Snow Leopard & C4588: how to reset the printing and scanning system.

Similar Questions

• C5150 - how to reset the printer to clear the network password?

  I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

  I guess that you did not read my * last * post here, which has been designed for you. in any case...
  
  PhotoSmart C5100
  -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
  -Press "OK".
  Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
  
  TO MAKE RESET "Half full" in the HELP MENU:
  
  -Use the > to scroll to 'Resets the Menu' and press 'OK '.
  -Put "Full Semi" highlight Reset and press 'OK '.
  -Unit will shut off by itself in 3-5 seconds
  -Power and then turn it back on by button / stop
  -Leave the print alignment page - do NOT cancel
  -Allow to go through maintenance and Photosmart screen (normal)

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• I have Photosmart 5580. When I switch to the power I get the 9995F886 message. I have reset the printer and error

  When I switch to the power I get the 9995F886 message. I have reset the printer and the error disappeared. What is this error message? How can I delete it for good.

  bedamax,

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• Want 7640: Must be able to use the print and scan doctor for each print job to get printing to work

  After works without any problem for several months, the printer now shows an error message whenever I try to print. I have to run the doctor print and scan so that the printer to function. The first time this has happened, he told me I have to uninstall and reinstall the program, I did. Since then, only the works of doctor print and scan running, but he running for each print job is not acceptable!

  Hi @Doug18,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print, except if you first run the PSDR. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you have received the order to uninstall and reinstall the software that you have. When you now run the PSDR, she says you? I need to know the results (of the error messages, patches, etc.)?

  In the meantime, try the steps in these guides:

  • Printer is offline (Windows)
  • Print jobs stuck in the print queue (Windows)

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• How to reset the date and time

  The year and the time is more correct then faxes be recorded accurately.  How to reset these?  It's my 8600 Officejet Pro.

  Thank you... it was driving me crazy and I couldn't find it on the indices to help HP.

• my router cannot find my printer printer how to connect the printer and the router?

  I'm new to computers, as you probably know, and I think it has something to do with the IP address on the prienter.  But that'sd just a guess.  Any help please, it's probably something simple, but I'm clueless as to what to do

  What is the make and model printer?

  No doubt you want to configure for wireless connection, and if so did you use the printer installation cd?

• How to reset the address and the password for admininistator in windowsn 8

  I made a mistake in the email address for my admininistator on windows 8 so now cannot connect and have forgotten my password.
  How to change that?

  Hello

  I'm happy to help you with your concerns about resseting password to your admin in Windows 8.

  We need to clarify your concern if you are referring to the administrator of your computer with the Windows 8 operating system or using your domain name in Windows Live Admin Center.

  We look forward to your response to the address you correctly.

  Thank you

• How to get rid of the black lines on the printed and scanned documents

  When I print, copy or scan on my officeject 6500 wireless I get a black line to the bottom of the page.

  While I wait for your answer, I'll post the most likely cause:

  Lift off the cover.  Now lift the document feeder cover, it opens to the left. You will see the mech feeder, you want to raise that to the left as well, it will increase by 2 inches or more. See this article from underneather glass it? Clean it. Really good.

  Then see you the white piece of plastic above the glass, which clean really good too.

  If it is a perfectly vertical line, in that it's probably caused by some dirt here, what is happening is the seat of bulb scanner in one place, the paper is then slipped over in the same place. If there is a grain of dust, it covers the entire page, top down. You clean the white room because there might be dirt there, when the bulb shines through the paper, he thinks returned as a dark spot.

• How to cold reset the printer Laserjet M175nw MFP Color 100?

  Try changing the settings wireless, but keeps on asking for a password that I don't remember.

  Printer works fine so hard connected to the network.  ePrint works very well.

  Just updated to the latest firmware available.

  I just need to change the wireless settings that I recently changed my password for wireless network.

  In addition, access to the menu is disabled from the control panel of the printer.

  So the only way that I can think of is to reset the printer and start the installation from the top.

  Thank you.

  Hello

  You must perform initialization of storage generally in order to remove the password configured in the fuly, any other reset will not erase this kind of configuration.

  In order to perform this reset, you should contact HP Support.

  You can get the details to contact HP by selecting your region and following technical support after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Kind regards

  Shlomi

• How to set the parameters of scanning on Officejet 6500 connected to a Mac?

  I'm trying to scan documents and pictures using the following:

  Scanner: HP Officejet 6500 E710n-z all-in-one
  Computer: Macbook Pro retina
  Operating system: OS X mount Lion
  Application: "HP Scan" (this application was provided by HP)

  Whenever I have analyze anything, it comes out in grayscale at 300 dpi resolution.  At least, this is what HP Scan tells me when I click on the "Info" button in the lower right.

  I would like to be able to scan things in color rather than just in grayscale, and I wish I could choose the resolutions other than 300PPI.  But I looked everywhere in the graphical interface of the HP scanning application, and I can't find anywhere to adjust these settings.

  Did anyone here know how to change these settings?

  Unfortunately, the link you provided is a version of the software much older than what I have currently installed.

  HP_Installer_Inkjet_Full_Group02_10.3.dmg was published on 14/09/2009, and it is intended for OS X 10.6, aka Snow Leopard.  When I installed the printer installation CD had software pretty much at this time, and he refused to install on MTN. Lion.  Instead it asked me to download the latest version from the HP website.  What is installed on my machine is a file named HP_Mountain_Lion_Ink_SW_v12.23.18.dmg.  Unfortunately, I neglected to save the URL I downloaded from, and I can't seem to find him.  But I saved a copy of the .dmg file in case I ever need to reinstall.

  Meanwhile, I managed to find the answers on my own.  Part of my problem is that, although I'm fairly familiar with Linux and Windows, I am new to the GUI of Mac and his metaphor interface and GUI desktop is different, enough of these I'm familiar with what my instincts are sometimes not a lot of help.  Then, it took me days to notice the only critical button that made all the selections, I was looking for visible.

  HP Scan DO allows you to set things like the Type of Scan (photo or Document), Mode (color, grayscale, black & white), resolution and a number of other parameters.  But we must first click on the "Scan" button... ", and then click on the widget of the arrow to the right of the selection of the Scanner.  By clicking on the arrow pointing downwards in fact all other settings appear.

  If you change the Type of Scan of photo of the Document, it automatically changes color in grayscale Mode, which does not want to create a color PDF.  But you can change the Mode back to color.  And you can save this document as a PDF searchable to call the I.R.I.S. OCR software on it.

  To create a multiple page PDF, or let the software analyzes all sheets in the document feeder, or place another page on the window and click on the button 'Add' in the lower left corner of the window, how it displays the same dialog box that is displayed when you click 'Scan '. ».  You can click on the arrow down and change the settings for each page or leave them alone and they will remain the same as the parameters of the previous page.

  When you have analysed all the pages that you want in a single document, click 'send '.  This displays the usual selection of files box.  At this point, if you set the 'Searchable PDF', or 'PDF' format a checkbox will appear marked "save all items in a single file.

  Thus, it seems that HP Scan works with MTN. Lion, it provides all the features that Capture of Image and seen I.R.I.S. integrated in it, it provides OCR features that Capture of Image is not.

• How to set the date and time so it appear on my fax

  I sent a fax today and the report that was printed after ward did ' t have the correct date or time - how to reset the time and date on the HP officejet 6500 has more all-in-one.

  Thank you!  How simple. Here the help section on HP could help.  I must have spent over an hour tring to figure it out on my own and search on the HP website.  Now, I know. Thank you once again!

• "Failure of the printer: there is a problem with the printer or ink system" message

  I get printer error message on my printer Officejet 6700 Premium.  I'm on a Mac OSX 10.9.2.

  I have reset the printer and I tried to update the firmware by the instructions, but he tells me that the device is busy and won't.  The printer is out of warranty but was hardly used - less than 200 printed pages - UGH!

  What can I do else?

  Hi Embie2014,

  Thanks for letting me know you are using the HP cartridges No.

  HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridge not HP, or filled HP cartridges. If you use genuine HP, the following cartridges no could not solve your problem of print quality.

  A "cartridge problem," "ink cartridge failure," or "Incompatible cartridge" Error Message appears on the all-in-one.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document explains how to clean the print head.

  Thank you.

• HP Officejet Pro 6830: Get the printer and the message "the printer into an error state" will not be printed

  Just received this printer refurbished HP 2 weeks ago to replace the one who had a problem with printhead.  Printing worked initially, but now I get the message "the printer into an error state" when I try to print.  The screen at the front of the printer automatically turns off as well, as he is extinguished.

  Hi @M45,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print because the printer is in an error state. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to do a hard reset to see if that will solve the problem.

  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  3. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).

  If there's an error message displayed in the menu on the front panel, before the display of the printer turns off?

  Please download and run the print and Scan of the doctor, it will be probably diagnose and fix the problem you are experiencing.

  • What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?
  • Click here to update the firmware of the printer with a USB connection.

  If you have completed all the above steps and your product still has a problem, service the product.

  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  I hope this helps. Please respond if you have any questions. I wish you a nice day!

• HP Deskjet 8500 has all-in-one: printer printing and scanning in black

  Printed OK yesterday. Today it is printing full black pages, on black settings and color.  Also the complete black page scan.  Has been at rest - not off.

  Hello!
  Welcome to the HP community @ebe7fos,

  I read on how your prints and scans are now completely black when you use your Officejet 8500 printer and wanted to drop to help. Try the steps and answer all the following questions please and responds with the result, and we can go from there if necessary.

  Reset the printer and make sure it is plugged directly into a wall jack, avoiding the power and surge protectors toolbars:

  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  1. How the printer is connected (USB / wireless / wired / Bluetooth)?
  2. Did you test functionality of the hardware (made copies) and they work successfully?
  3. Have you tried printing from different programs?
  4. Have you tried to uninstall and reinstall the software?
  5. Run the print and Scan Doctor and understand the results.
  6. Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  7. Have you tried using a different USB/Ethernet cable?
  8. You see messages of error codes and if so, what they say and where do you see them?

  If you have trouble, let me know and I'll do my best to help.
  
  Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!
  
  We wish you a wonderful day