SMU 6341 and SCB-68: problem with several entries... * URGENT *.

Similar Questions

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• After 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear

  Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you

  It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.

  If you hear only on one side, who will tell you that is the question.

  If you hear from both sides, you must obtain a new helmet

  Software will fix either of the foregoing...

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• I work in InDesign CS5 and have a problem with the panels on the right. Some of them are empty. Ideas?

  I work in InDesign CS5 and have a problem with the panels on the right. the panels color chart, paragraph styles, and totally blank menus link. I pulled upward from publications that I already worked on and they are still virgins. I tried to load styles from other pubs, ID, and that does not work either. I can see them when I go to create a new style and use BASED on function.

  Any ideas?

  Try to restore your InDesign preferences. Here's how:

  FAQ: How to reset or 'trash' preferences?

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• El Capitan 10.11.4. is safe to put up-to-date and not having problems with Adobe Creative Suite?

  I read a lot of problems with the update of the system of El Capitan, the thought of updating scares me. I use Adobe Creative Suite to work, so it is crucial for me that they work perfectly together. Resolved bugs in 10.11.4?

  Every single major and the Mac OS update brings out the horror stories. Which most is caused by systems that are stuck with rubbish like AV software applications Or really worthless, damaging as CleanMyMac, MacKeeper and other apps that garbage (haxies).

  The only real issue I've seen in El Capitan, which was specifically a problem known BONES was that placing old types of fonts directly in the folder/Library/Fonts /, or their activation in place with any font manager would not work. They had to be put into the folder of the user account or activated as a collected police policies. Which has been fixed in 10.11.3.

  Otherwise, I use most of the CC apps every day (primarily Photoshop). Everything works as expected.

• Hi I'm new to all this, and I have problems with an update,

  I check the update history and I see 'microsoft-other material, Streaming media and broadcast-microsoft lifecam vx-1000' (status - cancelled / importance-recommended / date installed-1/6/2010) I click on it and get an 8024000 error code.  I noticed that my cam works fine when I click on it to take pictures or record, but when I try to use it with my Messenger, it does not show, when I use messenger and start a conversation the other person can only hear me but not see me! Please help me I'm confused!

  Hi kiajoe,

  (a) what messenger do you use?

  (b) the question (the Messenger) took place right after that you got the error code?

  Microsoft lifecam vx-1000 installs automatically without extra software, so I don't think it's a driver problem.

  If you receive the error Windows Update 8024000, it means that Windows Update is unable to read a file (update manifest) that is required for installation.

  To resolve this issue, follow these steps:

  1. click on the button to start the picture of the Start button, type run in the start search box, and then, in the results list, click Run.

  2 copy the following text, and then paste it into the text box run:
  Cmd /c %systemroot%\System32\Spupdsvc.exe Spupdsvc.old ren

  3. click on OK.

  4. run Windows Update again.

  Check if the problem with your Messenger continues once you have solved the problem of error code Windows Update.

  For access to information over the link below:

  Windows Update error 8024000
  http://Windows.Microsoft.com/en-GB/Windows7/Windows-Update-error-8024000B

  You can also do this:

  To download the latest version of the LifeCam software, follow these steps:

  1. Visit the following Microsoft hardware Web site:
     http://www.Microsoft.com/hardware/downloads/default.mspx (http://www.microsoft.com/hardware/downloads/default.mspx)
  2. Click on the software Microsoft internet communications (webcam and headset) products .
  3. In the Select the product type box, select Webcams .
  4. In the Select your product , select your product-LifeCam.
  5. In the Select your operating system , select your version of Windows.
  6. In the Select your operating system language , select your Windows language.
  7. Click OK .
  8. Click on the link to download the latest version of the LifeCam software.

  Aziz Nadeem - Microsoft Support

• problems with several hr2000 + external trigger mode

  I hope someone can me halp on this problem:

  I need to acquire spectra with two hr2000 + and a nirques256 with labview external trigger mode.

  The external trigger mode is done by another pc and also the train of pulpse generator.

  If a trigger after I'm going to generate a 100 impulse every 20ms for each device through a dedicted Council.

  If I only work with ghosts at times things works fine and the system is very stable, BUT if I work with two or three spectres by now I have a really strange (maybe for me) problem with the timeout.

  This is due to an incorrect number of pulses:

  If I work with two device then I need to produce pulses of 200 each 20ms but my spectrometers provide data every 40ms, but I need to equip every 20ms

  If I work with threedevice and then I need to produce pulses of 300 each 20ms but my spectrometers to obtain data each 60ms but I need to equip every 20ms

  Thus, in this way, I lose the synchronization of the three councils.

  An options may be to use a dedicated pc for each device

  I acquire the signal via usb and the problem is maybe duo to the bus

  I think maybe the problem is duo to the vi block! Maybe I can use single istance at times when I call the procedure

  Thank you

  I just solved the problem: it was a problem with reentrancy

  Default LabVIEW use not reentrant execution

• E4200 w 2 - re1000 and still have problems with wireless coverage

  I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

  For my Apple TV and tower PC, PS3, I used a wired connections.

  But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

  Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

  Here is what is a must:

  One SSID in the House

  Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

  Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

  I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

  I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

  Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

  The only unknown is your neighbors (and other sources) Wireless interference.

  You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

  http://www.MetaGeek.NET/products/inSSIDer/

• Magnifier and Narrator of problem with the commissioning

  I am owner of Vista Home Basic and never have a problem with one of the three profiles .when I connect to one

  Profile Magnifier and Narrator automatically even though I disabled all options. can anyone help

  Hello

  Login as an administrator.
  How to activate the Narrator or disable in Vista http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html how do I turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  How do I change the keyboard to the screen on or off in Vista
  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  How to enable Windows features turn on or off in Vista
  http://www.Vistax64.com/tutorials/67732-Windows-features.html
  -------------

  If necessary:

  Disable ease of access button on the Vista login screen
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-ease-of-access-button-on-Vista-logon-screen/

  Ease of access Disabler - free game - a small program that disables the annoying ease
  access key on the Vista login screen.
  http://www.Softpedia.com/get/tweak/system-tweak/ease-of-access-disabler.shtml

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I got a phone call from a benny edwards who said Microsoft and had found problems with my computer.

  * Original title: defraud my computer

  I got a phone call from a benny edwards who said Microsoft had found problems with my computer and the pirates had gotten him. As I have had some problems recently with the computer, I thought it was authentic and fell for it? After a long telephone conversation, he forced me to accept that my Bullguard anti virus and my malware Remover is not enough to protect the computer and forced me to buy a program from Microsoft (this man of course) not microsoft. It supports the remote computer, and then forced me to give him my details, name, address, telephone number and age and of course the fool that I am, my credit card number, the penny dropped when he asked the Envoy of money via western union.  When I told her that I was closing the phone call, he told fort and wiped a number of things from my computer, the computer wasn't sure.  I ran my scanner (twice) bullguard, run my anti malware program, changed my password and order my credit card, is there something more I can do?

  To protect yourself, your information and your PC, follow these steps:

  • Change your computer password, change the password on your main email account and change the password for all accounts, including your Bank and credit.
  • Immediately scan your PC with the Microsoft Security Scanner to see if you have the tools malicious/phishing software installed on your PC.
  • As a third step, I recommend that you run the verification of Security Essentials on this page. The check will ensure that the security features in Windows are normally very active and running.
  • Personally, I have a clean Windows installation, because something could have been tampered with.

  For more information, visit the Microsoft Internet and Security Safety Center

  For more information on how you can these types of phone scams, visit this site.

  I hope this information has helped. Let us know if you have any additional questions.

• Upgrading to Windows 7 HP Pavilion dv6500 and have a problem with the resolution

  OK, here's my problem. I had Windows Vista, has been sick with it. I'm not used to ask someone if I can or can not install some software or OS, so I have two formatted partitions (recovery hp too) and installed windows 7 now, I discovered that he had a lot of problems with the drivers. I have successfully resolved all of them, even my hp legacy works and everything else, except the driver Nvidia. My screen resolution is 1024 x 768 and should be 1280 x 800. I tried all the drivers that are provided in the topic above here (dv6000 - dv9000 update for Win 7 or something like that) also downloaded and installed this driver "179.48_notebook_winvista_win7_32bit_beta", nothing helps worked on this problem for 2 days, am tired and ask for help I need resolution 1280 x 800 on my screen , and I now have 1024 x 768.
  Product: HP Pavilion dv6500
  s/n: CNF7310HBF

  p/n: GT391EA #ABB

  AMD Athlon X 2 and probably GeForce 7 GB video series...

  PS sory for my English.

  Dan or one of the others may be able to help if you post exactly what indicates the error.

  As you say you are not a noob so maybe you need to change something in the NVIDIA Control Panel. Maybe go to the advanced option when you're at NVIDIA.

  Personally when I clean installs I delete, and format the entire disk before installing W7. Doing it this way usually prevents this kind of error occurs. When you use the W7 install disk to format, it may not remove all of the old files registry Vista and can cause problems.

  If you start from scratch once again, this may solve your problem, but there is no guarantee.

  It took 4 tries on my HDX from Vista to W7 to do things.

  I just took a glance at my NVIDIA advanced and under Show options there is an option to "manage custom resolutions. Here I could input what I wanted. What's your has that?