Smartphones blackBerry BUG: camera does not work when the lamp is on

BlackBerry PRIV model STV100-1
AAE016 (aospl-msm8992 69 qc8992_sfi-user output software version
Android version 5.1.1
Last updated on 1st March.

Previous version of the software had the same problem and can be reproduced like this:

(1) to any application other than the camera, drag down twice from the top and turn on the flashlight.
2) press the squarre and switch to the camera application, which says now: "camera not available."
3) slide down twice, turn off the flashlight and switch camera to the photo app, now there is no message, but the camera still does not work.

(4) use the table to any other application, then the table to return to the camera application, which now works fine now that the lamp is off.

If you attempt to try the above, when you are in the camera app, once you drag down twice, there is no icon to turn the flashlight.

Advertisement

Hmm, that's an interesting and scary use case, please provide

Someone else see this thread, if you want this functionality please like this post to express interest

Tags: BlackBerry for Android

Similar Questions

  • BlackBerry Smartphones Blackberry Internet Service does not work because of alleged network problem

    Service provider changed APN on cellular network of 'internet' to 'without limitation' and since then, BIS does not work and the host Routing Tables are empty. The AFN was changed no doubt, but still not BIS. Changing TCP/IP settings had also no effect. Service provider has now said that RIM should fix things, one server RIM and asked this, but it doesn't seem to be any progress and whenever I call customer service, I have to explain the whole story. Swopper SIM with another phone with works by BIS, so the phone itself is very good. Any suggestions on how to fix this?

    It is now almost a month and there is simply no progress to solve the problem. I was told that RIM would contact me directly, what has not happened. Should I cancel BIS on that number and activate it on another?

    This seems unnecessary, but may be the only solution?

    Hi all, the problem was solved today by a brilliant person who found the AFN is not correctly set up - after so! many technical support confirms that it was fine.  I guess it may have as some misspellings that are so obvious, you can just find them. After more than a month, I'm just relievd and grateful!

  • Download the file and the camera does not work in the job profile

    Do we need special permissions an app to work in the profile of work, we developed a webworks app, and when we tested on personal profile, it works very well in all the devices (Q10, Z10 and Q5).

    but the same application does not work on the work profile.

    We gave all the permissions in the configuration file.


    <>ermissions >
    <>Ermit > access_sharedermit >
    <>Ermit > use_cameraermit >
    ermissions >

    Work profile

    (1) it is not able to download the file.

    2 camera) is not running themselves.

    can someone help me in this please.

    concerning

    Mudassir Mir

    Working profile doesn't have access to the shared folder, and there is no camera installed by default application.

    The camera problem, you can work around by deploying a replacement of the camera to work partition. There is one called CloudyPics we offer open source that works: https://github.com/blackberry/Cascades-Community-Samples/tree/master/CloudyPics

  • Camileo P30 does not work when the 8 GB SDHC card is inserted

    Hello
    I just got a new camcorder Camileo P30.
    I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
    And it does not work with the card inserted.

    Here are the symptoms:
    (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
    (2) when the card is inserted, the following occurs:
    2.1) I can't take pictures or video - it does not meet the pressed buttons.
    2.2) I can't access menus.
    2.3) I can't shut off again.
    2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
    (3) I have tried different combinations of:
    3.1) Insert the card so that the camera is turned off.
    3.2) Insert the card so that the camera is turned on
    3.3) Insert the card while the device is switched on and in one of the menus.
    (4) the camera doesn't always work if I take the card again.

    During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
    At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

    Note to work around the #2.3 I took the battery.

    I was not yet looking for updated firmware, or connect it to the PC.

    Has anyone of you has met with such a problem?
    What did you do to solve it?

    Thank you.

    Hello

    Have you tried another card SDHC?
    I m not very well what is happening here, but I recommend you another card in this camcorder.
    I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

  • normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

    after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

    but when open video camera flash is working and also with any another application to camera is working normally

    How can fix this?

    reset the camera settings after Flash open ligt

  • BlackBerry Webworks App does not work on the Simulator after conditioning

    Hi everyone, I ' ve developed a webworks app and everything works fine on the emulator ripple, but when I load it on the Blackberry (9860 and 9930) Simulator... it loads successfully (I can see the icon, etc.), but when I open it, appears only a WHITE SCREEN...!

    I thought it was the Blackberry Simulator, so I changed it (does not work)

    I thought it was my application, so I leave my fair "index.html" with a BLACK background (does not work)

    the Validation of my config.xml file is fine, and I have not any idea on how to solve this problem!

    Help please, thank you

    http://mundourbanohn.com/Simulator1.jpg

    Hello, thanks for people, but I already solved this problem, I had a div with POSITION: FIXED; and apparently WebWorks does not support this CSS property, so I removed it and everything works fine. Thanks in any case. Concerning

  • LAN does not work when the Cisco E1000 router hangs

    Original title: Download sp3

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

    I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi mdenrique,

    1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

    If you have not installed Service Pack 3, try the following steps:
    Step 1: Download Service Pack 3
    see How to obtain the latest Windows XP service pack .
    b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
    c. save the file on the desktop.

    Step 2: Install Service Pack 3
    a. open the file downloaded and follow the instructions in the wizard to complete the installation.
    b. restart the computer once the installation is complete.

    For more information, see steps to take before you install Windows XP Service Pack 3

    Note: Once you have installed service pack 3, install the router and check if the problem persists.

    Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
    a. Click Start and then click Help and Support.
    b. under Pick a help topic, click Network and Internet.
    c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
    d. answer the questions in the troubleshooter to try to find a solution.

    For more information, see the following articles:
    1 see How to troubleshoot a network in Windows XP
    2 see two resources to solve the problems of connection network in Windows XP

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • VerticalAlign VBox does not work when the child has the height in %

    Hello

    I got the code like this:

    <mx:VBox id="vb1" verticalAlign="middle">
    <mx:CheckBox .../>
    <mx:VBox id="vb2" height="50%">
    ...
    </mx:VBox>
    </mx:VBox>
    

    Effect is that verticalAlignment does not work for the 1st VBox (it seems to me that it is set to the default value - 'top'). It works when I remove property "height" of the 2nd VBox (or when I change to "50%" to "50" or any other number).

    Hi Ibarim,

    verticalAlignment won't work for VBox when you have two or more children and who are direct children. When you have only a single direct children of the VBox, then it will work. Normally we use verticalAlignment = "middle" HBox and VBox. As VBox sets out its children vertically this property does not work when you have children over 1.

    You can try this

    width="200" height="50%">
    
    
    
         
    
    
    

    The above two combinations work correctly you only have immediate children... But if you see the bottom of case...

         width="200" height="50%" backgroundColor="yellow" verticalAlign="middle">                                  
    

    Now, in the case above, you can see that VBox vb2 is vertically aligned middle in the vb1 vb2 VBox is the only direct child of VBox vb1. Whereas it is now in the vb2 VBox box and VBox vb3 are not aligned vertically in the VBOx vb2 as because VBox vb2 contains now two children.

    Hope this is clear and make you understand the problem.

    Thank you

    Jean Claude

  • Chicony usb 2.0 camera does not work when it is turned on

    During opening camera or Windows Live help software (Toshiba), the camera that is built into my laptop does not work. In Windows Live Messenger, when I try to make a video call, Windows Live Messenger stops. When I open the camera the camera assist software does not and I have no control with camera software settings.

    Hello

    I suggest you to contact the hardware vendor for assistance.

  • my memory card for my digital camera does not work when I put it in the memory card slot

    I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

    Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
    then
    Device Manager
    Expand portable devices
    the type of memory card slots should be listed if your type is a yellow triangle in it,
    Right-click on it and choose uninstall.
    It should reinstall it automatically or when you put the memory card in the slot.
    This type of fault is often caused by not using material on the taskbar does not safely remove request.

  • Audio BlackBerry Smartphones BlackBerry Curve handset does not work

    This has happened much latley, I don't know if I am pressing a wrong button in my pocket or not. When I make a phone call or someone calls me. They can hear me but I can't hear them. If the audio does not work on my end.

    It is a common problem among people who open MMS messages with sound. So far, the only solution is a battery pull. I read that RIM knows about it and is working on a patch.

  • V11.0.12 XI and IE11 Acrobat. Hyperlink inside the PDF does not work when the PDF file is opened with any browser.

    V11.0.12 XI and IE11 Acrobat. Hyperlink inside PDF is a blue rectangle and links to another PDF. When PDF is opened in Acrobat, the link works. When opened in any browser (IE, Firefox, Chrome) the link does not work. How can I get the link to work in browsers?

    I think it is a bug. I uninstalled Acrobat and reinstalled Acrobat v11.0.0. I tried the link and it works properly. Then, I installed each both updated and tested the hyperlink. Update 1-10, that the link works. However, when the 11.0.11 update is installed, the "Go to a page in another document" hyperlink stops working in browsers. V11.0.12 installation does not solve the problem. If I uninstall Acrobat and install v11.0.0 with updated v11.0.10, everything works fine.

  • Wireless camera does not work with the new router

    Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500.  The manual of the camera can be found here.

    http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF

    It worked fine with my old D-Link router.  The rest of the House has not had a problem with the EA4500.  There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router.  Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera.  It still does not work.

    I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone.  This camera with our old router setup took minutes.  I spent five hours trying to make it work on the EA4500.

    I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.

    What was the authentication wireless on the old router and that you use the new 4200?

    Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?

    Have you tried WEP to see if the unit works then?

  • Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

    Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

    Hi cdk14031


    You have set display up-to-date drivers installed?

     

    Step 1 :
    To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
    Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    After the computer restarts, the drivers will be installed automatically.

    Step 2:

    If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

     

    You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly


    You can also check the support link and check if these help - below

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

    I hope this helps.

  • Microphone does not work when the headset is connected (Windows 7 with Realtek HD Audio).

    I am a user in advance, but this got to be one of the funniest problems ever. First, I had 2 headphones with microphone.

    1. An old helmet specified with microphone
    2. A new headphones A4Tech HS-100 with microphone that I just bought
    Problem:
    • Using the new helmet I bought, when I plug the microphone (pink jack even) it works, but also when I plug in the headphones (same headphone jack), the microphone no longer works (cannot receive all the sounds, even if it is detected clear as already plugged) and only the work of helmet.
    The most funny thing is:
    • The old headset works fine when I plug the microphone (jack Pink) and headphones (headphones) to my ASUS N81V laptop.
    • When I plug the microphone on my laptop and plug the headphones to my iphone, the microphone and the headphones work!
    • To experiment more, my laptop has a HDMI output connected to an external HDMI monitor, when I connect the microphone on my laptop, only it works, but as soon as I connect the headphones to the headphone jack on the external HDMI monitor, the microphone works again!
    Things, I tried and does not work:
    • Maximize the microphone amp
    • Separate entry made in the audio Panel
    • Ensure the microphone is not dumb anywhere
    • Install the latest drivers from the manufacturer and realtek Web sites
    I want to get both my mic and headphones works when plugged the laptop, what exactly is the problem? Any help? Thank you very much.

    I have a similar problem with my netbook a built-in microphone running Windows Starter, that's how mine to get the fix:

    Control Panel - his - recording tab - click on Configure button - set up micro - Configuration of the Microphone Wizard.

    You'll see three choices 1. Headphones Microphone 2. Table microphone 3. Others.

    All what I have to do to fix my netbook is to select the desktop instead of headphones with Microphone Microphone (it has been revived somehow).

Maybe you are looking for

  • Sony DSC - w30 firmware?

    Hello I have a Sony DSC - W30... and I want to know if there is an update of the firmware that has the Romanian language. Is there any type of firmware? Or how can I have the Romanian language in this device? Please help me

  • HP Pavilion 154na-550 desktop: w1907s HP Monitor &amp; Windows 10 (64-bit) - idle screen calendar

    Hello I am the proud owner of a HP Pavilion Desktop 154na-550 new running Windows 10 (64-bit). The machine works like a dream... much faster than my old PC. I have a question to ask, referring to my monitor HP to the existing address w1907s and attac

  • How doI reset the power on password on Presario cq60 mycompac

    How can I bypass my compaq presario cq 60 power on password

  • Continuous imaging using vision builder

    Hello, I use NI 1744 and want to know how to get and record continuous images using Vision Builder. I am in a position to acquire and maintain a single image but cannot acquire continuous images.Looking forward for your help.

  • EVGA GTX 750 TI

    Hello, so I bought a ti EVGA GTX 750 yesterday and, to my dismay, the computer just sits there at the HP logo. I hear no beeps or anything and the fan runs. If I tap Ctrl + alt + del it restarts but I'm still hanging on the hp logo. My PSU IS only 30