Smith E5062A Agilent abacus

Similar Questions

• How to convert a table just to trace the Smith abacus?

  Hi Sir,

  How the read data of R and l of csv file X on the Smith abacus? I have attached the file csv and Smith abacus. Could you please kindly teach me how to convert the CSV in table at right to draw it.

  Best regards

  Victor

  Hi blueface,.

  Did you look at the example LabVIEW?

  

  Concerning

• The use of cursors on the Smith abacus?

  Hello world

  last 7 days, I tried to point some markers on the abacus of Smith.

  Please suggest any method to implement this. I want to score a few points on the smith abacus and get data.

  Thank you

  dg7318

  Got the answer, first of all, we must make the marker (a cross, a triangle or another form), must change its location by changing the index in the array of the impedance. So for each index marker will be a R and X of the specific values, which will be according to the requirement of

  dg7318

• Save the abacus of Smith in JPG

  I use the Smith Multi field VI LabVIEW 6.1

  There is a picture invoke node for the path of the image.

  I don't know if this is what I should use or I'm going down the wrong path.

  I want to save this image on the hard drive as a JPG file.

  Use this property node, then the JPEG File.vi write under the graphics and sound > palette of graphical Format.

• Narrow limit of chart-Smith

  When you design oscillators, I have a negative impedance that I would draw.

  Can someone tell me if it is possible to change the limits of the compressed smith abacus? It seems to be set at-0.5 and -2 real circles and isn't autosize.

  I suggest using a polar graph, they are arbitrarily scalable.  Right click then > chart... properties > tab markers and you can choose display values of cursor/marker on it.  Oscillators, I usually have field amplitude (DB, if it varies a lot) and angle of gamma on in front of a rectangular graph axes.

  Thank you!

• Open lines additional drawing on the Smith chart

  If someone could tell me why the plot of smith, projected in the attached VI has drawn additional ones on a beautiful I would be eternally grateful. If you change the line style to be fair "points", you can see that there is no notes right, but once you show "points and lines" he draws.

  

  I never could solve this problem and also noticed that the smith abacus was very slow with high frequency vectors. I also had to write my own ground visibility check boxes in a ListBox etc and got sick of it. Here is the code for the trace on a XY chart if you wish. I'll probably just set a background image of an abacus of smith and does not allow users to zoom the background image is not zoom in, but it's much nicer than this picture in my view control and very simple.

  

• What is "agile basic error" and why I can't get rid of?

  I tried to place an order with the company of Melitta coffee. Everything is going well until I hit the "place an order" and then comes back the gibberish "agile basic error" and I cannot cross it, get rid of it, and I am never able to place my order.

  This is an error with the server of the Web site. Please contact website assistance.

• low frequency with labview 2010 auto and agilent 35670a

  Hello

  I work on the automation of low-frequency measure a 35670A Agilent. I currently did a program that allows a measurement with an average of FFt given a frequency bandwidth and frequenct from beginning, see picture attached, but I try to measurement of spectrum using this power VI ( ), but unfortunately I can't seem to find how to convert a signal from my block diagram below in order to send the input signal power VI above spectrum X no indication or help will be appreciated.

  
  

• Problem with driver with Agilent 6031 A feeding

  Hello and goodmorning,

  I tried to develop my first application of cvi in which I need to use a power supply (model Agilent 6031 A). I first use direct command of GPIB and I managed to make it work, but with some difficulty, due to the fact that sometimes orders are missed.

  So I downloaded the driver from the website of OR, and I tried to implement in my code. I found a problem with the first statement, the init it. Here is my code:

  ViPSession InstrumentH;
  
  ...
  
  ...
  ...
  
  All = hp6xxxa_init ("GPIB0::5:INSTR", VI_ON, VI_ON, 1, & InstrumentH);

  After running the above code, I found in 'All' value '-1073807339 "and InstrumentH is equal to NULL."

  Any idea and advice would be much appreciated.

  P. S.

  There is a way, as in Labview, to find the explanation of the error Code?

  Found the problem. Food must be set of SCPI commands on the old controls ARP using "SYST:LANG".

• Agilent ENA s3p file

  I'm looking for something fairly simple to generate a file s3p for my Agilent E5071C Network Analyzer.  I guess my greatest need is to find a way to get scanned data.  At the moment I have just set up the 9 tracks (S11, S12, S13, S21, S22, S23, S31, S32, S33) and then configure my markers and take individual measures.  There must be a way to collect a data table on a bandwidth of a trace.  Anyone know how?  Thanks in advance.

  The problem has been resolved relatively easily on mine as follows:

  Use the VISA Write block to send the following strings:

  • : MMEMorytorusNP:FORMat AUTO
  
  
  • : MMEMorytorusNP:TYPE3 P 1,2,3
  
  
  • : MMEMorytorusNPATA 'C:\filename.s3p '.

  The Agilent ENA Series.lvlib:File transfer from storage Device.vi allows to recover the file from the Network Analyzer and store it in a local file.

  Again, I have no problem to find a solution on my own (obviously), nor do I have problems with a lack of support or answer, however, I have a problem with the comment ironic and demeaning.  Please keep to yourself if you do not have any positive suggestions for those seeking honest suggestions and help on this support forum.  Thank you.

• Agilent 33500 B configuration of duty cycle

  I use the function generator to Agilent/Keysigt 33511 B to produce a square wave with offset, amplitude and frequency specified. However, I'm unable to set the duty cycle. Is there a VI to control this setting?

  Hi jmountney

  If you use this driver , I think that there is a function named .vi configures signals Standard Advanced (square) and it has an entry for the duty Cycle, so I think this could help you.

• communication with agilent 33522A

  Hi all

  Please can someone help me communicate with my instrument named below (agilent 33522A)

  What do I need exactly please (drivers, hardware)

  Thank you

  Here is an article in the knowledge base that helps solve your problem of GPIB communication. Have you seen this before?

  http://digital.NI.com/public.nsf/allkb/A80DBFCCAC36EBDE862562C80058856E

  Best,

  Doug

• with Agilent 33522 A data acquisition

  Hello everyone

  When you use the driver NOR-daqmx (for the acquisition of data with agilent 33522A) what material should I use and configure please (map name)

  anything that could help me please

  Thank you

  The cable surrounded in black looks like a USB-GPIB cable. You can use a NI PCI-GPIB and GPIB cable place for as long as you have a PC with an available PCI slot. If you connect via GPIB, you use DAQmx, as Intens said.

• Agilent 8164 Lightwave measurement system pilot b

  Hi all

  I have some problems with an Agilent 8164 b Lightwave measurement system, is there a driver for this device to work with labVIEW?, the Programming Guide it says I should "convert", but I think that this option is available only with older versions of labVIEW (I have 8.6).

  In fact, I am able to see the unit with MAX and perform read, write, and Query commands.

  I hope you could guide me through this and start working with this unit.

  More details:

  -In the course of running on Windows 7

  -LabVIEW 8.6

  -Use the GPIB interface

  Thank you very much in advance for your time.

  -Gozto-

  PS: of course I ask here because there was no driver available on ni.com

  Do not confuse the plug-and-play driver with LabVIEW envelope. Plug-and-play driver (dll, etc.) must be located in the IVIfoundation folder. In the \instr.lib folder should be the llb of LabVIEW functions which are of COLD LAKE to the dll. Attach an image of the windows Explorer you will fix any image.

• IVI agilent Funcgen 33522 B

  Cannot get the IVI driver to work with Agilent 33522 B generator functions. (VISA funktions work well)

  I installed the driver of the IVI - C.  (http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=A1C02CABC2854F97E0440021287E6A...

  It adds a 'driver instruments Module' ag3352x. (IviDriver 1.1 IVI - C and IviFgen 5.0 IVI - C)

  Added a 'logic' and selected name the session "Driver" (ag3352x) and selected the material resource (GPIB0::11:INSTR)

  Tested with the "simulate with" set to the works of specific driver, but when I set it to not simulate I get "0xBFF0015 timeout expired" in LV and TestStand.

  33522B unit switches mode to distance and communication show 2 error: header not defined-113, query-420 UNTERMINATED.

  Is this a bug in the IVI driver? or have I missed something.

  PER DAY

  I got the job of communication. (after trying different drivers and settings)

  It seems to be the name of 'physical' and 'virtual' for 'channels' of MAX's name was the problem.

  The default physical name must be changed to something other than '1', although the Canadian standard requires that the name of the channel is '1 '.

  If it works if I have something like "Channel 1" the virtual name value and then use '1' in BT or Teststand.

  (In Teststand you must change the name of the channel pre-filled (in this case channel 1) to '1')

  PER DAY