Snow Leopard prints to CP4005 - except it prints multiple copies

Similar Questions

• Photosmart D 110: Print multiple copies

  When you print multiple copies, it takes a lot of time between the copies.  I'm queue and print immediately.

  Would like to have the copies to be printed one after the other

  reinstalled with the latest version of the software and it's fine woking Thanl you so much Bill

• OfficeJet 5740: Windows 7 Officejet 5740 prints multiple copies of Excel (2000)

  Nine Officejet 5740 e-all-in-one printer connected to the Acer PC under Windows 7 Pro (64 bit) SP1. Printer driver 17.59.00.6180

  Will not print multiple copies of a small document (2000) Excel (128kb)

  Print large files PDF and Word and several copies, but not from Excel (2000)

  It will be wound up to two (maybe three copies) but displays only the first and then fails with the Excel error message "your file could not be printed due to an error on HP Officejet 5740 Series (network) on Ne01...". »

  Followed by the HP error message «Unable to communicate with the printer...» »

  I think it must have something to do with the way Excel print multiple copies queued several unique copies that print spooler one by one. It feels as if the spooler is being overwhelmed by the simple copies repeated being pulled on her by the Excel print routine.

  Any advice appreciated

  Greetings @tessdesigns,

  Thank you access the Forums from HP Support for extra support! I see that you have problems printing multiple copies of Excel. I will do my best to help you with this problem.

  The application you are printing from, go to file, print, number of copies, select 2. Uncheck the Collate box. You can now change the number of copies. Collate should now stay disabled.  Try to reprint the document of several pages.

  If the problem persists, perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows. Then try to reprint the multiple documents.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Print multiple Copies per Page?

  All I want to do is print multiple copies per page.  I use the parameter "Borda (x 4)" in the Canon Print Studio Pro software.  I can see how in 6 of Lightroom, but my son is running only Digital Photo Professional 3.14.48.1 with a Pixma Pro-100.

  All we get is just an impression in the top left corner of a landscape layout.  We use paper 13 x 19 and can print images of size on the paper without problem.  All we want is to print multiple copies of the same image on a single sheet.

  You can use My Canon Image Garden (free download)

  

• HPC309, print multiple copies, even if only is selected.

  HPC309, while a printer, print multiple copies, although only is specified.  MOM has Windows vista 32 bit.  I had found the answer here for printer to my mother a few years ago, but think that my niece may have changed the settings I applied the solution that had been posted here.  The solution offered of course worked all these years and now must go MOM up and run again.

  I think it had something to do with the implementation of a HPC309 (2) or something along that line.

  Thanks for any help you can give me.

  Uncheck the box "Enable bidirectional printing" on the C309 properties Ports tab.
  Go to the Printers folder - right-click on the printer - in the menu drop down, right click on printer properties

• OfficeJet Pro 6830: Can't print multiple copies with my new 6830 Pro of Officejet

  I installed my 6830 and have updated the drivers.  It is on my home wifi network and works well.   All functions work perfectly, but when I try to print multiple copies by selecting the number of copies in the print dialog in Adobe Reader, MS Word and MS Excel, all I get is a copy no matter how much I said.  (This is probably true of other software, too, but these are the only ones I've tried so far).  This makes print multiple copies very tedious.

  Why it won't print multiple copies, and how to fix it?

  Welcome to the HP community @JoetheGOM ,

  I read your post about how you cannot print multiple copies of your Mac 10.7, running to your Officejet 6830. I have some suggestions for you below!

  Try these steps in order:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the complete driver here: HP Officejet Pro 6830 e-all-in-one printer
  5. Repeat your impressions.

  If you cannot always make several copies, try posting this question in Apple Support communities.

  Have a great Monday

• Cannot print multiple copies of Word or Adobe

  Cannot print multiple copies of Word or Adobe (although Notepad works very well, she accepts the demand for multiple copies)

  Windows 7 Ultimate

  This is the next thing I tried...

  HP Laserjet M1005 MFP printer

  Problem: print one copy and ignore the rest of them

  1 mopier moye... There is no mode mopier on my device

  2. adjust the printer to print directly.

  3 re install the driver

  4. update the firmware

  5 restart the spooler and in her service automatic setting

  6 deactivation of advanced print

  7. buy a new printer

  My new printer is Canon LBP 3300

  Problem: His little different than Hp, now when I try to print multiple copies, it does print none of them...

  The two printer works fine with other computers.

  Hi Nitin,

  You mentioned that the mopier mode setting is not available for the printer. You can check if there is a possible working storage?

  Here's how to find one:

  • Select StartControl Panel<>Printers.
  • Right-click the desired printer icon and select printer Properties.
  • Select the device settings tab.
  • Find settings for storage of the work at the end of the list. (Check if the mopier mode is available in this setting. This setting could also be under "Installation Options").
  • Change the settings for active to disabled.
  • Click apply and OK.

  Check out these links for other procedures for troubleshooting related to the issue:

  http://h30434.www3.HP.com/T5/other-printing-questions/LaserJet-won-t-print-multiple-copies-on-Windows-7/TD-p/181367

  http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-1320-not-printing-multiple-copies-anymore/TD-p/1125929#.U9eO3eOSx0U

  You can also disable ranking for the printer:

  1. Go to file > Print > collate box.
  2. Uncheck the box for the collate box.

  In addition, when you try to print a document, launch the document in administrator mode. For example: right-click on the word and select run as administrator of mode.

  Please let us know if the problem still persists.

• HP 4630, how to print multiple copies of a picture on a single page

  I have a Toshiba laptop with Windows 7 and a HP 4630.  I want to print multiple copies of a picture on a full page.  What HP application need me it, and how I put in place?

  Hi Dore71,

  Welcome to the HP Forums!

  I see you try to print multiple copies of a picture on a full page.

  I recommend you take a look at this web site. Picture printing: frequently asked questions.

  Hope this information helps and have a great day!

• Cannot print multiple copies from Excel. Also impossible to update HP driver. The update of the Microsoft HP driver fails to install.

  Windows 7 + Office 2007 with HP 1200 LaserJet printer: unable to print multiple copies of Excel documents.  Also impossible to install the update from the HP Microsoft driver.  Windows Update indicates the updated driver available... but fails to install.  Everything was stable and works very well.  All other printing works very well (including multiple copies from other programs like Adobe etc).

  Any help will be appreciated.

  Hi Rolloutman,

  ·        What happens when you try to perform multiple copies of Word?

  1. to narrow down on the issue, I suggest you to print several copies of a Word document or notepad.

  2. provide the error message or error code for the problem to install the updated driver, follow these steps:

  i. Click Start, in the search box, type in update

  II. click on windows Update

  III. click view update history

  IV. double-click Update failed

  3. update the printer driver to manually. Steps to update the driver:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the printer and right click on the sub element and click on update driver.

  Link for reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also check out the link below:http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29790&locale=en_US&taskId=135&prodSeriesId=29789&prodTypeId=18972

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot print multiple copies at the same time

  What should I do to make my printer to print multiple copies of a page

  Hard to say based on the small amount of information that you give. Visit the website of the manufacturer of the printer and ask their assistance or their forums.

• Software Adobe reader prints multiple copies of documents in the wrong order: 11 22 33 instead of 123 123

  When you print multiple copies of the same document, printing output is always Page 1 one on the other, the whole, Page 2 stacked ETC. Example: Print 5 copies of a 3 page document, it will come out as 11111 22222 33333 instead of 12345 12345 12345, this has been the case with reading 8-11 and also DC

  Hi Vanessa,

  Your printer can sort multiple copy tasks. For example, if you print two copies of a three-page document and you choose not to collect them, the pages printed in the following order: 1, 1, 2, 2, 3, 3.

  Make sure that you check the mark before printing.

  

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• How can I access utilities for PS8250 using Snow leopard printer?

  I used my PS8250 with OS X 10.4.11 for 3 or 4 years. I access the HP photo utilities to verify supply levels, align new ink cartridges, etc.

  Now, I have a new Mac Mini with OS X 10.6.7 and I can't find my set of utilities print so I can do it. I checked HP downloads and told me that the drivers were included with Snow Leopard, and they are with the exception of the set of utilities with power level control.

  Any ideas?

  -Joe

  Unfortunately, this network configuration does not use the utility - it does not work for printers shared via another computer.

  It only works when it has a direct access to the device: printer must be connected to the network through its internal network card, if it has one, or directly to your mac via USB.

  Utility should work on your G4, if you have it installed there.

• OfficeJet J4550 with Snow Leopard - printer does not

  I have recently upgraded to Snow Leopard, and had trouble with scanning on my officejet J4550 until I read the posts on this forum, downloaded the recent update and learned to go to preview or Capture images. Now I can scan, but I cannot print. After sending a job to print, the print queue indicates that the status is "completed" - but the work has never been printed. What should I do?

  Reload the ' bad software (which for pre - 10.6), then uninstall it by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• my iPhoto will not print multiple copies of a photo.

  I'm under o/s10.7.5 and iPhoto 8.1.2 version.  I've selected my photo and chose to print on the file menu.  I select the contact Board on the menu of the icon to the left of my picture. A small picture of my photo appears on the preview.  Layout page or column options had no effect and when I print only one tiny copy of my photo is displayed.  Of course, I'm in the middle of a project to date limit for which I need this feature!

  I have not use iPhoto 8 for a very long time, so do not know, is that it is valid.  With the current iPhoto 9.6.1 duplicate a photo as many times that the copies are required on the printed sheet.

  

  Select the copies, and use the Contact sheet available:

  

  Or use the custom layout and set the size to get the number of photos per page you want:

  

  NOTE: The key is to duplicate the image as many times as you need to get the number of images per page you want.

  This is how works the latest version of iPhoto.  I don't remember how iPhoto 8.1.2 manages multiple copies of a picture on a page.

  

• LaserJet 1320: Print multiple copies

  Regardless of the number of copies I specify to print on my Laserjet 1320, it will only print one copy. I use Word 2010, Windows 8.1

  I suspect that the following is the case:

  • Your document is a MultiPage document (i.e. not just a single page).
  • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
  • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
  • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that the LJ1320 supports one of these.

  You can confirm that the foregoing occurs by:

  • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
  • Then examing initially file resulting .prn (you should be able to open it in Notepad).
  • Most of the file can be unintelligible, but initially will look like:

  

  If the command SET QTY is there, this confirms that the driver think the printer will make copies.

  If so, check the settings of the device to the printer:

  

  to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

  If the disk hard printer is set to installed, change to not installed.

  If the Mopier Mode is set to Enabled, change it to disabled.

  Then repeat the tests to see if it makes a difference.

  He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

• LaserJet 1160: Laserjet 1160 will not print multiple copies in Windows 10

  Before the 10th of Windows, I was able to print several copies without problem. Now with Windows 10 everything I print is 1 copy no matter what I do to different environments. Now the Mopier mode is grayed out as well as various other positions in the printer properties dialog box. Am I missing something simple?

  >> ... I have administrative credentials. I can see what I have to do in the printer properties, but cannot perform the appropriate function because nearly 90% of the functions are "grayed out"...

  I have no idea why this should be the case.

  Seems more like a permissions problem Windows, rather than a printer or a printer driver problem.

  ... and you confirm that the ' grayed' value for the Mopier Mode is currently set on " Enabled"?

  Check what your effective permissions ; you need 'manage this printer"access; This example shows my user (not administrator) does not have this access (so all 'device settings' values are gray when seen as logged-in while this user.