Snapshots fail with "a general error has occurred:
All of a sudden in the last few days, we cannot take snapshots on a handful of our VMs. trying to do so gets to about 90% and finally fails with "a general error has occurred:
Ive done some research and every result I found that included this error had something after the "has occurred."
Any thoughts on how to get more information on this or it can be the cause?
Thank you!
> Regarding CD-ROM, depending on the vSphere client, it is not currently connected:
That's right, but it seems that there is a problem with the location of the ISO file, so please set to "Client" CD-ROM drive just for this spread as possible a problem.
André
Tags: VMware
Similar Questions
-
General error has occurred while trying to run the initial Setup Wizard
Anyone have advice on the implementation of vCOPS? I have deployed the ovf, use a Pool of IP and configure static ip addresses, I get to the login page (https://< IP > / admin) and when running the Setup Wizard initial on the front page of details of vCenter Server I get a message "General error has occurred", which does not allow me to go further. Now, I closed the browser to try again and I get a "Virtual Appliance Repair" screen that also fails with a general error has occurred. Can anyone help solve this?
The vCOPS unit is version 5.0.1.0 build 677931
vCenter is version 4.1.0 build 258902
Thank you
DanLooks like you had a communication problem between two virtual machines.
When you created the IP pool leave you this option disabled? Also, you associate it with the same network that the virtual machines are connected?
-
I can't sign on my icloud account, saying: "check failed and an unknown error has occurred."
Hello buchionunwor,
Thank you for using communities of Apple Support.
I see that you are having problems connecting to your iCloud account. The following article provides basic troubleshooting for problems with your iCloud account.
iCloud: Troubleshooting account
Best regards.
-
Hello
I am a relative to the VI Toolkit novice so apologies if I ask you something ridiculous.
I am trying to save a virtual machine using the VI Toolkit, but get the error "a general error has occurred: failure of ' (seen in the VI Client) when the virtual machine must be connected to the host. I use Registervm_task to perform this task.
Here is the code:
-
to connect-VIServer MyVIServer
http://Reflection.Assembly: LoadWithPartialName ("vmware.vim")
$clus_name = "MY_CLUSTER".
$folder_name = "DR".
$esxcsv = import-csv «.\esx-hosts.csv.
$vmcsv = import-csv «.\vm-list.csv.
$dr_folder = get-view-file-filter viewtype @{"name" = $folder_name}
$clus = get-view - viewtype ClusterComputeResource-filter @{"name" = $clus_name}
foreach ($vm to $vmcsv)
{
+ $dr_folder. RegisterVM_task($vm.) PATH, $vm. VM, $false, $clus. ResourcePool, $null) +.
}
-
If I look in the 'tasks and events' VI, I see the following events:
'Machine virtual myvm is connected' and then a few seconds later "Creating myserver on the host myhost.myfqdn.net in my data center"
I can join the virtual machine manually via the VI Client and confirmed the account that I'm using has permissions.
Any ideas or suggestions would be welcome.
Kind regards
Jamie.
If the problem persists, could perhaps include a sample of the content of the two CSV files?
-
(Officejet J6480 all-in-One, PowerMac G5, Mac OS 10.5.8, wired ethernet/WLAN) Sweeping the window stopped working and gives message: 'error. Sorry, an unknown error has occurred. "That's all. I can always scan the ScanPro application if I run first of all of the computer, but nothing of glass - i.e. manually, using the buttons on the control panel of the camera itself - to one of the destinations, I tried (PDF preview.), JPEG, HP Photosmart, etc..
I uninstalled the software suite HP, reinstalled (latest version: 9.7.1), and engaged in the installation process, it has been completed successfully. But no change in behavior.
I tried the procedure in a similar position:
Re: Officejet J6480 all-in-One, scanning does not work anymore
21/02/2010 19:02
OK, one more not - we will reset the printing system: right click - Sys Prefs, Print & Fax - (control) the area of the print queue and select Reset printing system. -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.
.. .but the behavior of my printer has not changed, and the error message is still the same, when I tried to scan from the glass. Any help?
Hi @jcoronat,
Welcome to the Forums of HP's Support. I understand that you get an error when you try to scan. I would like to help.
I took most of these steps from a post of Sunshyn2005. To be honest, all I did is to change the links to software, but the post is enough onsite for troubleshooting of Mac software.
Scrub / uninstall
- Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
- Click continue, click on one of the printers in the list.
- * Only perform this step if you have not all other HP printers. Press and hold the Option, control and command, while now the three buttons.
- Click Uninstall.
Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.
Move the files or folders to the Recycle Bin, drag and drop
- Macintosh HD/Applications / /Hewlett-Packard folder
- Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
- Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
- MacintoshHD/Library/Frameworks/HPServicesInterface.framework
- MacintoshHD/Library/Frameworks/HPSmartX.framework
- Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
- In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard
Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.
- In Macintosh HD/library/printers/hp - delete the folder
- In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
- In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
- In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
- Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.
Close all open windows.
Turn it back on.
Empty the trash.Reset the printing system
- Click on the Apple icon ( ), then click on System Preferences.
-
P2V conversion failed to 95% a general error has occurred: Reconfiguration failed
Try to convert the laptop HP dv2000 WinXP home.
Here are some of the errors in the logs. Any help would be appreciated. My search resulted in little things.
Was a warning in the journal highlights: failed to refresh the drive letters for the layout of the target volume.
===========
error impossible to extract the media type for
? \VOLUME{380506fc-2ddd-11db-b221-806d6172696f}\: incorrect function (1)User agent is "VMware-client/4.0.0".
===========
Number of partition: Invalid magic sector.
Disk number 1 were ignored due to errors when reading partition table
Number of partition: Invalid magic sector.
Disk number 1 were ignored due to errors during playback of dynamic disks header or LDM database is corrupt
Number of partition: Invalid magic sector.
Number of partition: Invalid magic sector.
Number of partition: Invalid magic sector.
Number of partition: Invalid magic sector.
===========
Directory creation error using CreateDirectoryEx: cannot create a file when that file exists already (183)
===========
Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
. \vstor2-mntapi10-374D384D007E00000000000001000000
WINDOWS\system32\config\SYSTEM under the name of the mntApi286208973830050397 key.Unable to load the registry hive
. \vstor2-mntapi10-374D384D007E00000000000001000000
WINDOWS\system32\config\SYSTEM, error 0 x 3.Could not open the registry hive, MNTAPI_ERROR = 50
Cannot open the system registry hive. Preserving jump drive letter mapping
===========
Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
. \vstor2-mntapi10-374D384D007E00000000000003000000
Boot\BCD under the name of the mntApi300615223830050397 key.Unable to load the registry hive
. \vstor2-mntapi10-374D384D007E00000000000003000000
Boot\BCD error 0 x 3.Boot.ini file read error
. \vstor2-mntapi10-374D384D007E00000000000003000000
Boot.ini===========
default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
"multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Edition family "/ noexecute = optin/fastdetect
ReconfigurationTransaction: volume of comments system caching
Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
.\vstor2-mntapi10-374D384D007E00000000000003000000\WINDOWS\system32\config\SOFTWARE under the name of the mntApi301193348830050397 key.Unable to load the registry hive
.\vstor2-mntapi10-374D384D007E00000000000003000000\WINDOWS\system32\config\SOFTWARE, error 0 x 3.50 error when you open the software hive
Cannot read the news of the OS on the system disk: 50
LocalPathToGuestSystemFolder:
.\vstor2-mntapi10-374D384D007E00000000000003000000\LocalUndoFolder:
.\vstor2-mntapi10-374D384D007E00000000000003000000\$reconfig$Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
. \vstor2-mntapi10-374D384D007E00000000000003000000
system32\config\SYSTEM under the name of the mntApi301224598830050397 key.Unable to load the registry hive
. \vstor2-mntapi10-374D384D007E00000000000003000000
system32\config\SYSTEM, error 0 x 3.Cannot access registry SYSTEM comments, error 50
The C:\WINDOWS\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory cleaning...
TaskImpl failed with MethodFault::Exception: vmodl.fault.SystemError
RecordOp add: event [9], task-1
ConvertTask updates, States: 4, percentage: 95, xfer rate (bps): 1615946
GetEvent (taskID = task-1) task converter
SetError (taskID = task-1) task converter
Completing the task-1 task with State = 3
===========
Error 1 setting SFN
===========
Try the Converter 3.0.3 - which seems to be a bit more reliable
___________________________________
-
I already downloaded the drivers and programs I thought I should use LabVIEW to control the NV40 - 3CLE Piezosytems Jena but when entiring any command and run the vi, this error message appears in the source. I have no idea where to go from here.
I'm pretty new to LabVIEW, so any ideas or recommendations would be appreciated.
Thank you
Dkeefe and confused
First of all, make sure that the com port is listed in MAX and it really belongs to your instrument (unplug the USB cable and see if the port goes away). Then run the connectioninit function.
-
do not know what is happening on the newspapers seem meaningless to me (sorry, but yes I am a newbie)
where to start? I have another server, same OS, same subnet and VM even host it worked
SO safe to say something with this server. I stop all unnecessary services, is going to run a chkdsk now
any ideas o respected gurus in the VM world?
Thanks in advance!
Your problems are more than one (bootable) partition active. Leave that one active partition on the source (on all the disks to be converted) computer, and then try again. HTH
-
Then the documents library box Monte showing *.xps file name. Help!
Thank you both for your responses.
It turns out that I uninstalled my printer and then reinstalled and also unplugged my USB cable to the printer for a short period. Now, I'm good to go!
-
I don't know why is this error?
I got an error that the virtual disk space was low tool and my vm has been automatically turned off. I scoured the data store and I saw old clichés that were very important which could be removed.
I went into the Snapshot Manager and has tried deleting them and started getting the error msg.snapshot.error - NOTFOUND.
The clichés that I deleted since the Snapshot Manager always appear when I browse the data store, but are locked.
I really need to be able to consolidate these pictures in the parent company. 100 GB free on the store of data right now.
If I try to take a new snapshot it fails and says: an error has occurred when taking a snapshot: msg.disklib.OPENPARENT.
I also noticed after the fact that my hard drive is pointing to the most recent snapshot rather than to the parent.
I think if I edit the .vmx file and change it so that it points to the parent would be the load, but then I will not lose the clichés?
I like to keep at least the most recent roll in parent company snapshot.
Any ideas?
Thank you!
Erin
Hello!
Thanks for the reply. Unfortunately, a part of the problem is that the data store was running out of space. If I didn't have space or time to try a clone.
I did a reboot and after that has been able to update the CID to get the right string after I changed the hard drive to point to the base file, power, created a snapshot, turned off and pointed to the hard drive in the last snapshot.
But there was a corrupt, one in the list since my VM corrupted after all the snapshots consolidated (+ 6 hours later).
I didn't have a lot of time to continue to troubleshoot or try a clone on another virtual server, we have little space so I started from scratch.
Fortunately, I discovered that my backups of the data have been very well, I so reinstalled Windows and started from scratch.
Thanks for the suggestion though!
Hope this helps someone else because I just watched as he went to work, and I don't know if a clone would have gotten it going or not.
Erin
-
Use an existing drive - failed with the General system error
Hello
I have a 5.0 esx host. as soon as I created a virtual machine and installed an operating system.
Now, I want to have another exact copy of this virtual machine.
what I've done is therefore:
- copied hard and flat-vmdk vm1 files in another data store.
- in the Wizard "Select a disk" has created a new vm2 and chose to use the existing virtual drive (chose the path where I copied the vmdk files).
- When I try to turn on the vm2, it fails with "does not illuminate: General error has occurred."
What Miss me in the configuration.
Please note that I have so not vcenter server cannot use cloning option.
Thank you.
You will find may be easier to use the functionality to export the OVF template and deploy OVF model in the vSphere Client. Export the virtual computer off and when you deploy the same VM you can rename and choose the destination data store. The configuration will be supported and then you can customize just the required guest OS.
-
Hello. Pls I just got the error "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception occurred" when I tried a test package ' Helloworld ' procedure follwing illustrated app on "http://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html."
I need your help pls.
Hello!
Thank you for your response. I uninstalled "jdk-7u25-windows-i58" and got 'jdk-6u35-windows-i586', and his work well at the moment. I hope that I have no problem to use an older version.
-
I tried to update my iPad for iOS 9.3.4 iOS 9.3.5 directly since the latest version of iTunes on Macbook Pro running the latest update of El Capitan. I tried the update of the iPad without iTunes, but he failed and showed the photo to connect to iTunes.
The update failed to halfway through (don't remember the exact message) so I unplugged the iPad, restarted iTunes, and tried the update, but the update constantly fails with the message "an unknown error has occurred (52). I also tried via iTunes on my iMac running Yosemite, but has not as well.
I did all the things listed here:
https://support.Apple.com/en-us/HT201210
The iPad was working fine before the update attempt.
Is there than anything left to try? This iOS update broken my iPad?
Have you tried to put the iPad into recovery mode?
If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports
-
Original title: Command and Conquer Generals error? Some one care to help?
So now I'm a little disappointed in how things are going right now.
I had Command and Conquer Generals before and I used to read. Bug of the game problems are forcing me to remove it. To make things worse, my PC has been infected with malware/spyware that sneak their way inside my C & C Generals App. I did a full scan using Spy Bot Search & Destroy alongside with MalwareBytes Anti-Malware.
Then, I tried to re - download and installed a CLEAN one. However, when it loads the classic C & C Splash Screen(the loading page that appears before the game turns into a full screen app), another windows appears and displays this:
"TECHNICAL PROBLEMS".
"Sorry, a serious error has occurred."After the application closes, and happens whenever I start the game.
Can someone help me?
I don't know what's happened since she was working before.
I do weekly maintenance using Auslogics Boost Speed 5 and Systweak Advanced System Optimizer 3.
System Specs:
Microsoft Windows XP SP3
Intel Pentium IV CPU 2.00 GHZ
256 RAM
Radeon 7000 / Radeon VE Family (Microsoft Corporation)Every effort to answer my question will be much, much, much appreciated!
I'll make sure that you have all the patches that are underway for the game Command and Conquer Generals.
http://www.GameSpot.com/PC/strategy/commandconquergenerals/downloads.htmlIf you have access to a library and a flash drive, you can download Microsoft Security Essentials or any other antivirus disk analysis software and then install on your computer even if you do not have access to the internet.
This will help make sure that you have cleaned your computer properly.A system restore back to a point in time so if you have installed all new programs since the date of the restoration of the system, you won't have any more of these programs installed.
I don't know any other software in system restore, but you can do a search on the internet, however, they can only restore from when their software is installed.
I hope this helps.
-
I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.
Since yesterday, I was not able to import any movie that I get the following error
an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links
Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.
I tried the following1. a different memory with a new registration card
2 removing and re - import an old movie
3. to remove and re-import and old movie created by another camera
4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -
5. upgrade to El Capitan to see if maybe OSX update may help.
None of them had no effect, can anyone help?
Hello
You're welcome ShawWellPete, I thank you for everything.
Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)
Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld
There could be some service startup that is in conflict.
Concerning
Jitendra
Maybe you are looking for
-
Is there something wrong with my version of Microsoft Visual Studio, which causes the update to not settle?
-
How to set the input frequency output rate linearizer function
I have an input range of 0 to 2000 Hz with a digital meter. I need to convert the signal in gallons per minute (GPM) using a non-linear process with 10 points on the scale. Here are the 10 points of the scale. In display 0 =.64 Hz DSP0 INP = 0.001 ga
-
try to install windows xp on a Virgin system
I have a clean hard drive and received two disks of windows xp install before I can use the computer. I loaded the first cd but get nothing on the monitor for tell me when typing in the key code. any suggestions?
-
DeskJet f2280: acanning on deskjet f2280
I'm at the end of my home! The document is very important to analyse today. The printer installed, print very well. Tried scanning and light just flashes. Using windows 7. Through troubleshooting and still getting nowhere.
-
the folders under vista copressed
Some how I changed the properties of the files compressed, my options are limited to word, explorer, wordpad... What is the default properties for the compressed files? I tried Explorer and when I try to open the existing file it creates an infinite