Smart Watch 3 disconnects frequently smartphone Xperia Z2

Hi all

I have s Sony Smart Watch 3 connected with a smartphone Sony Xperia Z2. It seems that 50% of the time I need to use it, my watch shows that he is "disconnected" (the small icon of cloud with a bar above it) and cannot get the results I'm looking for. My phone is never greater than 0.5 feet away from me.

At first, I suspected that this was due to the power of Stamina economy mode on my smartphone that cut the Bluetooth / NFC connection when the phone is locked. Therefore, I turned everything power disable saving features, but always get the same question.

I tried restarting both devices, unpairing, them and their team again from scratch, nothing done.

Can someone help me solve this problem? My watch be useless if I can't make it work reliably.

Thank you

/ Enja_Ino

My first thoughts were endurance mode that I had this problem, for the neutralization of him I didn't a problem unless I move out of reach, so I am at a loss outside of drastic as measures making a factory full reset of watchmaking and the phone, and if the problem still persists , and then either return your original place of purchase or contact Xperia care http://www.sonymobile.com/global-en/support/contact-us/

Tags: Sony Smart

Similar Questions

  • Smart Watch SW3 compatibility

    SW3 smart watch can only use with my Xperia S. I know that the experience will be less. But it is quite inconsistent, or it can work. ???

    No, SW3 needs Android 4.3 and Xperia S got only 4.1.2.

  • I bought a smart watch GT08 and question is why Apple makes it so difficult to plug anything using Bluetooth?

    GT08 Smart Watch does not connect using the applications in the App Store. Why is this? I use a 4 s.

    And why Apple made things so difficult to connect Bluetooth devices. And again, I bought this watch, but none of the bt applications declaring work. I'm just trying to get my upcoming sms through the watch.

  • HP ENVY m6-ar000 x 360: HP Envy m6-ar000 x 360 Convertible PC Wireless Connection Disconnects frequently

    Hey everybody,

    My PC Convertible HP ENVY m6-ar000 x 360 Wireless disconnects frequently.

    What can I do to fix this?

    Thank you

    Bill

    Hey Bill,.

    Following our normal wireless troubleshooting tool is the best way to solve almost all of the cases, but with this specific model with the AMD processor jump directly to make sure that update BIOS F.06 or most recent would be necessary.

    HP ENVY Ar000 M6 X 360 PC Convertible - WiFi disconnects frequently

    http://support.HP.com/lt-en/document/c05144863

  • Satellite M40x-119: connection WiFi disconnects frequently

    Hello

    I have a portable computer Satellite m40x-119. my wireless disconnects frequently after awhile at each connection. I have a roboticts wireless adsl modem. I don't know what to do or what to download. I will be happy if you can help me.

    with best wishes...

    Rasit Turkmen, istanbul, Turkey.

    Hello Rasit

    First of all, you can try to install the latest driver, you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    By the way: did you test with another router? Is it the same situation?

  • my watch guard disconnect my 5s since the last software update iPhone

    Since the last update my watch guard disconnect from my iPhone.  I turned the phone market.  Turned bluetooth market. It connects temporarily, and then falls down.  both devices are within a few feet of each other.  also the continuous ringing start-up.  are there bugs in the new update?

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Compac presario CQ62 wireless adapter disconnects frequently

    My laptop compac presario CQ62 wireless adapter disconnects frequently while I'm online. y at - it a driver update that will help solve this problem?

    Hello

    Thanks for providing this information.

    I would like that go you to this link: drivers PC laptop Compaq Presario CQ62-421NR. Once here use the "scan now" under the control of the updates. This will scan your laptop all the updates that are available. If you see something that indicates wireless, make sure that this update is complete.

    The other option to do this: go to the Device Manager (start type in search Device Manager), under network adapters, you should see the wireless card. Make a note of it (it must be a brand name) so that you can reply back with it. You can then right click on it and try to update directly from the driver.

    If neither help in updating the wireless, please answer back with card network information. In addition, the operating system that is currently installed on the laptop.

    Thanks for your reply.

  • On Windows XP, 3G modem connection is disconnected frequently

    I bought an Airtel 3 G modem for internet access, the modem is installed properly on Windows XP, but the connection is disconnected frequently to every 5 minutes. Help, please.

    Hi JayTiwari,

    ·         What is the brand and model of the computer?

    ·         You are able to use any other USB device on your computer?

    You try to run the cycle of power from the laptop or desktop computer. Subsequently, check if you are able to use the USB modem on your computer.

    a. disconnect all external devices from the laptop or desktop.

    b. remove the battery from the laptop (only if it's a laptop).

    c. press the power button on the computer laptop or desktop for 10-15 seconds.

    d. Insert the battery in the laptop and restart the computer (only if it's a laptop).

    Hope the helps of information. Please post back and we do know.

  • Internet disconnects frequently in (cable) windows 7

    I connected to the internet through wired Edimax router, I have no problem with the connection on windows 7 more early, recently I have re-installed windows 7 ultimate 32 bit. Now I have the internet disconnects frequently after 10/5 minutes, when I ping (ping t 8.8.8.8) to internet orders connects. ADSL in the modem is on every time while the data or internet light goes on and out. There is no problem so that before reinstalling windows 7. pls help me?

    Hello

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, there is problem with the disconnection of the Internet.

    Reset the network adapter may solve the problem.

    Click on the link below and see if it helps.

    How can I troubleshoot network card?

    Hope this information helps.

    Answer to us if you are having problems with the fall of the Internet connection or any other problem of Windows, and we would be happy to help you.

    Good day!

  • Satellite P50 - MS Bluetooth mouse disconnects frequently

    Hello

    I am owner of a P50 Satellite running Windows 8.1
    I use with it that a Microsoft Sculpt comfort mouse connected via bluetooth

    This mouse works OK with my old computer (running Windows 7) happens

    Since I installed it on the Toshiba, I often have a total mysfunctionnement:
    -The does'nt of the mouse work not at all
    -It is seen in devices and detected as "working properly".

    In this case, the only solution I have is to remove the configuration and pair it again with computers.

    This problem occurs with varying frequency, from 30 seconds to several hours, I noticed that, when the computer is still running, without action on it, the mouse can remain active for hours but, when I use the computer, it most frequently disconnects

    I wonder if this may have to do with the proximity of my smartphone (NExus 4), which has the bluetooth still offshore, but maybe can send waves that disturb bluetooth... but I never had any problems before with the Dell Vostro computer!

    Does anyone have an idea or a solution?

    Concerning

    I m wondering why you did not contact or visit Microsoft support pages or forums to check if this mouse is compatible and if she supports the new Windows 8.1

    You said you have tested this mouse with other mobile and Win 7.
    Well well, Windows 7 isn't Windows 8.1. There are big differences between the system and especially the software and drivers are not fully compatible.

    I found the support of MS Sculpt Comfort Mouse page
    http://www.Microsoft.com/hardware/en-us/d/sculpt-comfort-mouse
    I found the software for iOS, Win 7 and Win 8 but nothing win 8.1

    So probably it s a problem of compatibility between the mouse and the Win 8.1

  • My Apple Watch guard disconnect from my iPhone

    My new Apple Watch (42mm Sport, watch OS 2.0.1), since the first day, was disconnected from my iPhone (6, iOS 9.2).

    Most of the time in the day, it is not connected (with the small red disconnect icon) or it does not show my phone watch notifications. Sometimes even calls are not made to the phone and notifications on the steps on the orientations are not displayed on the watch, even if they are displayed on my iPhone.

    Also, my watch guard pass in airplane mode.

    I re-set the watch to the factory settings and paired with the iPhone twice, without success. My iPhone is still on my pocket with me at any time at the office and at home, so noBluetooth is still on my phone, even though I sometimes turn off WiFi so it does not connect to my office or the trolley.

    Someone has an idea of what could happen?

    Hello

    If you have not already done so, it can help to upgrade your Apple Watch to the latest version of the software (currently watch OS 2.1).

    The software update instructions are available here:

    Update the software on your Apple Watch - Apple Support

    If this does not help, so that--given the steps that you have already tried - I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

    https://www.Apple.com/support/watch/contact/

  • Smart band SWR10 disconnection of the Z3

    Since the upgrade of Lollipop keeps disconnecting my Smart Band.

    Any suggestions?

    Try to erase SmartConnect.

    How to erase data on applications.
    From your home screen

    1. tap the icon of the Application screen.
    2 find and tap Settings > applications.
    3. slide the tab all.
    4. search and tap the application of SmartConnect.
    5 tap Force judgment > clear data.
    6. restart the phone

  • My Sidewinder X 4 guard disconnect frequently

    Separated from this thread.

    Usually my Sidewinder X 4 works perfectly. All keys of Macro/Media work. I use the mouse and keyboard Center 2.0, which works very well too. However, any time I hit caps lock SHIFT NUMLOCK or scroll, the backlight vanishes, keyboard disconnects for about five seconds and then reconnect. None of the lights (for caps/num/scr) are on, ever, even when one of these things is locked.

    I can look at the device disappear in Device Manager when I press one of these three keys and then reappear. I can also open Center of keyboard and mouse and watch it tell me I have no device connected for a few seconds, and then it reappears as if by magic.
    Another oddity, I noticed, is that when I start, I can open the keyboard to the screen without problem, but then after the first time I press one of these three evil keys, on-screen Keyboard won't work again until I restart. This leads me to believe there are a few conflict mapping somewhere (registry, perhaps?) but I'd like to hear from someone else who has had this strange question and maybe understand an easier difficulty before I'll go in there.
    Oh, and it comes to Windows 7 64 bit.

    Hello heraud,.

    Thanks for posting your question on the Forums of community of Microsoft.

    Are also facing the same issue?

    I would like to try the following suggestions and check if the problem persists.

    Method 1:

    Run following hardware and troubleshooting devices and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    If the problem persists, try the following method.

    Method 2:

    Download and install the latest Microsoft, the center of the keyboard and the IntelliType software from the following link.

    http://www.Microsoft.com/hardware/en-CA/d/SideWinder-X4-keyboard

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Call is disconnected frequently Iphone6 with ios 9.3.1

    It seems after I updated my iOS to 9,31. All my calls (incoming /Outing) getting abruptly disconnected in seconds. Indeed one day it happened more than 20 times. I'm missing something in my settings.

    Appreciate your valuable suggestions.

    Kind regards

    Ramesh.D

    Have you tried to reset your iPhone after updating? If not, you can use the following statement. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • WIRELESS disconnects frequently on Mac and iPhone

    Hello

    My Mac Book Air and iPhone 5 disconnects from the network wifi randomly atlas 5 - 6 times a day.

    Check your network connection and reset your router. Restart both devices.

    Also, try to use your MacBook and iPhone with another Wi - Fi network. If everything works well, I recommend to contact your ISP and ask for help.

Maybe you are looking for

  • tab 6 HP slate

    I have a hp slate 6 and another hp slate 7 tabs voice call. both are provided with battery chargers. I want to know if they are inter changeable

  • Can I install a 3rd hard drive (SSD) on my desire to Phoenix 800?

    Hi, I just bought a Phoenix 800-089 wanted and I was wondering if I could use for an another SSD expansion Bay? There are already an SSD installed and do not know if the expansion Bay would allow another? If so, do I need to purchase a support of edi

  • is a store must give you the drive of an operating system if you buy a computer of prestressing

    When you buy a computer with an operating system of microsoft so you receive the disk that was used

  • SX20 camera mounting bracket

    Is the support that comes with the SX20 is available in a separate part, if a customer has lost their?  It's one that uses only adhesives/velcro to mount to the rear & top of the screen directly. I can't find a part number for what it isn't.  If anyo

  • Lumetri does not connect automatically to the LUT

    Hey!I'm using an AE project, I did not start the project. The guy already color classified video. I'm recovering what he was doing. This project was created for the correction of color with Lumetri on AE. The problem is that the entrance READ does no