Smart blackBerry phones CONNECT to the INTERNET using WI - FI

Similar Questions

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• connection to the internet using time capsule

  I have problems connecting to the internet using time capsule. It detects my wireless network but will not connect to internet. I run ipconfig/all and it comes up with media disconnected. If I put any security on my wireless network, it finds the network and go on the internet with no problems.

  Thanks for the help in advance

  Hello Pudgex76,

  I suggest looking on the forums of Apple for more information if necessary:
  http://www.Apple.com/support/TimeMachine/

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• After the HP update cannot connect to the Internet using my ISP wireless

  I have a HP Pavillion15 Notebook PC, Prod #: E7C83AV using Windows 8. Hp yesterday made an update, and subsequently, my computer does not connect to the Internet, using the same network wireless ISP.  Only way I can get Internet is to use the DSL unit to the computer USB cord.  I had a "Configuration for Invalid IP (106)"

  My ISP is still in my system with the same password, and I can't find any reason why it does not connect.  I have all the correct lights on my computer & the DSL unit.  I have not contacted my ISP, do not know what to say "After HP did an update, your service will not work?"

  Tonight I tried to get help from HP, big whoopie, even when I'm in warranty for 9 months, I was transferred to HP/SmartFriends, who told me that I had to pay for the assistance.  It won't happen!

  I don't know what to do now, I'm not very computer savvy and if HP won't help, do not know where to turn now.

  I'm fighting mad now!

  Someone please help.

  Have you tried to restore to previous work image?

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Using HP ePrint mobile phone connected to the internet

  Hello, I have a strange problem.

  I have a printer HP Officejet 4630 e-all-in-one and I want to configure HP ePrint.

  I have the internet connection for my laptop, which is the computer that I use. It is also a HP. To set up your account to HP ePrint you need code number of the printer that can be printed from the printer control panel. Once you have the code for the printer, you can then go into your account to add your device. My problem is that my interent connection is the mobile phone that I use to connect my laptop to the internet. Then, the printer is connected to the computer using either the direct wireless feature or by using the supplied USB cable. For this reason, I can't get the code to the printer, the control panel of the printer. I use fixed internet connection, as the mobile phone is used as a modem.

  What should I do?

  Can I just phone technical support and ask them to send my printer code?

  ADSL ethernet cable must be physically connected to the printer in the same wasy as you would with an internet connection for your computer? If this is the case, I must connect the mobile phone to the printer using the wifi, which I think is possible - to my knowledge.

  Banhien, is that correct?

• Smartphone blackBerry, connection to the internet using bluetooth

  Hello

  I have a laptop pro running with a Blackberry 8900 OS 10.6.2. I have the system of preferences under bluetooth DUN seller Motion with blackberry option IP Modem (CDMA) according to model, I chose research. The laptop can connect to the phone, but does not connect to the internet, any suggestions?

  Thank you

  Lambert

  Hello
  Just to keep everyone updated, I managed to make it work. I had to download a modemscript for the 8100. I set both of phone number * 99 #, user name and password for comments.

  Thanks for the support

  Lambert

• Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

  Hi all

  Mine is an edition of Satellite L20.
  I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

  Since there is no bluetooth built into my laptop.
  So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

  Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

  I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
  1) send to microsoft
  Including 2) send.

  What can we do to fix this problem?

  No idea...?

  See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

• Re: Satellite Pro L670-103 - not able to connect to the internet using LAN

  Hello

  I am unable to get my L670-103, in the case of Windows 7 Pro (x 64), to connect to the internet via the ethernet jack.

  I tried running the troubleshooter in windows and reinstall the driver ethernet with no luck.
  The computer used to work fine with the same network (I have no control on the network itself, as I'm on a University campus), and my other, much more old laptop (with XP), connects with no bother.

  I'm sure the question is focused on software that - I tried to go online on the same socket after booting from an Ubuntu live CD, and it worked fine.

  What can I do about it?

  Hello

  Can you confirm that the LAN driver was installed successfully?
  What is card LAN recognized correctly in Device Manager?

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s