batteries, but not for the batteries the lithium in the iPhone.  Load them when you want.  It is not good to let them go completely dead unnecessarily.

• Smart battery from Apple box 'question '.

  I bought one for a few months and it was really useful, but in the last few days when I want to load gaves the orange me sign and after 5 seconds it already disconnected and it keeps doing this for all the time and it does not load... I need help immediately.

  Hello

  The Apple Smart case is covered by the limited warranty for one year from Apple.

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation so that the product controlled:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Sony Smart SCR42 case - how to use it?

  Where I can get information on how to use my smart case.

  Or who? can tell me an explanation for using it.

  Hi JVC,.

  Welcome to the community,

  You can always contact the customer within your region for the support service as well.

  Use my signature below for contact information.

• Smart battery life 2 band

  My smart group only charges to 94% and lasts for only 2 days. Since I got on Wednesday it is been debited twice. My old sw1 would last 5 days. A little dissatisfied.
  All parameters are the same as sw1 outside heart monitor being active (the reason for the upgrade)
  I'm not currently using stamina mode.
  A few tips to maximize the prosecution and to last more then 2 days without stop the characteristics of the band?

  Yes, always load until the small LED turns off. I didn't know this at the beginning, but a few days ago the light and I guess it has reached State full. To extend the life of the battery, try to use it in normal mode and not heart rate monitor. Also, avoid having the two notifications and call about this if possible also of many notifications from facebook, google, mail etc. will reduce the battery life. I've had a life of maximum 3 days on this subject, the normal mode.

• Smart title case - problem with script

  Having a problem here.

  When multiple paragraphs are selected the start of a paragraph has a tiny

  How can I fix?

  //DESCRIPTION: Converts selected text to title case smartly
  
  
  var ignoreWords = ["a", "an", "and", "the", "to", "with", "in", "on", "as", "of", "or", "at", "into", "that",
           "by", "from", "their", "then", "for", "are", "not","cannot", "be", "is", "which", "can"];
  var intCaps = ["PineRidge","InDesign","NJ","UMC", "FCCLA", "SkillsUSA", "d’Oeuvres", "VAT", "VIES",];
  
  // or by creating text files named ignoreWords.txt and intCaps.txt in the same folder as the script
  
  ignoreWords = getIgnoreFile(ignoreWords);
  intCaps = getIntCaps(intCaps);
  
  try {
      myText = app.selection[0].texts[0].contents;
  } catch(e) {
      exit();
  }
  
  theWordRanges = myText.split("/");
  for (var i = theWordRanges.length - 1; i >= 0; i--) {
      theWords = theWordRanges[i].toLowerCase().split(" ");
  
      //First word must have a cap, but might have an internal cap
  
      myNewText = "";
      for (var j = 0; theWords.length > j; j++) {
          k = isIn(intCaps,theWords[j])
          if (k > -1) {
              myNewText = myNewText + intCaps[k] + " ";
              continue;
          } else {
              if ((isIn(ignoreWords,theWords[j]) > -1) && (j != 0)) {
                  myNewText = myNewText + theWords[j] + " ";
              } else {
                  myNewText = myNewText + InitCap(theWords[j]) + " ";
              }
          }
      }
      theWordRanges[i] = myNewText.substring(0,myNewText.length - 1)
  }
  app.selection[0].texts[0].contents = theWordRanges.join("/");
  
  // +++++++ Functions Start Here +++++++++++++++++++++++
  
  function getIgnoreFile(theWords) {
      var myFile = File(File(getScriptPath()).parent.fsName + "/ignoreWords.txt");
      if (!myFile.exists) { return theWords }
      // File exists, so use it instead
      myFile.open("r");
      var importedWords = myFile.read();
      myFile.close();
      return importedWords.split("\n"); // Could filter these, but what's the point?
  }
  
  function getIntCaps(theWords) {
      var myFile = File(File(getScriptPath()).parent.fsName + "/intCaps.txt");
      if (!myFile.exists) { return theWords }
      // File exists, so use it instead
      myFile.open("r");
      var importedWords = myFile.read();
      myFile.close();
      return importedWords.split("\n"); // Could filter these, but what's the point?
  }
  
  function getScriptPath() {
      // This function returns the path to the active script, even when running ESTK
      try { 
          return app.activeScript; 
      } catch(e) { 
          return e.fileName; 
      }
  }
  
  function isIn(aList,aWord) {
      for (var i = 0; aList.length > i; i++) {
          if (aList[i].toLowerCase() == aWord) {
              return i;
          }
      }
      return -1;
  }
  
  function InitCap(aWord) {
      if (aWord.length == 1) {
          return (aWord.toUpperCase());
      }
      return (aWord.substr(0,1).toUpperCase() + aWord.substring(1,aWord.length))
  }
  

  Hello

  Looks like it is a problem of "paragraph mark" which can be considered as 1 char in some channels.

  change these two lines:

  ...

  theWordRanges = myText.split ("\r");

  ...

  App.Selection [0] .texts [0] .silence = theWordRanges.join("\r");

  ...

  Jarek