SMC100 LabVIEW drivers are considered to be "mark Points.

Hi all

I try to install the SMC100 device drivers

The pilots of the SMC100 controller has been developed under LABVIEW 6.1.

So I installed LABVIEW 6.1 also. runtime engine.

I installed the drivers (in the link below) in the file "instr.lib" as requires it.

FTP://download.Newport.com/MotionControl/current/MotionControllers/SMC100/software/

When I open the schema-block (range of functions), the SMC100 pilots are considered question mark as in the joint photo.

I use Win7 32 BIT, LabVIEW 2009, as well as

* My camera always on the way from the USA to the Turkey, so I do not connect the SMC100 device my PC again. Is - this smthg to do with it? Should I connect the device to install the drivers?

Try mass compiled file with the drivers.  If the drivers have been downloaded without the patterns of principle, then you will not be able to compile, because the source code is missing.

Lynn

Tags: NI Software

Similar Questions

  • Can I still change a LabVIEW program even if device drivers are not installed on the computer used for editing?

    Hello

    If I do not install device with LabVIEW drivers can I still change any given LabVIEW program created with this version?  Or do I need to install device drivers if I'm editing a program that uses these drivers?

    Thank you

    Dave

    What you reinstall? The dll is part of the traditional DAQ driver.

  • HP Color LaserJet MFP M277 Pro: No software or drivers are available for HP Color LaserJet Pro M277dw MFP

    Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage

    http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-m277-series/7089945/model/...

    No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

    PS: My OS has been identified correctly in the web page.

    Hi @pisca46,

    Thank you for joining the HP Forums!

    I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

    You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.

    Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.

    If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

    I hope this helps!

  • Satellite A100 and WXP - some drivers are missing

    I received a SatPro A100 and I have Windows XP installed and most of the drivers are installed and working but it is four points of question mark in Device Manager.
    Can anyone help.

    Ethernet controller
    Network controller
    Unknown device
    USB device

    Can someone tell me what drivers to use and where to find them?

    Hello

    Please don't get me wrong, but I really wonder how you want to install correctly on your Satellite Pro A100 WXP.
    Last question confuses me completely. I thought that you got all the drivers of Toshiba, support and download page or maybe I misunderstood something.

    In any case, your laptop is fully supported for operating system Windows XP Home edition and all necessary drivers, tools and utilities that you can find on http://eu.computers.toshiba-europe.com > support & download
    Choose your laptop model and operating system and you will all ready to download stuff.
    A tip for you: if I well remember Toshiba also offers document Instructions of facilities with the exact order of installations.
    So please download and check this list and install all the stuff in this order.

    I assume that you lack driver chipset, LAN driver, driver WLAN and obviously more than that, but I don't know what unknown device is in the list. Can you please send device ID?

  • PCI Device and SM bus controller drivers are missing

    Hello

    Recently I formatted my computer hp 2000-2116tu laptop and reinstalled Windows 7 Ultimate 64 bit. Initially, I found a lot of network drivers are missing. I went through forums of hp support and almost all the drivers are installed except the peripheral PCI and SM Bus controller. I could not find anywhere. In Device Manager, these two devices are projected with yellow exclamation point.

    Peripheral hardware PCI ID: PCI\VEN_10EC & DEV_5229 & SUBSYS_1858103C & REV_01

    PCI\VEN_10EC & DEV_5229 & SUBSYS_1858103C

    PCI\VEN_10EC & DEV_5229 & CC_FF0000

    PCI\VEN_10EC & DEV_5229 & CC_FF00

    Peripheral hardware PCI ID: PCI VEN_8086 & DEV_1E22 & SUBSYS_1858103C & REV_04

    PCI\VEN_8086 & DEV_1E22 & SUBSYS_1858103C

    PCI\VEN_8086 & DEV_1E22 & CC_0C0500

    PCI\VEN_8086 & DEV_1E22 & CC_0C05

    (1) should I install these two drivers also, because now I am able to browse the internet without these drivers?

    If should, please provide the link for the same thing. If you don't mind, pls let me know using these drivers.

    (2) I installed windows 7 64-bit os. My laptop is equipped with a Quad Core i5 processor and 4 GB of ram. These configuration is sufficient to run the 64-bit operating system?

    (3) most video players theinstalled is 32-bit. It is therefore considered that the videos are not so clear before I did the format. Do you have any comment on that?

    Please clarify my above given questions. Thanks in advance.

    Hello

    Yes, you need to install these drivers.

    First of all, download and install the Intel Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56517.exe

    When this has completed, restart the laptop.

    When windows has reloaded, download and install the Realtek card reader driver below.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56545.exe

    Once you have installed the Chipset driver, I would also reinstall the Intel HD Graphics driver on this link.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56836.exe

    Once again, when this has completed, restart the computer and check if your videos look as they should.

    About memory, 4 GB is fine, although you can switch to 8 GB (2 x 4 GB Modules) If you wish.

    Kind regards

    DP - K

  • POUVEZ, NOR-CAN1500, POUVEZ Labview drivers

    Hello

    I am currently using Labview 64 2015 on win 7 64 bit.

    When loading NICAN1500.exe (CAN labview drivers) it forces me to load it in the Program Files (x 86) folder. LabVIEW is installed in Program Files (without x 86)

    After loading it in x 86 drivers folder do not appear in the palettes.

    I loaded twice. Force suggested install NI of CMD did that and still forces me to load it into the x 86 folder.

    Help please.

    BR,

    Florence

    Well well, according to the white paper of OR you can use their drivers CAN on 32-bit LabVIEW only. The drivers themselves are 32-bit... It can run on 32-bit or 64-bit Windows 7, but the version of LabVIEW is limited to 32 bits if you plan to use CAN.

    I'm sorry.

  • CD/DVD drivers are missing and my system is not able to detect the dvd drive.

    Hi, after installing some updates my dvd/cd drive is not detected by the system and the option is not in my computer menu, so I checked in the Device Manager. and my cd/dvd drivers are completely absent and not present in the Device Manager. I m using vista Home premium, help someone
    Thank you

    Hello

    1st reboot and watch again in Device Manager:

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Error code 19 for my ROM... The drivers are up to date... How can I fix it? Thank you...

    I get the error code 19... My drivers are up to date... How to fix this?

    Hello

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Please make all underneath the same if you've done it before as it's often the total of the process which
    solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Normally the above will solve this problem otherwise working your way down through them, even if you did
    them before.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista
    After starting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • I am not able to hear the sound even if my drivers are installed properly in windows 7

    I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
    I have media chip c with creative 5.1 speakers.
    until this works perfectly...
    I am facing this problem since I made a mistake.
    only, I went to run and went into 'msconfig '.
    After that, I marked start diagnosis then applied
    After having no repeat no sound...
    and then I clicked on normal start, but still I can't get my sound help please

    Hello

    1. What is the brand and model of your computer?

    2. this issue occurs when access to a particular file by using Windows Media Player?

    3. do you see red X on the volume icon in the notification area?

    4. are you able to access the files of music from the original location?

    You can follow the suggestions and then check.

    Solution A: For sound program on your computer.

    Method 1

    You can follow the steps listed below:

    a. right click on the volume icon in the notification area.

    b. go to the playback device and right click on the empty area.

    c. Select Show disabled devices and Show disconnected devices.

    d. right-click on the pregnant , select Activate and go to the Properties.

    e. use of the device select use this device (enabled)

    f. click apply and OK.

    Method 2

    Make sure that the Windows Audio service is started.

    a. click on start.

    (b) in the search box, type services

    c. right click on Windows Audio and go to Properties.

    d. Select Automatic from the Startup type drop down.

    e. click on start.

    f. click apply and OK.

    g. restart the computer.

    See also:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Solution B: Due to Windows Media Player.

    Method 1

    You can run the troubleshooter in Windows Media Player.

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2

    You can address everyone on the file.

    a. right click on the file and click on Properties.

    (b) in the Properties window, click on Security tab.

    c. now, click on Edit , then click on Add.

    d. now, type everyone in the box and click OK.

    e. then check the full control box.

    f. click apply and then click OK

    See also:

    What are the permissions?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  • How can I know what NVidia drivers are in el Capitan?

    I'm trying to find the best combination of price and capacity for a video/graphics card to go in a Mac Pro 5.1 running el Capitan. NVidia seems to be the best choice for my type of work, but how do I know if the drivers from NVidia are integrated to the el Cap? I know that there is a possibility of losing the bootscreen, but what video advice may work in a Mac Pro on el Capitan?

    You can download Nvidia drivers:

    http://www.InsanelyMac.com/forum/topic/306535-NVIDIA-Web-driver-updates-for-El-c apitan-implementation to date - 01202016.

    Presence or absence of a splash screen depends on the firmware on the map because during startup, no drivers are loaded. The start screen depends on the firmware on the card. A card flashed to a Mac has a bootscreen

  • I have Firfox 18.0.1. On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

    On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

    I found that my Norton Toolbar had been disabled so I enabled it. When I tried the site it worked. Go figure.

  • R15 reformatted with XP, now the drivers are missing and will not connect Internet

    Hello!

    I got a Satellite R15 without recovery disks. I was thinking that I would do a set but never had him. Recently, I started having problems with my MSOffice 2007 software. I tried uninstalling and reinstalling, but files were corrupted and it did not work. My next step was to buy Windows XP tablet edition operating system. I reformatted and installed the software. However, I had to reinstall 3 times before I was able to get actually reformat my hard drive. The new system is missing the Center help for a reason any and was also the drivers missing. I went to the Toshiba Download Center and I have downloaded every driver/program as possible I might need for an XP operating system and install them all. Some of them would not work because they wanted to connect to the internet. Some of them did not work because miss me a "PRC driver." I also installed service pack 2 for Windows XP, but not service pack 3 because I do not have an internet connection. Initially, the modem, ethernet, sound, video and a few things were not pilots. Now I have drivers for all except one - seems to be to shock absorption software and I can not find anywhere. I need help.

    1. I can not always connect to the internet via ethernet or wireless
    2. I would like to have a center to help once again - I use it once a year or more, but it's good to know that it is there
    3. I'm still not able to install MS Office 2007
    4. I would like to get this software for shock absorption.

    Any advice would be much appreciated!

    The HARD drive works? I ran the test Advanced in Hitachi DFT to ensure is has no bad sectors.

    Install the driver 'Toshiba HDD Protection System' on the Toshiba site. Needs to be installed first, its very important common Modules.

    The Office CD is scratched? It works in the other PC?

    Ultimately, you want a Toshiba Recovery Disc, this way you can be sure that all drivers are installed correctly. I believe you can get replacement of Toshiba drives.

  • When the XP drivers are available for the Satellite A100-599

    First of all, Hi all the toshiba dear family! I came with a few questions then please help me:

    1. which A100 series includes A100-599? (ex: PSAAN, PSAA8, PSAA9..)
    2. when the drivers XP will be available at the Web site for A100-599?

    Thank you...

    Hello

    No one knows exactly release it the time of pilots
    I noticed that Toshiba published new drivers every day and in my eyes, you should check the site of the driver s from time to time.

    As you know that XP drivers are already available for another series A100.
    If you want you can test these drivers and don t worry, damage you the laptop will allow you to install these drivers. ;)

    Good luck

  • Installed graphic drivers are out of date

    I received the message that my graphics drivers are more up-to-date, when I installed a new game.

    My system is a Touchsmart 610-1115uk

    It has Intel HD Graphics driver 8.15.10.2291.

    I use Windows 7 Home Premium 64 bit - SP1.

    When I try to find an update using HP support assistant he says no update available. When I tried Intel they said I should do an update from HP.

    Welcome to the forum.

    There is no update driver for the graphics subsystem built into your computer.  HP is not develop drivers for computers that are more than a year.  HP having their motherboards made to their specifications, you can not use a driver of retail with her.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Satellite A300 - 20v Win 7 drivers are not completed

    Hello:

    As a first step, I would like to thank all employees of Toshiba support for their hard work.
    However, there are a lot of drivers that not supported yet, and they are very important.
    As:

    First of all:

    Touch Pad Driver
    LAN driver
    Wireless LAN driver
    Card reader controller
    Driver webcam

    Second:

    Assist
    TEMPRO
    Utilities SD
    PRO series
    Face recognition
    Tiles for Mobility Center

    Third:

    Silent, Bluetooth Monitor, acoustic Robson, Modem on Hold Utility, driver Modem region Select utility, WPS library, and TRS.

    Please help quickly because they make too much trouble with us (especially for me)
    Because we cannot operate without these drivers.

    Thank you

    Post edited by: MEMO_1

    Hello

    Yesterday, I installed Win7 on my Satellite A300 (PSAG8E) and I'm very happy with it.
    You're right about the pilots, but it is not so difficult as you think. All things missing can be installed for Vista.

    Here is a brief overview of what I did to have perfectly working Win7:

    -Win7
    -chipset driver
    -Storage Manager
    -display driver
    -driver sound
    -modem driver
    -utility supervisor
    -infrared
    -patches
    -configfree
    -VAP
    Hardware - toshiba
    Control - HDMI
    -WLAN driver

    Everything works fine, but some drivers are missing.
    So I added some Vista stuff:
    -toshiba assist - works
    -card reader - installed correctly
    -webcam driver for A500 (wanted to have the latest version) - tested with Skype - works
    -pilot of the Alps - all ok, but no additional options for touchpad

    I hope this will help you.
    If you have any other questions let me know.

Maybe you are looking for

  • start time of 10 min with the network store interface service

    When you connect, the computer crashes to the screen of welcome for about 10 minutes.  I disabled all services of 3rd parties and the problem persists.  I reduced the problem to the "shop network interface service.  When I the hell this service, I do

  • BlackBerry Smartphones Blackberry Torch

    Hello I recently did a wipe of my cloth of blackberry security, and now I can't connect to my e-mail account. I need for the work of ideas on how I can fix this I get a message saying sorry unable to continue your sessions, please connect you again t

  • New disorder creatting records.

    When I try to make a new folder inside another folder by clicking the new folder icon that it won't work. also my new folder icon is no longer available when I right click on my desktop. What is happening and what can / should I do to fix this proble

  • free pc repair

    Hi you know of any free pc repair program

  • Giving users the ability to export reports?

    I have a new user who wishes to export reports, but cannot. There was formerly a place on the screen change the user where you can turn on/off the ability to export, but it is not more. What happened and how can I give this user this ability?Thank yo