Smartphones from blackBerry Curve 8530 is not connecting to WiFi

I have a blackberry curve 8530 and get a message Traoré says, "Failed to associate with the network." My Wi - Fi is not secure, but I implemented a filtering of MAC addresses. I entered the MAC address of my BB in the filter list, so it should work. I have a Linksys WRT54G2 router. My phone can see the network, but cannot connect. Any ideas?

Hi mdishe01,

Are you able to connect your BlackBerry to any other open network? If you disable the address filtering Mac is able to connect to the network in your BlackBerry?

Tags: BlackBerry Smartphones

Similar Questions

  • Smartphones from blackBerry Curve 8530 has stopped responding during the wipe - I'm in trouble!

    Hey Gang,

    I'm in a bit of a jam and I hope someone here can help. I searched the forum for an answer but couldn't locate one.

    I have a Blackberry Curve 8530 and he knows some from time to time to gel.

    Model: BlackBerry Curve 8530

    Carrier: Koodo Mobile (Canada)

    Software version: Bundle 5.0 1108

    I decided tonight to backup all my data and do a "Wipe of security" in the menu options.

    I selected these two options, type "blackberry" and clicked on "wipe".

    I currently have the popup on my screen that says:

    "Deleting information...".
    WARNING: do not pull the battery until the erasure is complete. »

    On top of this popup is the formidable clock Blackberry with him will hand turns around and around (like an hourglass would be on a PC when it is "thought").

    It has been like this for nearly two hours now and seems to not react any longer.

    UPDATE:

    OK... good news... of all kinds...

    The phone has finally turned on and proceeded to go up through the deletion process and it now on the home screen.

    Now, the only problem is that when I wiped it off, the programs that I had downloaded previously are still on the device so it didn't completely wipe it off as I intended.

    I'll try another rag and hope for the best.

    See you soon!
    Jeff

  • Smartphones from blackBerry Curve 8530 stuck on reboot

    I have a curve 8530. This morning he updated an application and went to restart, and now it is stuck at 2/3 of the way to reboot. Can I do to solve this problem?

    Really, the battery for five minutes, replace and try from the restart.

    Is to let rest for awhile when it hits the 2/3 mark... after 15-20 minutes, if not go away... then read below.

    (1) make sure that you have Blackberry Desktop Manager installed.
    http://NA.BlackBerry.com/eng/services/desktop/
    (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

    'c:\program files\common research in motion\apploader\loader.exe' /nojvm

    (3) the Application Loader Wizard will appear - click on "next".
    (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
    (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

    NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
    http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

  • Smartphones from blackBerry Curve 8530 - need help with Google calendar sync

    I just upgraded to a new curve 8530, I had the old version of curve and google sync is the ideal platform for my emails, contacts and calendar. It was the first download I did on the new version, but I'm having problems with the calendar.

    Downloads of Google calendar on my phone work fine, when I enter a new date of calendar on my computer, it creates a new event directly on my phone.

    However, when I add a new event on my phone so that the comings and goings, it does not update my computer google calendar. It refreshes only one way.

    I know that there must be a simple answer here, I just can't find it. Can anyone help?

    Solved, basically enter the google sync options.

  • Smartphones from blackBerry Desktop Manager does not connect to BES

    Hello

    I'm trying to connect a BlackBerry (device or Simulator) via USB for our BlackBerry Enterprise Server (BES). He worked for another instance of a BES and also a BES express test. We are using Microsoft Exchange. So I have a couple of Outlook profiles. When you start the Desktop Manager, I select the profile according to the connected device. Communication between the Desktop Manager and handheld works well. The only problem is the connection to the BES.

    Device Manager displays under bridge "Connecting" (somewhat similar, it is not executed in English) and the name of the server is "srp.eu.blackberry .net: 4101. Then it tries to connect to the internet instead of the local server for BlackBerry. With other BES servers he was always showing the IP or the local name and the connection was set up immediately. Unfortunately at the moment I have no other BES to connect to.

    I searched my local registry for the parameter in the Office Manager, but just under HKEY_CURRENT_USER\Software\Research in Motion\BlackBerry\PINData of the correct (as S12345678) serviceUid of our local BES server. My problem is, I don't know how this serviceUid is mapped to a server name.

    Our license to a BES 4.1 which has been updated to a 5.0, there may be a few old settings that block the communication.

    Question: whence the Device Manager get the address from which it connects? It appears in the Exchange? Or in the BES (global or with the user)? Does the Desktop Manager searches for the name itself?

    PS: Desktop Manager 5.0.1.42 (25 Sep 2010), 6.0.0.13, BBDevMgr 4.1.0.14 Device Manager

    Finally, I found the solution! It's pretty simple if you know where to look:

    '' Cause. ''

    Routing server (RPS) Protocol address was listed as a server name. The host router only accepts connections from localhost. »

    KB18489

    In the BlackBerry Administration Service you should check the settings of the PRS. This is in the instance of the component dispatcher. In the section "RPS addresses" is only the value 'localhost' authorized. Someone here enter the name of the RPS server. Now when I enter just "localhost" the device series (by USB) works again

  • The Smartphones from blackBerry Desktop software will not connect to 9700 Win 7

    Recently, I lost my 9800 "BOLD" and had to go back to my old 9700.  When you try to resynchronize the 9700 for the desktop software, it started the process but then stopped.  Now the software connects to the device even if the device shows connected to the desktop computer.  In addition to the software crashes and cannot be closed.  I tried to uninstall and reinstall the desktop software but no improvement.

    Any ideas.

    Thank you

    Peter

    Interesting... the only time wherever I got a message like that is when I am attached to my PC and using the AppWorld on the web from my PC browser... a plugin is installed on the PC so that it works. I never recall a message as you describe directly from the desktop software.

    There is no need to use the older Desktop software... in fact, under Win7, it is even probably not supported. So, now I suggest the following steps (reboots insert a lot of restarting your PC... not only restarts, but at full power down). In addition, it is recommended that you are connected to the PC on an account with full administrator rights. In addition, under Vista/Win7, use the option "Run As Administrator" for everything.

    In addition, it was also reported that when your user profile on windows (type "echo %UserProfile%" in command prompt) contains spaces, then the installer will not work. To resolve this issue, log off from your Windows account and sign in using the local administrator account (or any other name of account without spaces) and install office (for all users).

    (1) delete your package to update device OS of your PC (Add/Remove Programs)

    (2) properly uninstall the RIM desktop software:

    • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    • Some noted that there are several registry keys to remove talk in this KB... don't forget to get your all associated with RIM registry database
    • Others have reported the use of a registry cleaning tool to be also useful
    • Still others have reported the use of your original PIM (Outlook, NOTES, etc.) Installation CD, run the "repair" to be helpful in some situations process

    (3) obtain a new download of the RIM Desktop software:

    (4) to download a new copy of your package to your carrier OS device (on your PC):

    (5) install the software on your PC Desktop

    Installation of 6) (also on your PC), device OS package

    (7) start the configuration Organizer:

    • KB17022 How to configure applications to Organizer for synchronization using BlackBerry Desktop Manager
    • KB23681 How to configure settings to synchronize Organizer data using BlackBerry Desktop Software 6.0

    If all goes well, who's going to make things again.

    Good luck and let us know!

  • Smartphones from blackBerry Curve 8530 dead. Need help

    My 8530 worked fine in the day-then it is stopped for some reason any. The battery is fully charged. The phone will power any. When plugged into a charger the red LED lights up briefly then there is a symbol of a battery charge that will appear on the screen. The phone still does nothing. When connected to my computer in the Device Manager the phone is recognized by the computer but I can't use all the data.

    Any suggestions? Phone 3rd in 4 months!

    I removed the battery several times to try to reset. I left out the battery for about 30 minutes, re-installed and bingo! If first you don't succeed try again! It is running. Thanks for your help.

  • Smartphones from blackBerry Curve 8530 with Alltel Service

    I take a contract job in Jeddah, in Saudi Arabia. Will my phone work? It is my understanding that my model does not have a removable SIM card so that I could not go out and use a provider of SA.

    Any help or assistance would be greatly appreciated.

    Thank you!

    Hello!

    Well Yes, since you have a removable SIM card option then I doubt it will work in your new location.

    But aleast you can contact your service, maybe they can take this phone off contract, after which you can use it freely with the SIM card in different countries.

    I hope that solves your problem!

    If your problem has been resolved then would you be asked to click 'Like' and accept as a 'Solution' that other advisors invest it times on this Message more.

    Thank you.

  • Smartphones from blackBerry Curve 9360 and USB connectivity in the form of media card

    I was wondering if anyone knew the answer to this question.

    When I first connect my BB for my laptop, I am presented with the possibility of using the media card on the phone as a USB device.

    If I refuse this and leave the phone connected via USB, it is possible to use the storage media card later without having to disconnect and reconnect the device to get the command prompt?

    Thanks for your comments.

    Hello and welcome to the community!

    Sorry, no... Once you refuse, which remains in force for the duration of the session. So a new session needs to be generated, which requires the Quick disconnect/reconnect the USB cable.

    Good luck!

  • Smartphones from blackBerry Desktop Manager does not connect with the storm

    Help - I have my head in half way inside an oven gas in despair.   I tried to get on my PC BlackBerry Device Manager to recognize my Storm for a week now.   I uninstalled and installed a trillion times without change.   I tried the USB key in a number of different sockets.   Today, I got my Storm at the phone store.   Their PC instantly recognized the storm using the same USB cable!   Can someone please tell me what is wrong or how I can fix this problem without a hammer?

    What the! *   He worked and immediately synchronized with all my Outlook stuff!   You saved my BB a dead certain violence - thank you very much.

  • Smartphones from blackBerry Curve 8530, unsync or unintegrate sms/mail

    Hello.  I have my messages and district e-mail icon on my home screen.

    When I get an email, I also have a notification in my messages folder.  How can I disable this so that each goes to his folder/box appropriate without notice to the other.

    Thank you!

    For the integration of messages, open your Messages folder > Menu key > Options > Inbox settings.

    Now here you can define which e-mail accounts feeding into your main messages folder?

    Some newer devices and releases of OS have this option. If yours does not, then all email will come in the main folder.

  • BlackBerry smartphone BlackBerry Curve 8520 BIS not connected

    Hello

    I got a BlackBerry Curve 8520 at work for some reason, my BIS does not work, it says not connected and I can't seem to fix. The here's what I've done so far.

    1. checked with my carrier (MTEL.BG) I have all the necessary data active serivices.

    2 rebooted a few times handheld (battery pull and waited 30 seconds).

    3 Resed to factory settings.

    Tried to register my device using host Routing Tables (the table is empty), but nothinh happens.

    Called tech support and they attempted to register my devide without success. They said that my pocket computer probably have a fault and replace it.

    Somehow, I think that my carrier or my own missing something and this should be fixable.

    Any ideas?

    EDIT: my phone signal is still on board, but I noticed that colleagues (with BIS job) have EDGE instead.

    Thanks in advance!

    Cabeza2000 wrote:

    Thanks for your reply about THS... I know that other guy managed to do that, but nothing for me. It can have any relationship with the fact that I have on board and that they have on BOARD?

    100% directly related.

    Overall, honestly, it's your carrier which should solve this problem. If you bought the BB through the carrier and they can't or won't to solve it not, then by all means in their recommendation of replacement.

    Good luck!

  • Smartphones from blackBerry Curve 9380 - battery drain after loading software updated BlackberryID

    I have a Blackberry Curve 9380 with software v7.1 2931 Bundle (v7.1.0.1098) when you open the browser of th, I had "unhandled exception: the bridge has been destroyed." I loaded the latest (software BlackberryiD

    net_rim_bbid_daemon v7.3.1.11) and this fixed the problem of browser, but battery now from 100% to 0% in about 4 hours. Previously a full charge lasts about 3 days.

    Someone encountered this or can recommend a solution?

    Thank you

    Chris

    CHRISALIS wrote:

    Someone encountered this or can recommend a solution?

    CHRISALIS, try this first... with your 9380 connected to the wall charger and BlackBerry power, remove the battery and reinsert it to restart. This will often reset the battery meter on the device (which over time can become out of sync with the actual load of the battery). You may need to try this over a few times the next day and the next.

    Don't let not your battery to flow all the way to 0-10%, top it off during the day when you can, even for 15 minutes.

  • Smartphones from blackBerry Curve 9380 - gel/pause

    I've had this phone for nearly 18 months without any problem, but last week I almost he threw out the window!

    For starters, he did pause for a few seconds, making send SMS, e-mail etc very frustrating! You might be texting, and then it is paused on everything that touches your tent to support on, then will take between 5 and 20 seconds to come for herself. Sometimes when I unlock or just try to navigate the phone - its fustrating Yes aswell!

    And then yesterday and today, the battery had drained by noon, although he had been accused of the overnight! I rebooted my phone at noon today, and its once again once drained (18:20)!

    They relate, or if my phone died?

    Hello and welcome to the community!

    Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

    1. With battery, connect your BB to the wall charger
    2. Leave it alone for 2 hours, no matter what the LED or the screen not
    3. Remove the battery
    4. Wait 15 minutes
    5. Insert the battery
    6. Wait another 2 hours, no matter what the LED or the screen not

    This has been known to "revive" some BBs.

    It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

    1. Get a known good and already fully charged battery... use it in your BB and see what happens
    2. Get access to a BB good and the same known... use your battery in there and see what happens

    The results of this will show if your BB or your battery that has the problem.

    You can also try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • Update of Smartphones from blackBerry Curve 8310

    Hello. I realize that there are a lot of topics explaining OE to upgrade these smartphones. However, none of them address the issue I am experiencing.

    I'm trying to upgrade Blackberry Curve my wife v4.2.2.181 (Platform 2.5.0.35) to the latest OS (v4.5.0.302).

    It's an O2 handset unlocked running on Vodafone UK.

    I run the Desktop v6 software. It recognizes the phone without problem, but will not accept that there is an upgrade available.

    I downloaded the new OS and deleted the file vendor.xml without success.

    The opening of the list of applications in the desktop software, it shows only three applications: Bloss (Status: mandatory); Bloss One Click (Status: mandatory); and Google Sync (Status: installed).

    Screenshot:

    I get the same list of apps in the app Loader program. I know that from my own phone (Curve 8320 which walking without probs) it should show the OS and various other softphone.

    I would be grateful for any idea that anyone can give!

    Hello

    I advice you jump in front of Desktop software (with the exception of the backup/restore). From a PC, you can install any bundle of BONES to a BB via this procedure:

    Note that although written for "reload", it can be used to upgrade, downgrade, or recharge - it depends on the OS package you download and install on your PC. You can even use a different OS package carriers simply insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML. remember that you remove, since any other devices OS BB as packages with more than one installed on the PC, your PC may result in conflicts with this procedure.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

Maybe you are looking for

  • Clips of the video choppy after export to the formats .m4v.

    I created a photo slideshow with some video clips.  The clips will play in Quicktime, Photo Slideshow, etc.  But when the slideshow is exported in a .m4v format film, the clips are jerky.  Even the DVD created with the .m4v movie plays jerky clips. 

  • Qosmio E10 need repair, but I am not agree Exchange motherboard

    Hello world. Since 2004, I have my Qosmio E10.I bought in the Uk, but I used in Europe & Brazil. But he has a little problem always over heating the cooler sink fan never stop work or stop if you choose internet, as well as sometimes to turn off my c

  • Windows cannot find "(null)".

    The title is the error message I get continually whenever I try to start Skype. I rebooted, reinstalled and tried to find the problem, but I can't do it.

  • version of the changer

    Hello I have applications made in Labview version 5.1, plug-in now Labview 8.6, and so I failed to open my question is there has you it a method that allows me to convert and become compatible with my version that plug-in. Thank you and see you soon,

  • There is no sound on my computer speakers. I have Windows XP.

    There is no sound on my PC speakers