Smartphones from blackBerry Desktop Manager does not connect to BES

Hello

I'm trying to connect a BlackBerry (device or Simulator) via USB for our BlackBerry Enterprise Server (BES). He worked for another instance of a BES and also a BES express test. We are using Microsoft Exchange. So I have a couple of Outlook profiles. When you start the Desktop Manager, I select the profile according to the connected device. Communication between the Desktop Manager and handheld works well. The only problem is the connection to the BES.

Device Manager displays under bridge "Connecting" (somewhat similar, it is not executed in English) and the name of the server is "srp.eu.blackberry .net: 4101. Then it tries to connect to the internet instead of the local server for BlackBerry. With other BES servers he was always showing the IP or the local name and the connection was set up immediately. Unfortunately at the moment I have no other BES to connect to.

I searched my local registry for the parameter in the Office Manager, but just under HKEY_CURRENT_USER\Software\Research in Motion\BlackBerry\PINData of the correct (as S12345678) serviceUid of our local BES server. My problem is, I don't know how this serviceUid is mapped to a server name.

Our license to a BES 4.1 which has been updated to a 5.0, there may be a few old settings that block the communication.

Question: whence the Device Manager get the address from which it connects? It appears in the Exchange? Or in the BES (global or with the user)? Does the Desktop Manager searches for the name itself?

PS: Desktop Manager 5.0.1.42 (25 Sep 2010), 6.0.0.13, BBDevMgr 4.1.0.14 Device Manager

Finally, I found the solution! It's pretty simple if you know where to look:

'' Cause. ''

Routing server (RPS) Protocol address was listed as a server name. The host router only accepts connections from localhost. »

KB18489

In the BlackBerry Administration Service you should check the settings of the PRS. This is in the instance of the component dispatcher. In the section "RPS addresses" is only the value 'localhost' authorized. Someone here enter the name of the RPS server. Now when I enter just "localhost" the device series (by USB) works again

Tags: BlackBerry Smartphones

Similar Questions

  • Smartphones from blackBerry Desktop Manager does not connect with the storm

    Help - I have my head in half way inside an oven gas in despair.   I tried to get on my PC BlackBerry Device Manager to recognize my Storm for a week now.   I uninstalled and installed a trillion times without change.   I tried the USB key in a number of different sockets.   Today, I got my Storm at the phone store.   Their PC instantly recognized the storm using the same USB cable!   Can someone please tell me what is wrong or how I can fix this problem without a hammer?

    What the! *   He worked and immediately synchronized with all my Outlook stuff!   You saved my BB a dead certain violence - thank you very much.

  • Smartphones from blackBerry Desktop Manager does not recognize that the "BOLD" is connected

    I loaded the Software Desktop including Desktop Manager v4.7.  When I connect my "BOLD" via the USB port of my PC, the PC recognizes the new hardware and identifies it as a Blackberry Smartphone.  But when I launch Desktop Manager, it does not recognize the "BOLD", and at the bottom left of the window shows "Connected Device (PIN): No."

    Can someone help, please?

    Thank you, but the problem was solved when I used a different USB port on my PC.

  • Smartphones from blackBerry Desktop Manager does not recognize my Sprint Bold 9650

    I put these questions I have on You Tube.

    http://www.YouTube.com/watch?v=lcSwbk7sxFE

    or you can search youtube for.

    Sprint Blackberry Bold 9650 Desktop Manager questions

    The software does not recognize my phone at all - ever - new install on 13/07/2001

    It's my first installation of the Software Desktop manager (no previous version where installed)

    I changed the power setting on my laptop USB ports

    Phone is version 6.0 bundle 2647

    Version of Desktop Manager is 6.1.0.35

    Thanks for your help-

    KB00125 - had the answer - I didn't know this - the data cable was thicker - the two cables where from Blackberry
    The answer
    Some USB cables are provided for only working load. These cables have no pins for data transfer.

    Implement a USB cable with pins for the transfer of data.

  • Smartphones from blackBerry Desktop Manager does not

    My version of Desktop Manager (DM) 4.2 on my Vista PC does not work correctly.  I can open it and connect to my Sprint

    8703e, but it is very little I can do with my DM such as the opening of aid.  Backup and restore option as well as other options are no longer available in my DM.  What happened to these options?

    Thank you

    Hmmm... I think that I have answered your exact same question to www.blackberryforums.com

    Try to update your Desktop Manager.  Also, I wonder if there is a COMPUTER policy on your device.  Look into the Options > Security Options > General settings and scroll down and look for any reference to politics.

  • Smartphones from blackBerry Desktop Manager does not recognize BB Pearl 8110

    Hello

    I recently bought a new desktop PC, with Vista 64 bit, but I can't get the BB Desktop Manager recognize my phone, I used version 4.7, 4.6 and 4.3 supplied on CD with the phone.  Vista recognizes the phone and install the drivers to add it as a USB mass storage device, but I can't get the BB Desktop Manager recognize the phone as being added.  I tried to install BB DM in different places, and my account is the administrator account.

    Thank you

    OK, problem solved.  After wiping my HARD drive and reinstall Vista, I installed in first DM and she managed to pick up my phone, but after installing all the MB drivers and associated software, the phone stops being detected, if clearly something which is installed with the MB prevents the phone to be seen, just a process of trial and error to find the guilty software now.

  • Smartphones from blackBerry Desktop Manager does not recognize the device without administrator privileges

    Hello. My "BOLD" BB works fine at home with 4.6 DM. However, at work DM detects that the device is plugged when I get with administrative privileges (Windows XP Pro, SP2). When I am denied the additional privileges DM cannot detect the BB.

    DM has been intalled under administrator privileges, but I'm not allowed with this privilege permanently.

    Any ideas?

    Thanks in advance.

    It seems that when DM has been installed, it has not been installed "for all users".  Maybe uninstall and when it is reinstalled, make sure that the option "for all users" is checked (insteald "only for this user").

  • The Smartphones from blackBerry Desktop software will not connect to 9700 Win 7

    Recently, I lost my 9800 "BOLD" and had to go back to my old 9700.  When you try to resynchronize the 9700 for the desktop software, it started the process but then stopped.  Now the software connects to the device even if the device shows connected to the desktop computer.  In addition to the software crashes and cannot be closed.  I tried to uninstall and reinstall the desktop software but no improvement.

    Any ideas.

    Thank you

    Peter

    Interesting... the only time wherever I got a message like that is when I am attached to my PC and using the AppWorld on the web from my PC browser... a plugin is installed on the PC so that it works. I never recall a message as you describe directly from the desktop software.

    There is no need to use the older Desktop software... in fact, under Win7, it is even probably not supported. So, now I suggest the following steps (reboots insert a lot of restarting your PC... not only restarts, but at full power down). In addition, it is recommended that you are connected to the PC on an account with full administrator rights. In addition, under Vista/Win7, use the option "Run As Administrator" for everything.

    In addition, it was also reported that when your user profile on windows (type "echo %UserProfile%" in command prompt) contains spaces, then the installer will not work. To resolve this issue, log off from your Windows account and sign in using the local administrator account (or any other name of account without spaces) and install office (for all users).

    (1) delete your package to update device OS of your PC (Add/Remove Programs)

    (2) properly uninstall the RIM desktop software:

    • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    • Some noted that there are several registry keys to remove talk in this KB... don't forget to get your all associated with RIM registry database
    • Others have reported the use of a registry cleaning tool to be also useful
    • Still others have reported the use of your original PIM (Outlook, NOTES, etc.) Installation CD, run the "repair" to be helpful in some situations process

    (3) obtain a new download of the RIM Desktop software:

    (4) to download a new copy of your package to your carrier OS device (on your PC):

    (5) install the software on your PC Desktop

    Installation of 6) (also on your PC), device OS package

    (7) start the configuration Organizer:

    • KB17022 How to configure applications to Organizer for synchronization using BlackBerry Desktop Manager
    • KB23681 How to configure settings to synchronize Organizer data using BlackBerry Desktop Software 6.0

    If all goes well, who's going to make things again.

    Good luck and let us know!

  • Smartphones from blackBerry Desktop Manager will not show that I am connected

    My "BOLD" will connect to my Vista computer via a USB port. I can copy files if I do it myself. Blackberry Device Manager shows that I am connected to my computer. The Desktop Manager program does not show that I am connected. It says I am disconnected. I am the administrator of the computer. I loaded the program using the option "Run as Administrator" enabled. It's very frustrating! Please help me.

    Thank you

    I got it! I had installed the program Microsoft parental control on my computer and things seem to start down. I uninstalled the program, and everything seems to be working again!

  • Smartphones from blackBerry Desktop Manager is not of Palm Desktop

    I am trying to export my contacts from Palm (Palm OS, Treo 650, Desktop Manager 4.2) for Blackberry Storm 9500.

    The wizard says "Select PIM. Select the software from which you want to import the PIM data"and"Software Palm Treo or Palm Desktop"option is disabled (in gray, no black) so there is no option to select.

    I tried the other ways, such as synchronisation with Outlook or to import a CSV file, but they do not work or they map so bad that cleaning takes a lot of time.

    Any help?

    Hello

    Glad to see that you have solved the problem!

    Thank you

    Bifocals

  • Connection of the Smartphones from blackBerry Desktop Manager problem

    That is the problem. My Desktop Manager does not connect to my Storm.  The PIN is in the connection options and it will connect via Bluetooth, but every time I plug in the USB the Desktop Manager says port still disconnected.  Also, when plugged into the USB port, the storm every 10 seconds or so goes to a white screen that says connection on the desktop, only it doesn't connect.  Anyone have any ideas?  RIM technical support was not able to help with this problem.  My laptop recognizes it as a Blackberry smart phone under USB connections.   Help someone.  Oh, the operating system is Vista.  I don't know if that makes a difference, but I did add the Bluetooth adapter after installing the Blackberry software.

    Understand the problem.  I don't know why, but my firewall was blocking the storm to function properly.  So if someone having this problem also, check your firewall and make sure that the applications can access.

  • Catastorphe Smartphones from blackBerry Desktop Manager and "BOLD"

    I just downloaded the new Blackberry Desktop Manager Mac and synced my "BOLD", then I was stupid enough to upgrade the software on the "BOLD". It was 4.6.0.126... after a while the Office Manager gave me a message that it was unable to complete the upgrade. The "BOLD" ended with a whitescreen, a list of the applications and the 4.0.0.245 BlackBerryPlatform at the top of any time I try to select one from the list, I get a variety of error 'uncaught exception' message etc. When I try to reload the old OS, "BOLD" does not connect (even though my MAC initially recognises there is a plugged USB cable.)

    Bright ideas? up until now, I liked my "BOLD"...

    Exactly the same thing with the new Archbishop Desktop for Mac and a BB "BOLD".

    See

    http://forums.CrackBerry.com/F83/reload-software-507-BB-bold-94113/

    for a way to restore the OS BB (but you need a Windows PC to do that).

    Good luck.

  • Smartphones from blackBerry Desktop Manager 5.0 and hang up Roxio Media Manager

    OK, I spent an hour searching for messages on the forum and not gettting any where.

    Here are the details:

    New laptop with Windows XP - SP3

    New installation of BB Desktop Manager 500_B28_Multilanguage

    I use Sync to update my address book via Ascii one-way.

    What does once.  No problem

    Restarted my laptop.  Now I get Windows Installer looking for Roxio Media Manager.msi and now I can't get rid of it.

    I hit Cancel and it comes back.

    The only thing in Add/Remove programs is Desktop Manager 5.0 and Blackberry Media Sync

    Try to remove one and I get this message 'Installation pending'.

    If there is a problem with 5.0 why is a new version correcting not out?

    Means do a "Clean uninstall" (KB02206) of Blackberry Desktop Software positions, means (KB19218) Windows Installer Cleanup several positions.

    Before I get started, y at - it a real solution?  If I do the clean uninstall and then install 500_B28 I'll hang whenever I start the computer while the installer looking for Roxio?

    Could someone help me please.

    Twas obivous that I was going to get NO HELP from RIM, so I called my IT Department.

    Here's what I've done so far.

    Open the Task Manager.

    In Applications, do a right-click on the RMM install process.

    Left click on go in the process.

    This step puts you on ISUSPM.exe

    Click on end process.

    Click OK.

    Go back to Task Manager, select process

    find misexec.exe

    Click on end process.

    Click OK.

    Go to add / remove programs

    Uninstall the Blackberry Desktop Manager

    Uninstall using DELETE all user settings

    After 15 minutes, finally deletes it on MMR also

    I ran Windows Installer Cleanup Utility (290301)

    verified that no Roxio programs or programs BB were on the computer

    and restarted.

    So far so good.

    Now, I have to decide if I want to put BBDM with or WITHOUT the MM.

  • Smartphones from blackBerry Desktop Manager: error needs to close

    Hi all

    I prowled around and tried to solve this problem, now I ask for assistance at the feet of the masters...

    Simply, Blackberry Desktop Manager has worked well because original install last November.  Recently, I get the popup "BlackBerry Desktop Manager has encountered a problem and needs to close."  Digging for information, it says "AppName: AppVer desktopmgr.exe: 5.0.0.11 ModName: mshtml.dll ModVer: 8.0.6001.18812 Offset: 00209d2c.

    BB Storm (VZW) and Windows XP desktop PC.

    Clarification - the Office Manager will remain until the BB is connected.  The PIN number is displayed when connecting via USB.  In 5-10 seconds the error box appears and the program stops.  If the BB is connected before launching the Desktop Manager program starts, poster PIN code, then the error pops up after 5 to 10 seconds.  Tried USB ports on the front and the back of the PC.

    I followed the instructions elsewhere in the forum to uninstall the Desktop Manager and the settings from the PC, then a new download and reinstall.  No joy.

    I use outlook 2003 (pop3 mail) and BIS.  Yet once, it worked fine until recently.

    I installed on another PC Desktop Manager (identical hardware) and it works very well and allows me to save the BB, no error message.  However that the PC is not my main (with Outlook) machine that I need to synchronize.

    So - what to do now?

    Thank you very much

    Hey there sdgardne:

    Thanks a lot for the suggestions.  I followed your instructions (many markets) described in your message 1256 19/10/2009.  Unfortunately, that didn't solve the problem.

    So I started looking in the updates for Outlook 2003, and in the process, I installed Windows XP updates and has encountered a problem in Internet Explorer (I'm normally on Firefox).  Liquidation of reinstall IE8.  That clears up the conflict BB/DM - no error "needs to close" more and I can sync the BB to Outlook very well now.  Never had the updates for Outlook, which will save for another day.  Only so many times one day Microsoft...

    Be well.

  • Smartphones from blackBerry Desktop Manager asking for Device Manager

    When I try to boot my desktop manager, I get the following message:

    "The Application Loader Wizard requires BlackBerry device manager must be installed.  Please contact customer support. »

    But it seems that Device Manager is installed and running correctly.  It is also strange that the Office Manager window title says "connected - BlackBerry Desktop Manager»

    Then another box opens with the title, "Current task" and it displays the message:

    "Verification of updates of device applications.  Please wait... »

    I can't do anything while it checks updates and pressing the button cancel has no effect.  I end up having to close the Manager program office via the windows Task Manager.

    I tried uninstalling and reinstalling with the supplied CD and downloading the latest version of the desktop on the web Manager software.  I am running Vista Home Premium 64.  Anyone who can point me in the right direction to get my BB works fine on this computer?  (It works fine on my XP computer)

    Hi and welcome to the Forums!

    Since it seems to be so many things, I suggest the following steps (reboots insert a lot of restarting your PC... not only restarts, but at full power down). In addition, it is recommended that you are connected to the PC on an account with full administrator rights. In addition, Vista, use the option "Run As Administrator" for everything.

    (1) remove the package to update your device OS of your PC (Add/Remove Programs)

    (2) properly uninstall the RIM DTM software:

    • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software

    (3) get a new RIM DTM software download:

    • Choose the version which is more recent and (if any) compatible with your PIM (if you are synchornizing via USB):
    • KB12268 Applications supported by BlackBerry Desktop Manager to synchronize

    (4) to download a new copy of your package to your carrier OS device (on your PC):

    (5) install DTM on your PC

    Installation of 6) (also on your PC), device OS package

    (7) start whatever you were trying again.

    If all goes well, who's going to make things again.

    Good luck and let us know!

Maybe you are looking for

  • application 802.11

    Hi all Recently, I started working with the 802.11 infrastructure application with the USRP2953. Without knowing much more about the framework, I need to ask this question: is it possible to extract the logic of the framework and run independently fr

  • Windows vista service pack 2 installation error

    Hello:I tried to install windows vista SP2 via windows update, but it has failed, the error was 80070001. I tried to install sp2 by using the stand-alone Installer, but there was another error has occurred, probably 0x80070005. I even closed all runn

  • How to delete files in need of approval should be deleted? error message: you need permission to perform this action

    Original title: How do I delete the file requiring approval should be deleted? I have download a web reader Cacaoweb & recently just found out it doesn't work anymore. One day the internet browser has become impossible to connect to the server. I tri

  • Error 'TSUVEF.exe' and "TCA.exe" have stopped working.

    Yesterday I stupidly opened an attatchment email and soon discovered that it was a virus, the worst I've seen to be honest, he had allsorts of keyloggers and Trojans to the breast. I installed my anti-virus software that sent the virus and also insta

  • March 2011 the dialog box print Adobe recently becomes too big

    RECENTLY, possibly after agreeing an Adobe upgrade, I can no longer access the button 'ok' in the print dialog box. The box is too large to be completely visible.   What should I do to make things for the parameters I used a couple of weeks.  I made