Smartphones blackBerry white screen and light flashing when plugged into the charger

phone was low load and I let it run out, but when I plugged in the charger all that I get is a blank screen and flashing light.  How he goes again please.

Hi Pattisalt59

Have you tried to remove and reinsert the battery while your device is connected to a charger? If not try and see if it blinks.

Tags: BlackBerry Smartphones

Similar Questions

  • Satellite A500 - battery light flashes when connected to the power supply

    Win 7 Satellite A500 PSAM3A-03P00E.

    Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

    Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

    Charges of battery and the wedges load properly (when the battery flashes).


    Have you noticed this problem since the first day of purchase?
    Theoretically, it could be possible that your battery begins to malfunction
    On the other hand, an electrical problem could also be possible

    However, try this:
    Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
    Then insert the battery and plug AC adapter still does that help?

    By the way: this is the BIOS updated? If this isn't the case, perform an update.

  • DeskJet 3632: Does not work when plugged into the laptop

    When my printer is not plugged, it is all set up and ready to print. But when I plug it into my laptop, the button just flashes, all other buttons are not on and the screen is blank as well as this, it is not picked up at all of my laptop.

    If anyone has an idea why it continues to be please help! Thank you

    Hi @Jademercer,

    Thank you for joining the HP Forums!

    I understand that you get a white screen and the button flashes with your printer HP Deskjet 3632. I'm happy to help you!

    Are you able to print a test page without the printer being connected to the computer?

    Print a test page to make sure that the equipment is working properly.

    1. Make sure that there is no US letter or A4 size, unused, plain paper in the input tray.

    2. Press and hold the power button / , then press the Cancel button .

    3. Release the button cancel, then the power button.

      The test page will print.

      Figure: Example of a test page

    In the meantime, please take a look at this guide, the lights flash.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope hear from you soon!

  • iPad tells me "Not Charging" when plugged into the docking station

    It is a very new problem for me. I had the iPad the same docking for the months and not had a problem. But now when I plug in, the iPad now tells me in the upper corner is it 'not supported' y at - it something I can do to fix this?

    There seems to be something that is changed with iOS modified 10 power requirements for the load.

    No idea when or if things will change, so all users can make use of the work load by plugging into the wall.

  • Headphones + microphone does not when plugged into the headphone jack on Macbook pro.


    I have a problem that has caused me a lot of irritation just because it seems so simple to fix, but Ive tried practically everything that I can think to do better and it has really improved.

    I was skyping the other day and I took my headphones into the headphone. They have a microphone in them. When I plugged hide them in, I could hear the other person, but they could not hear me. It was the first time Id used for Skype, but still, something must happen in this brief moment of ruin.

    So I did some research here and on google and I couldn't find much. The page here titled "Why slope my friend hear me on Skype" seemed to work correctly the first time, I followed his instructions, but to test it, I unplugged my helmet again. Once again, it fouling all upward. I even wrote the settings he was conducting (apple System Preferences) and Skype and when I put them in the way it was when it worked, it worked this time.

    Just to be clear, I fixed it, but then to test it, I took out my helmet again and it has stopped working and even with the same settings, it will not work. It's extremely frustrating.

    It will work when I plug my headphones into the audio jack, but then I can't out of my helmet, which defeats the purpose of having them.

    My headset is not broken and my helmet is not broken because I can listen to music through my headphones and use my headset to call my friend on my helmet.

    I feel that somehow, my helmet (which previously was transmitting my input headphone MIC perfectly) has become messed up somehow (I feel like there must be a setting or something that Im overlooking) and I just need to configure it to work at the time of entry and exit instead of having input/output divided between the helmet and the microphone port.

    I hope this was clear enough. Please do not hesitate to ask me any questions that you may find useful.

    I can't tell if it's a Skype problem or a problem of mac, but Im asking here just see what I can learn.

    Thanks in advance

    Too bad. I forgot the first rule to set anything on the computer: turn off and on. It works, but it seems absurd that something like that (what I think is something fairly common) would need to restart your computer.


  • Acer Aspire V5 552 slow game performance low when it is plugged into the charger (HELP!)

    So, I recently noticed that my Acer laptop has a problem when it comes to games. The speed of the CPU is really low when you start a game, I did not notice this until a few hours before... I was playing Borderlands 2 and I am disconnected from my laptop to move it to my office and I noticed that my FPS has increased almost double what they were before, I plugged my laptop for the charger and I started to look at the the CPU cores, each carrot got preatty fluctuating between speed and low speed. I've tested this with all my games and all had the same results, for example a Borderlands 2 area when it is plugged in the exercise was about 18-22 FPS, but when disconnected from the charger the FPS increased from 34-48 or more. I tried to read a lot of things on the web and can not find a solution to this...

    Another test I did was with Dolphin Gamecube emulator, the FPS when playing the legend of Zelda The Wind Waker varies between 22-26 or lower on the places of strong thickness, when unplugging my laptop charger I have 30 fps constant in these heavy areas.

    Also with Counter Strike Global Offensive, the game normally ran about 50-60 FPS in all the cards and then tested without the charger plugged in and got 70-120 FPS on all cards

    This video shows exactly what happens for me, unless I have an AMD GPU and CPU.

    My Acer Aspire V5 552 Specs are.
    Windows 7 X 64
    8 GB RAM
    AMD A8 - 5557M @2. 1 GHz to 2.8 GHz Turbo
    AMD 8550G GPU
    I have all the latest drivers and updates installed.

    The charger is not damaged, it is original one supplied with the notebook.

    Got a nice deal on a MSI gaming laptop. At first I thought that the Aspire V5 has been an excellent laptop for budget games, but then turned that has a performance problem that ruined the processors to give power maxi while only plugged in, but when unplugged the other way around. Still a nice cell phone with potential wasted with this particular problem.

    No solution to this problem, tecs don't even bother looking at BIOS like other manufacturers of laptop to solve this same problem.

  • Spectrum x 360 Convertible: laptop grinds to a halt when plugged into its charger.


    I hope someone can advise me.

    My laptop recently has problems of severe performance as soon as I plug it into the charger. Everything runs slowly, even just open a website takes an age, windows navigation menus is slowly, basically, every action you perform runs on a 10th of normal speed.

    I used HP online support and the chap took control in my PC remote, lots of services disabled and starting the process and then restarted my PC, making it even more useless! I couldn't even reconnect to the HP support to undo changes, he did. And he has not tried to call me after f * king my laptop.

    Anyway - I have heard that a defective charger may cause the problem I'm having, but when I suggested that he told me that it is a myth.

    Can someone tell what could be the problem. The parameters of plan of my food look good and nothing has been changed in the OS, so I can't understand why this only happens when I load the wretched machine and can only assume a faulty charger or mobile hardware problem

    Thanks in advance.

    Hey there!

    It is MCC, another post that you comment. I can't find the answer on this topic button so I found you here instead.
    Looks like you have the same problem I had. I tried tons of stuff to fix the problem but nothing did the trick.

    But then, I decided to buy a new AC adapter and check if it was the problem.


    I don't pretend to know that your computer has the same problem as mine, but for me, a brand new $ 80 real AC adaptor has been around. Laptop still works like a charm on this adapter. I made sure to buy a better one than the one that came with my laptop. I used to have a 90W, now I have a 135W, compatible with my laptop model.

    I hope that she can help you to know that it worked for me.

    Best wishes


  • Smartphones blackBerry white screen on default settings and no internet, please help:)

    Hey guys,.

    I was wondering if someone can help me with my phone of girls

    I can't do access the internet it says unable to connect to the internet please try again later! However its connected to my hub home right now I checked its saying its connected.

    also when we try to email through its only give 1 option, which is email with enterprise server works and my daughter I just wanted to add her email addy, it had for centuries

    I was on the default screen, however, it's just a white screen with no info at all and when I try to load the help on the phone screens, he gets a full term on the small bar, then freezes?

    I took sim out and put it again and also his friends send their pins him however shes receive is not one of these applications?

    When I bought the phone, the guy said I'll put a few things for you so I don't know what he did lol

    hope some1 can help us


    Hello and welcome to the forums!

    The only option of BES (corporate e-mail) and don't get don't not BBM guest would indicate to me that you don't have a BlackBerry of your carrier data plan. BBM and BIS (personal mail) require an appropriate data BB plan.

  • Satellite M110 - Orange light flashes when I push the power button

    just before I managed based on the knock off my bed, on a glance the plug that goes into the computer look slightly bent and now when I try to turn it on, it does not work. even when it is plugged.

    An orange light is always flashing down the bottem when I press the button.

    So is this a problem computer or a power supply problem?

    Hi becks88,

    Sounds like a serious problem of material... You can start Notepad without AC/DC adapter or is the battery charging adapter?

    Try to delete also the adapter AC and the battery for an hour at least. Then reconnect the two and try to start the laptop.

    In the worst case you need professional help a :(authorized service provider

  • HP Officejet 8500 A909g is not recognized by my computer when plugged into the usb port

    I received an email from HP recommend I install new software for my Officejet Pro 8500.  I downloaded the software and installed.  The printer was working, but it would not scan. I got an error message telling me to re install the software because the analysis part has not been installed. I have downlaoded software again and installed it. During installation, the mode had to unplug the printer, so I did. (It is connected using the usb cable directly to the back of the computer).  When installation instructions came at a certain time, it told me to plug the printer. I did, but it was not recognized.  I checked the box to install all the software and install the printer later.  Now is back, and the printer is still not recognized by the computer.  Help, please.

    Hi Steve_finch,

    What operating system you have installed on the computer?

    Have you tried a new USB cable or a USB port on the computer?

  • Wired connection slows down when plugged into the laptop


    I have a wired connection to my laptop and you have a problem a week that my internet is slow. So I called my ISP and told them on this subject. My ISP says my connection is under FUP (Fair Use Policy - down internet speed when you reach the maximum bandwidth provided by your ISP in the months. - ONLY in the PHILIPPINES that is really annoying and disturbing) anyway, so I tried to stop using my wired connection to date and use the Wi - Fi connection. It went well, I have a fast connection again. And then I tried to connect again to a wired connection that is different from my own wired connection, it is connected to a PC and have a good connection speed. So I connect it to my laptop and expect that it has good connection to check if there are updates in my system. Surprisingly, the internet connection on my laptop was really very slow. I tried to check internet speed using Speedtest and 0.17 to 0.20 Mbps operation. So I removed again and again on the PC. When I checked the speed of connection on the PC, it gives me more than 3 Mbps.

    That's what I've done so far:

    Update drivers / windows

    Active mac address / changed

    Frushed DNS

    and finally tried to reformat and it seems not working do not and have the same problem.

    I have LENOVO IdeaPad S400 Touch with Windows 8 on it.

    What seems to be the problem?

    Thank you!

    Hi Raymel,

    Yes, it's maybe a problem with the network card. I suggest you to contact the manufacturer of the laptop to get help on this issue.

    Please let us know if you have more queries on Windows.

  • Smartphones blackBerry automatically roboot and switch off when the loading and unloading...

    my phone gets off power using... and it reboot peremptory I did not able to use the mobile... and also my data is on, but the phone does not connect to the internet. so I couldn't go... my memory of inbuild is also free (137/480) and I already have the micro sd card. Please help me solve this problem...

    Your message is difficult to read and understand. Nevertheless, here are some thoughts and ideas...

    Turn off or restart in use: lack of battery Possible. Possible loss of connection of the battery with the unit because of the movement of battery in the compartment, or dirty or corroded contacts. Possible software or the definition glitch. Failure or damage possible peripheral equipment. Troubleshoot, exclude a possibility at a time, starting with the simple and the less than fresh.

    No BlackBerry data service: no data, or no service book plan. Add line if necessary plan. Do this correctly configured carrier plan. Return service directories.

    Out of memory? Too many applications, too much data. Remove the need to free up needed space.

  • SansaFuze lights when plugged into the USB port.

    Hi.My SansaFuze won't turn on when I plug it into my USB port and I don't know why. He worked on Saturday but still doesn't work. Any help?

    Thanks dude. I didn't know the back USB ports. You, Sir, are my heroes. Again, I can put music on my thing. Thank you very much.

  • Camara photos do not show when plug into the computer's time a 2nd

    If I plug my camara to the computer and show the image files and now when I plug it for the second time that the file showed that copy and the custom of photos to display at all in my computer or any other computer. who is wrong?

    Does this have to do with Internet Explorer 9? In any case...

    Please provide:

    -brand and model of the camera;

    -format of images, for example,. JPG or. NAVE;

    -the version of Windows you are using.

    There is usually a setting in the camera software on the PC that allows deletion of files on the camera after the files have been transferred. If you have not enabled then whenever you connect your camera, it will transfer all the files on the camera again.

    In regards to pictures displayed, this may be due pictures in a raw owner who is not recognized by Windows 7, unless you install the codec from a specific manufacturer. Try making sure that your device is set to take the files. JPG or. Format JPEG as Windows will recognize these (or install the codec).

  • my headphones (or headsets) does more work when plugged into the audio input jack

    I have a 2010 27-in. iMAC.   I am running Yosemite 10.10.5.   Recently I can't get audio on the audio jack that I always used with my helmet.  Have tried the other sons of contact as well as the apple earbuds.  Audio is great internal speakers.

    When you plug your earphones sound still come through the internal speakers?

    When you plug in your headphones, you see those as an option in preferences-> sound-> release system?

Maybe you are looking for