So I can pick it up at the factory using F11 with no disc setting?

So I can pick it up at the factory using F11 with no disc setting?

Hello

Recovery files are normally hidden in the Windows Explorer, so it wouldn't be a problem - the only way you can be sure that it works or not is to try it.

If you find that it does not work, you can order a set of replacement recovery disks using the link below and use them to reinstall the OS.

http://support.HP.com/us-en/document/c00810334

If you have a problem with this link, order them directly from HP.

If you live in the United States, contact HP here.

If you are in another part of the world, begin here.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Can pick us up on the web on smart TV?

    Can pick us up on the web on smart TV?

    This is my model of TV KDL55HX750, can you please see the specific me how searcg the web?

    Thank you very much.

  • Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

    Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

    Hello
    Welcome to the Microsoft answers site.
     
    By design, the game is not compatible with windows7.
     
    You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

    Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

    I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

    Here is the link:
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Let us know if you have any questions.

    Thank you and best regards,
    Azam - Microsoft technical support.

  • W511P - after upgrade to 8.1 Windows can display is no longer the bar using tasks finger gesture

    Since I upgraded my W511P ICONIA to 8.1 of Windows upgrade, I can view is no longer the taskbar using the finger gesture:

    • With Windows 8, I just brushed my finger to the edge of the screen where he was hiding the taskbar to view it.
    • Since the upgrade to Windows 8.1, brushing a finger across the screen displays a blue square selection area.
      Moving the finger to the edge of the screen where the taskbar is no longer reveals the taskbar.

    So when the option "Auto-hide the taskbar" is selected, it becomes impossible to access the taskbar without connecting a mouse or a touchpad :-(.

    Anyone else had this experience... or a solution to display the taskbar?

    Thank you for your comments.

    Based on these comments, I rebooted stable.

    "Now, I tried different settings in the control panel (touch function)" stylus and touch "and set a longer time for the long touch ("hold") fixed the problem.

  • Original (D) disk image hard is full, what can I do to reduce the amount used. Emptying trash, Defraged etc, any ideas please

    (D) original hard disk image is full, what can I do to reduce the amount used, I 1.36 MB of 7.43 GB free space. Emptying trash, Defraged etc, any ideas please?

    You're not supposed to be access the recovery partition or copying what anyone, unless you go actually to recover the PC as long as you plant. -ignore the msg.

    In the system properties > System Protection disable protection for the D drive

    BTW have you created your recovery disks, using the process described by the manufacturer of your PC, if you you do not need to do that now!

  • Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

    Group residential slow and other problems with it

    Hello!

    I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?
    And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.
    If I forgot something to write, or you need more information, do not hesitate to ask.
    I'd appreciate any help really.

    Hello

    Manually check manufacturers sites WiFi because pilots offered through
    Updates Windows will most often not be later (MS is far behind certifying)
    drivers and many manufacturers do not quickly submit newer versions or not at all). See
    Manual driver update of the methods below.

    The question could be WiFi in fact however try to device (hardware)
    update the driver first.

    What antivirus/security is used? Some of those who will cause problems with the
    Homegroup. Since it happens more often on a single computer that on there
    a check.

    From this link:

    Homegroup: frequently asked questions (also shows how delete and remove homegroup)
    http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

    "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

    Share files with anyone
    http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

    ==================

    How to upgrade manually the drivers:

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods
    below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
    found)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
    7 love the updated drivers.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How can I restore audio to the factory specifications?

    I use Skype with success and then decided to try to record something.  Now I can't be heard on Skype, and I don't remember what I did to change the settings.   How can I get the default back to the original settings?

    You probably have to go that far.

    First make sure that:

    in the Skype that your microphone is set as the default input device.

    * in Control Panel > sounds, make sure that the microphone is also chosen as a default entry camera to (record)

    * Double-click on the speaker icon in the systray and make sure that the microphone recording options, is the input device (check).

    If people still can't hear you, re-post giving number of make, name, and ref of PC/Laptop.

    See you soon,.

    Jerry

  • Can I go back to the factory setting after a new product windows, was intalled

    Windows 7 was installed on my computer (unbeknownst to me) by my friend to kid. I get this thing say activation has expired, and I need a product key. A friend don't know where is the Moose package, so I'm stuck either with the purchase of a product key that is over $ 100 or I wanted to know is any way to restore my system to window Vista? I don't have a CD as Vista is already installed when I purchased computer.

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • How can I create tabs of the panels using Dreamweaver CM³, similar to the Spry version available in CS6?

    I used Spry tabbed panels in a site. Need to recreate this page on another site using Dreamweaver CC. CC has no Spry component. Can someone suggest a 3rd party method produces or alternative to make similar panels on a page without having to hand code html-css-java?

    Here's a JQuery solution

    http://www.jqueryscript.NET/layout/responsive-jQuery-tabbed-panels-plugin-Tabber.html

    or you can copy your Spry of the other site files and change the contents

  • How can we list all of the APIs used in a specific module

    Hi all

    I need the list of all of the APIs used in the Module of pricing in advance.
    Is there a general method to do it for one of the modules?
    Can someone help me...


    Kind regards
    INDU

    INDU,

    For 11i, browse [repository integration Oracle | http://irep.oracle.com/] site, all the APIs are listed and grouped by module name.

    R12, repository integration Oracle is shipped as part of the E-Business Suite (as a responsibility).

    Kind regards
    Hussein

  • In previous versions of the CVI, use OpenFile with no path intended to look into the local path (i.e. the installation directory). Is there a way to do this in 2013 CVI?

    I use an .ini file to allow users to change the preferneces for starting the program. In the past, this file has lived in the installation directory and OpenFile could find the file cheerfully and apply preferences. In CVI 2013, the program seems to need an implicit path to the file. Is there a way to get around this?

    I use not yet CVI2013, but in any case, you can build up to a full path of a file in the folder of the application using the GetProjectDir and MakePathname commands when running.

  • Can Canon hfg30 I use projector with automatic adjustment setting

    I shoot a lot of stage shows (musicals, games, etc.). I was shooting with the GL2, but now have Canon Vixia HF G30. With the GL2, I used the "Spotlight" setting in a car so the faces of the performers would white out. How to get the Vixia HF G30 to do the same thing? Can I use its "Spotlight" to MP4 setting "Auto mode?

    RosieZak,

    I mentioned only touching Portrait in the menu setting because that's what it is set to default.  In this case, you will change to the setting of the spotlight.  In order to use the Spotlight, the camcorder must be set to manual mode.  You don't have to manually set the exposure settings if you do not want.  Even in manual mode, auto exposure can still be used.  If you set the camcorder to Auto, he chose most of the settings on its own, so the spotlight setting cannot be used specifically.  There is always a good chance that the camcorder will make the appropriate adjustments for the scene you are looking for, then you can certainly try shooting in automatic if it will work better for you.

  • How to reset the BIOS to the factory for a H8-1110 office setting?

    Hi, I would like to reset the BIOS to the factory setting on my Desktop-H8-1110 and could ' t find the reboot of the system BIOS by pressing the keys PF1, PF2, PF10, PF12, DEL or ESC, and would appreciate your help to advise me what I have to do to reset / restore BIOS to factory settings?

    At any time.

    I am pleased to have been of assistance.

    I read your post on the issue of the mouse, and I don't have a lot of experience troubleshooting hardware non-pilots.

    If I had to have this problem, and after trying the suggestions offered without results, I would be backing up my files and do a factory reset from the PC.

    Who would set operating system of software problems /, and I expect my usb mouse to work.

    If defective remedy the problem, I must say that there is a problem of motherboard of a certain type.

    Have you tried to install the update of the USB3 driver (if it's usb ports 3, giving you problems)?

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0006

  • How can I get sound on the Windows XP computer with an HDMI instead of DVi cable?

    How can I get the sound on the Windows XP computer using an HDMI instead of DVI cable - my monitor accepts cables but

    I don't know how to make it work with the HDMI - help interface? Thank you!

    The question is not what operating system you have (a version of XP), but if your video card has an HDMI output.

    See http://www.bhphotovideo.com/indepth/computers/tips-solutions/how-connect-pc-hdmi-tv

    If you need specific advice on your computer, follow these steps:

    • Open system information (start > run > msinfo32.exe > OK)
    • Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
    • Paste (CTRL + V) into your answer here
    • Return to system information and click on the + sign next to "Components" and then click "display".
    • Select all (CTRL + A) and then copy (CTRL + C)
    • Paste (CTRL + V) into your response at the end of the previous data
  • No sound when playing movies on my hard drive. However, I can listen to music on the internet and have sound playing discs in the portable disk drive. Any ideas?

    I have Window XP and plays movies with windows media player.

    Thanks in advance for your help.

    Hi Nwburbs2,

    Since you get sound while playing music from Internet Explorer and playing discs, you can check in Windows media player if the sound is muted.

    If you use the Windows media player 11, then you can see the change of Libraryfor following sound settings in Windows Media Player.

    Change volume settings in Windows Media Player

    Hope this information is useful.

Maybe you are looking for

  • 12.4.1 iTunes download gracenotes titles

    Windows 10 64 bit itunes 12.4.1 download tracks of Gracenotes, what is work in the round, please?

  • When it comes out for HD 2600 display based on catalyst 8.5 drivers

    Hello I tried the catalyst 8.5 drivers non-Toshiba but my GPU overheating!Then, when Toshiba released new drivers based on catalyst 8.5? At 8.5, there is finally a support for OpenGL... Therefore, it is very important to me.

  • How to completely remove Beats Audio from my system?

    My computer is a number of product p7-1534, H2N63AA #ABA, running 64-bit Windows 8.1.  The audio driver was an IDT, downloaded directly at HP, specifically planned for my system.  I'm trying to figure out how to completely remove the Beats Audio from

  • HP Pavilion DM4 QA702AV: Options updated HP DM4 QA702AV wireless card

    According to Intel my wireless card is here with my DM4, Intel Centrino Wireless - N 1030 is not compatible with Windows 10 that prevents me from the activation of the Wifi. I get orange light 0n F12 continuously. I would like to know what replacemen

  • Open just close vi front panal

    I have a sub vi that returns a true or false value. I uses a box to open and close the front paved the Sub vi.  If it is true, I use a FP invokepen to open the sub vi and if false I use a FP invoke: close to close the front panal. The sub structure v