Smartphone BlackBerry 8700 c Device Manager and does not AT ALL

Similar Questions

• Treo 800w not found in Device Manager and does not connect to ActiveSync

  I just got my Treo 800w and I have ActiveSync it once.  After that, I had a lot of trouble trying to get activesync to say that it was connected to the computer.  After doing some research on Google and help forums looking around, I discovered that the Treo should appear in my device manager when you are connected to the computer.  I went to my device manager and of course, it wasn't there.  After a lot of time trying to make it work, I found that the best thing to do is remove the battery and plug it in again.  Then the computer will find again.

  However, I also learned what was causing my problem and I don't know if it's a windows or a problem of palm, but it is a question.  If you connect a Treo 800w on a WinXP (I don't have Vista so I don't know if this problem exists) and even if you touch it connected the power button on all Windows POPs a message saying a USB device has malfunctioned and will cease to recognize the device.  I then told my wife (the main user of the Treo) to never touch the power button and even less the Treo at all while it is plugged into the computer.

  If this question has already been posted... I'm sorry that I'm not looking for it...

  If you read my entire post it says I already found the solution.  Try all the things you listed didn't work for my problem.  I write only because I believe that it is a bug/problem with palm or windows and the device.  Take the battery, put the battery back in, and reconnect the unit is the only thing that works.

  I also tried to uninstall ActiveSync, reboot, install ActiveSync and the battery... it works too, but it's much faster to just remove the battery then put it back and reconnect the device.

  To answer your other question on ActiveSync Yes, I've got 4.5.

  Message is about: Treo 800w (Sprint)

• I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  I have hp laptop with built in webcam I went to Device Manager and it not on a day it is next day it not

  Hello

  ·         What is the brand and model of your laptop?

  Method 1:

  Try running the fixit from the link next and if it helps: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Try to update the drivers for your webcam and check if it helps: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

• Xbox 360 controller not working not not windows 7 (detected in Device Manager, still does not)

  What I have
  Xbox 360 Wireless Controller (with the cable that allows you to connect it to the photo that is wired)

  This my problem
  I connected the Xbox 360 controller to my pc via the cable, it is detected in Device Manager as 'wireless controller xbox 360 Via play & charge kit.
  In respect of game controller does not appear even when you click advance to selected the device it does not always show upward.
  I tried to use it TI a game it does not at all.
  The rings on the Xbox 360 controller lights when I plug the controller in my pc (even though Device Manager detects a problem with)
  When I press the button the controller guide, it just keeps blinking as if it must be syc (but it connect through a wire that shouldn't happen)

  I tired using different drivers the same problems, I was installed the drivers off Windows 7 support site exactly the same problem...

  I also tried unplugging all the USB devices on my computer and plug the controller Xbox 360 on USB port which are directly mounted on the mother exactly the same problem.

  Up to now NO solution.
  Please help me because I think I got tired of everything I can

  Unfortunately, this won't work.  The Play and Charge kit connects only up to the actual battery.  Still, the controller connects more wireless.

  You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.

• Smartphone blackBerry 8700 c free themes and how to install

  I'm sure I already know how to install themes, but also a clarification I use the Desktop Manager and install themes through application loader right?

  Also where to find free themes. I've been looking around and can't seem to find a.

  You can download them via the Desktop Manager, free themes, I had just google that.

• Smartphones blackBerry eception exception: Application net_rim_medialibraryplayer (291) does not. process is completed

  Hello world

  I'm listening to music with my blackberry 9700, but as soon as I select a title and click on play all crashes and I have to restart the device.

  After indicating my pin code, I get the error message "eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

  What this means and what I can do about it?

  Your help is really appreciated.

  Thank you very much in advance.

  Miriam

  Hi and welcome to the forums!

  "After indicating my pin code, I get the error message" eception exception: Application net_rim_medialibraryplayer (291) does not; process is completed.

  Do you mean your device is password protected, and you enter the "pin" or you

  must enter a PIN in order to listen to a song?

  I guess that your support is on a memory card, if you take it off you have the same error?

  No problem with the ringtones and alerts?

  The first step would be a traction battery as shown below.

  No data will be lost when you do the following: remove the battery while the device is activated.
  Replace after one minute, let the device reboot 10 minutes, see if the problem is corrected. I like to leave the device completely reindex the files.

  If this doesn't solve your problem, try raising the phone in safe mode;

   KB17877 How to start a BlackBerry smartphone in safe mode.

  Check the settings of your media card, if they are correct, reverse them and reset. Then battery pull.

  Use the following settings in the segment of memory of the menu options.
  (options > memory)
  Card support ON
  NONE encryption mode
  Media transfer protocol WE
  WE support mass storage
  Auto enable mass storage support when it is connected TO

  (still in status > scroll to security options > encryption0)

  Make sure of course have no content protection enabled.

  Battery pull what happens?

  If all else fails, I would use the following to verify your card (save the media BEFORE!)
   ' KB14745 ' " Memory card error, please use disk utility control on computer" is displayed on the home screen of the smartphone BlackBerry.

  I've left the best for last, which would be a wipe and charging the device, OS, after a full backup successful device using Desktop Manager.

  Try and see if you can get the following error information:

  KB17215 How to extract information from a BlackBerry smartphone with the Chargers or incorrect command line tool

  And the last would be the device OS reload.

  KB13323 Untrapped exception errors appear on the BlackBerry smartphone

  Let us know how it goes!

  Thank you

  Bifocals

• BlackBerry Smartphones BlackBerry support insists that STV100-1 does not support the China Mobile HK?

  Then I go to Hong Kong right now with my Priv, using a prepaid of China Mobile Hong Kong that I've used with my classic. Noticed that I can not make calls with it so I called BlackBerry charge to open a support case.

  I noticed two things:

  -I am able to receive a 4G signal

  -Whenever I make a call, network goes to no Service. I also can't find any network if the phone is set on 2G or 3G only

  -I can not receive calls, it keeps saying number not reachable, as if the phone was turned off

  -In the phone app, my number is listed as unknown.

  After a lot of troubleshooting with the support rep, she argued that my private does not support the China Mobile HK, which doesn't seem wise. I'm temporarily using the card with a backup of Telus/Koodo G4, while my private does not work, and it works fine.

  Priv STV100-1 supports:

  • FD - LTE 1, 2, 3, 4, 5, 7, 12, 17, 20, 29, 30
  • HSPA + 1, 2, 4, 5/6, 8

  H812 G4 Telus LG support:

  • FD - LTE 2, 4, 5, 7, 12, 17
  • HSPA + 1, 2, 4, 5/6

  China Mobile uses UMTS and LTE 3/7 1/8. This is why don't the Priv actually be MORE supported? I ' n suspect a hardware issue yet I can't seem to convince management of the case.

  Okay, BlackBerry RMAing my device now, so I guess that's it.

• CD/DVD drive no appears in Device Manager and is not opening?

  Hi when I click to open my DVD/CD drive it does not open upward. Or it appears in Device Manager. I unplugged and plugged in I tried to use microsoft fix it. Nothing worked for me.

  Photo of him, not in Device Manager:
  http://i397.Photobucket.com/albums/PP56/nirvanaking95/dvdcddrivenotworking.jpg
  I JUST INSTALL WINDOWS VISTA SINCE WINDOWS 2000 IT HAS WORKED VERY WELL ON THE 2000!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• BlackBerry Smartphones Blackberry Desktop Software 6.0.1 does not not on Win7

  Hello

  I installed the latest version of Blackberry Desktop Software (version 6.0.1) on my laptop that runs Windows 7 (with all latest updates). When I opened the "Desktop Manager", the Desktop Manager it just hangs, does not receive in front of a white screen it shows in the application. I have uninstalled and reinstalled a few times and always does the same thing.

  I cleaned the registry (HKEY_CURRENT_USER\Software\Research to Motion\) after having uninstalled and used CCleaner to clean my system, and the problem still remains.

  Anyone know what could be causing this?

  Thank you

  Hi bifocals

  I reinstalled the operating system and then installed the software blackberry desktop again and its working properly now.

  I also experienced problems with the operating system before reinstalling where I couldn't install win 7 sp1, while he was certainly associated os.

  Thanks for the help.

  Duane

• Smartphones blackBerry eception exception: application net_rim_bb_addressbook_app (250) does not. process is completed

  Hello

  I found this error in my BB8520 "eception exception: application net_rim_bb_addressbook_app (250) does not; process is completed"and I can not save or edit contacts in the phonebook. nothing etinterpretation to reinstall the system to an earlier date. Can you help me please?

  It will work! After doing research, you need to delete programs such as yahoo messenger and Windows live ON your phone. They interfere with the address book (uncaught Exceptions is a program that appears when problems arrive). Another thing you don't use or that is not supported by your version must example from applications of police etc. After you uninstall these restart your phone and you have, no more exceptions. Especially delete yahoo and windows live messenger, otherwise it will not work. I am convinced that it works bc I just did this, then your host in advance. Have a good

• Smartphones blackBerry eception exception: application net_rim_bb_phone_app (49) does not. process is completed

  When I try to add a new contact in my address book nothing happens and I get a message saying eception exception: application net_rim_bb_phone_app (49) does not. process completed some can please help me

  
  

• What was the reason not to open Task Manager and does not stop?

  I work in the Windows 8 operating system, while working if I press ctrl + Alt + Delete I couldn't. Task Manager, and I also tried by right click on the taskbar and open it but I have not opened., then, if I use Alt + F4 or by clicking on power and shutdown., I can't shut down my system. , I only manage to use long press of the button / stop. What was the reason of these complaints?

  Looks like there is a virus, corruption or corruption caused by a previous virus.  Whatever the cause, something is clearly broken. I would try these simple solutions first: http://cmdrkeene.com/quickly-repair-pc-problems

• Windows 7. I add a hard drive not formatted to my computer. He is recognized in the BIOS and Device Manager, but does not appear in windows Explorer. How should I proceed? Advice please.

  Windows 7
  HARD disk: Samsung Spinpoint 250

  Make a right-click on the icon my computer

  Select manage in the 'breath' menu

  In manage, select disk management

  from that, you can then complete implementation, partition and format the new hard drive.

• Smartphone app displays a blank Page and does not load

  My Webworks app installs without problem on the smarthpone.

  When I try to launch it by clicking on its icon, a blank page appears, and it just sits there.

  Nothing else happens.  I only have a web page in the program and it is called index.html.

  It's the first application for me, so maybe it's that I don't get something good in the config file. If someone could help me on this I would really appreciate it.

  Here's what I have in this file:

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "2.0" rim: header = "Streamer" >

  http://www.XXXXXXX.googlesites.com/"email ="[email protected]"> PL

  Streamer

  A streaming radio

  <>committees mode = "auto" / >

  
  onLocalPageLoad = "false" >
  
  

  
  
  

  
  Copyright (c) 2012
  THE SOFTWARE IS PROVIDED "AS WHAT ', WITHOUT WARRANTY OF ANY KIND,.
  EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE WARRANTIES OF
  MERCHANTABILITY, FITNESS HAS A PARTICULAR PURPOSE AND
  ABSENCE OF COUNTERFEIT. IN ANY CASE, THE AUTHORS OR COPYRIGHT HOLDERS
  BE RESPONSIBLE FOR ANY CLAIM, DAMAGE OR OTHER RESPONSIBILITY, THAT IN A
  ACTION OF CONTRACT, INSULT OR OTHERWISE, ARISING FROM, OUT WHERE IN
  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER TRANSACTIONS IN THE
  SOFTWARE.
  

  I finally managed to do come. Don't know what the problem was, however.

• Emails of New Smartphones blackBerry with rules ordering specific folders does not download

  I just got my BB through the company and we have problems of implementation of e-mail. The company has a BES server and uses the Outlook of business e-mail. The problems are with the download of e-mail that has been redirected by a rule in Outlook to a folder inside the Inbox.

  So far, I loaded the Blackberry Desktop and configured the setting of e-mail on the Advanced tab to redirect the files sampled and selected all records. I double checked the settings in the tab options and are stored on the device. I still do not receive e-mail if the address has a rule to one folder other than the Inbox.

  I am sure there is a setting somewhere, but have not found.

  Help!

  Thanks in advance,

  By default, a BlackBerry will reconcile only (DON'T Synchronize) with the Inbox.  You must enable the Folder Redirection for each folder that you want to be able to see email coming in on your BlackBerry.

  1. From the home screen, go to Messages, then click on the [Menu] (button to the left of the trackball) button or scroll wheel , and then select Options--> e-mail settings.
  2. On the e-mail settings screen, click on the scroll wheel or [Menu] button and select The Folder Redirection.
  3. Top of the screen, you will see your mailbox with a + to the left of it.  With your mailbox highlighted, click on the wheel or the [Menu] button and select expand.
  4. You should now see all e-mail folders in your mailbox, including your Inbox.  Note that the checkbox to the left of the Inbox is verified or filled (depending on your operating system and the theme).  This indicates that the BES server redirects email arriving in this folder to your BlackBerry.
  5. Subfolders located under a folder that you see are indicated by a + to the left of the folder.  Select the line and Expand (see above) to display subfolders.
  6. Any redirected folder will be a box filled or enabled to the left of it.  To activate the redirection of a folder which is not filled or saved, highlight the line of the file and press [space]
  7. When you are finished, [Esc] (button to the right of the trackball) or the button below the scroll wheel and select Save.

  Further, mail arriving in checked or completed records now appears in the list of Messages.  You will notice that the icon of these emails is a folder instead of an envelope.

  As suggested above, you will not see ANY e-mail that has already been received in your mailbox on your BlackBerry.  This is because the BlackBerry is not sync, but rather sends an e-mail once and then follows the changes in the status of messages.  To get any email on your BlackBerry, simply send to yourself of your e-mail application.