Smart translator bought on Apple Store does not work after upgrade to El Capitan

Similar Questions

• App Store does not work after upgrade to 10.11.2

  Hi guys,.

  A day after Mac OS X El Capitan 10.11.2 came out, I installed in on my MacBook Pro 15 "retina mid-2014. After you install the updated AppStore has stopped working.

  I see that some update is available (both of badge on AppStore icon and label "1 update" icon in the Apple close menu 'App Store' menu), I am able to run applications AppStore without any problem, asked a password for AppStore at some point, but when I run AppStore, what I see is an empty window with a toolbar , logo of the AppStore in the middle and a cone running right beside 'back' and 'forward' buttons on the left side of the toolbar. It does not matter what section of the toolbar, I chose (featured, Top Charts, categories, purchased or updates), nothing happens, spinner is continue to run and does not stop after doing that again for hours.

  Is that what someone has any ideas what it could be and how I can get my AppStore rerun?

  Thank you!

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  Sometimes, the cause of the problem may be an Apple network, whereby failure cases none of the steps below will have no effect. You just have to wait for the failure be fixed. This should rarely, if ever, take more than a few hours.

  Step 1

  Connect to the App Store by selecting Sign In in the Store menu. If you are already connected, disconnect and then reconnect.

  Step 2

  Log off or restart the computer.

  Step 3

  Remove or disable 'LittleSnitch' or any other third party software like that blocks outbound connections to network in accordance with the instructions of the developer.

  Step 4

  Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  After testing, restart as usual (not in safe mode).

  Step 5

  If possible, connect to a different network and test.

  Step 6

  Reset the NVRAM.

• My scanner does not work after upgrade to El Capitan

  I got the upgrade to El Capitan 10.11.3 OX and since then my scanner epson XP-600 does not work.

  I have installed all updates for updated epson software. The printer is cause of work (I have them all in one), but not the scanner.

  I tried to do what other users have suggested as TWAIN devices reset but when I go to the Image Capture this choice is not given to me.

  I am totally disappointed with El Capitan, he even caused problems with my emails.

  Could someone please help since I'm on this scanner for businesses?

  Thanks in advance

  Apple is not responsible for ensuring that Epson provides scan to update drivers.  Epson is responsible for the update of their drivers and providing them to Apple, or publish them on their website.  Looks like the last update for the drivers scanner was on 09/07/2015 (http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=201987&infoType=Dow nloads & platform = OSF_M_X11).  The scanner is listed in system preferences/printer & Scanners.  I know that the printer is listed, but the scanner function is?

• CURL does not work after upgrade to El Capitan

  I get this error message when you try to run the curvature of the Terminal command line:

  / usr/local/bin/curl: line 61: / usr/local/bin/sed: no such file or directory

  / usr/local/bin/curl: line 65: / usr/local/bin/sed: no such file or directory

  / usr/local/bin/curl: error: ' / Users/xxxxx/.libs/curl' does not exist

  This script is simply a wrapper for curl.

  CURL, used to work on Yosemite, but it's been a while since I used it.  Any help in fixing this error would be greatly appreciated.

  I tried to use the loops provided by AMPPS download and change my path to hit this curve first. Curl works but then has problems with all certificates of sites. Tried to download the http://curl.haxx.se/docs/sslcerts.html cacerts file, and specified the file but still the same problems.

  I really need curl in any form. Thank you in advance.

  Hello xten.

  Curl and sed are part of the operating system. Since you've installed custom versions and hacked your way to use, then you will understand what has happened there and fix it.

• CC of Lightroom does not work after upgrade of El Capitan

  Hi-

  I just upgraded to El Capitan & Lightroom CC will not start. I tried the removal & re - install but still not working - any ideas anyone?

  After 2 hours on the phone with the two Apple & Adobe (being struck between the 2!), obviously, the problem was my user profile, despite deleting cache files & plist yet there didn't work, so the spend some time setting to new user account - NOT HAPPY!

• Brother MFC 7820N does not work after upgrade to El Capitan

  I installed my OS to El Capitan. My multifunction Brother MFC 7820N printer was working perfectly before the upgrade. Now, I get an error message indicating that the printer is not connected, even though it is. He is unresponsive to the print command, and I can't find new compatible drivers on the Brother site. Any suggestions?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

  You may be able to find a driver here.

  Gimp - Print

  HPIJS for Mac OS X

• Scrabble for mac does not work after upgrade of El Capitan

  I don't want to go back to the old operating system.  Happy to buy the new game so I knew that it would work on El Cap

  The developer of the app what you say when contacts you?

• Adobe Air does not work after upgrade to El capitan 10.11.2

  All other witih this problem?

  Maybe this discussion on the adobe site has an answer-> https://forums.adobe.com/thread/1874230?start=0&tstart=0

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Apple pencil does not work after update to iOS 9.3.4?

  My Apple pencil does not work after installing iOS 9.3.4, I tried to forget this device and it Peel again. No change, it still fails. Any fix for that?

  Never mind y ' All, I reset my iPad Pro and all works fine now. Weird, but as long as it works all is good

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582