So many programs running on my Toshiba laptop and I don't know what half of them are.

Similar Questions

• I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  I have a toshiba satellite T135D laptop and I don't know how to start my built in webcam which program should I use?

  Hello George,.

  I could not find this model number on the Toshiba site, so I suggest that you look at this page as a place to start your search: http://support.toshiba.com/drivers . They had a driver for a webcam, which is perhaps what you are missing. But in all cases, the Toshiba site is where you are most likely to solve the problem with the help of your webcam.

  Let me know if this helps you.

  Kind regards

  BearPup

• I have paid the monthly fee and have been using Acrobat Pro DC.  I had a problem where I broke my previous laptop and want to continue to use this product.  I bought a laptop and I don't know how to download the program without havin

  I have paid the monthly fee and have been using Acrobat Pro DC.  I had a problem where I broke my previous laptop and want to continue to use this product.  I bought another laptop, and I don't know how to download the program without having to pay again.  I pay $14,99 per month for this service, how can I download it without having to pay again?

  Hello

  Please download Acrobat Pro ms of the here. After you download the application, install and activate it by providing your Adobe ID

  Thank you

  Abhishek

• When I try to uninstall a program it says another program is already uninstalled but ITI is never ending and I don't know what program is that the uninstall is

  When I try to uninstall a program, what a popup say please wait program is already uninstall a program, but never stops and I can not know what program he talks

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• The scaner of safety program run for almost two hours and did not have detected what regardless of whether what is this microsoft scan?

  Operating system: Microsofti¿½ Windows Vista? Home (it shows that I have this Setup on my computer)

  My computer is corrupt the scaner microsoft run for almost two hours and did not find anyting.

  I have siscis Trojan, Skype worm PEKSE aver 1300 errors discovered by the other's signed starup program...

  Port 80 and 123 corrupt... I'm on hollow connection DSL my modem wireless (and connected to some infrastructure 5 GHz) and 2.4 Ghz wireless where I search I'm somehow hacked via the wireless I guess...

  Any program which tells you that you have 1300 errors is almost certainly a scam.

  Try to scan with Malwarebytes free

  http://www.Malwarebytes.org/products/malwarebytes_free

• How can I reset the permission to receive downloaded programs? This authorization has changed and I don't know why. I am the owner and the only user of this computer.

  After a long work, I learned that I'm unable to download programs such as Adobe Flash and Microsoft Security Scan.  In fact, they do not enter the folder C:\USERS\CLAUDE\DOWNLOADS\---mais they may not be recognized by the operating system (SYS 7) because for some reason any access is denied.  I looked at the book and find that Claude file is locked.  I don't know how it happened.  I tried to see how to unlock but again without success.  Can you help me?

  Thank you

  Hi Claude1112,

  Looks like you can't access the download folder. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. have logged as administrator?

  Method 1.

  Start the computer in safe mode and check if you can access the downloads folder.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  If the problem does not occur in safe mode, then proceed to clean boot state.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

   

  Method 3.

  I would like to create a new user account and check if the problem still persists.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

• I want to buy a new laptop, but I don't know what is necessary to enable photoshop and other art programs to run on the touch screen. It is likely?

  My budget is about $640

  System requirements | Photoshop

• When I try to connect to my router wirelessly from my laptop and the room, he asks for my network key and I don't know what it is.

  my brother used to all our computer equipment set up and he died last year. Well when I moved and tried to get into my new place it will not allow me without a network/wpa key. I know that I am trying to connect to my router and not my neighbors because when I unplug it it's the only name that disappears from the list of wireless networks. How can I know what is the network key or even set up a new? I am a bit technologically with faculties weakened to get detailed instructions on how to help me would be appreciated, but any help would be great.

  I'm sorry for your loss. Since we do not know how your brother to set up the router, it would be better to start again just to make sure that your wireless network is secure. Reset the default router. This is usually done with the wired router (on) by pressing a small button on the back or the bottom of the router, now the button for about 30 seconds and then let go. You can find the manual on the router mftr's Web site. your router if you need it.

  Once you have reset the router to default, set up correctly:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• On my laptop, I can't connect to the Internet. Windows could not help me solve problems and I don't know what to do, how do I get internet on my laptop.

  what the title says

  Hello

  1. what happens when you try to connect to the internet?

  2. do you receive any error messages?

  3. what type of internet connection do you use?

  4. it worked earlier?

  5. you will remember to make changes to your computer?

  I suggest you to follow the link given below and check if it helps.

  Method 1: Internet connection issues to solve problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2: How to fix network connectivity problems in Internet Explorer.

  http://support.Microsoft.com/kb/936211

  Method 3: Internet Explorer cannot display this webpage

  http://support.Microsoft.com/kb/956196

• I just bought 12 EP and get 1935 error when I try to install on my laptop. I don't know what that means or how to fix it. Any suggestions?

  How past tho Error 1935 to complete the installation?

  Try searching Google using "Error 1935".  It seems that it would be a problem with Windows with the software.

• on my computer, I can print from my photo, but it doesn't show me any image from another region, program prints, I check my printer and my printer in find, don't know what to do

  my printer will only print photo image and will not print from another program, did a teamwork tech on my computer and I don't know what has been subscribed, but whatever it is is cusing my computer don't not to print images, need help

  Hi clrfryeclijane,

  (1) who is the manufacturer of your printer?

  First, print a test page and check if it prints graphics as expected

  Print a test page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

  Method 1: Put the computer to an earlier point in time where everything worked well and test it. To do this, follow the steps mentioned in the link below

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Run the fixit available in the link below and check if that makes a difference

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  If the problem persists,

  Method 3: Download and install the latest version of the printer software (and drivers) on the device manufacturer's website.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What the * happened to my Windows Vista program earlier this week? I don't know what I did and I had nothing else but BIG TROUBLE SENSE HELP!

  After sevice pk 2 I did nothing but chase problems, 10 pilots down in a single night. Now it starts only in safe mode byitself and system restore it impossible of access that has not helped the only time where he worked finally unable to access updates windows either. At Mr fix it to work on things for houirs, but now his party and I cannot get safe mode and its so limited after problems, I spent this week all treat them w/problems. I don't know what else to do and I don't know what tpo events cause this Nightmare.Iam now crazy and lost, help me!

  Hi Claudette Russell,.

  ·         What is the full error message?

  ·         What happens when you try to start in safe mode or normal mode?

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Perform a startup repair.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: Restoration of system Windows Recovery (WinRE).

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3: Perform a check disk (Chkdsk).

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: When running Chkdsk on the drive if bad sectors are found on the disk hard when Chkdsk attempts to repair this area if all available on which data can be lost.

  Reference: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• Resolution of the problems of performance of MS said there are too many programs running at startup

  I ran MS performance problems resolution and it says I have too many programs running at startup.  Thank you for your help.

  * original title - can say it please, so I can understand, lol, exactly what programs are needed to startup.*

  Hi DjDenizeri,

  You can try to perform a clean boot and then turn on only the programs that you think you have need in the ultility system configuration:
  http://support.Microsoft.com/kb/929135
  I hope this helps.

• too many programs running at startup

  the computer has infomed me that there are too many programs running at startup. can you please tell me which are not important. Thank you

  That's what I said the last time you asked.
   
  Type msconfig in the search on the left. Go to the Startup tab and disable this you
  do not use. I disable all. You probably want to keep your Antivirus
  etc.
   
   
   
  --
  ..
  --
  "ezee44" wrote in message news: f33099f6-06a0-4662-a50a-0064bed6baee...
  > computer infomed me was that there are too many programs running at
  > start. can you please tell me which are not important. Thank you
   
   

• Toshiba laptops and overheating with Linux

  If you have a Toshiba laptop that seems to be overheating in Linux (like Ubuntu Linux), it is likely that this is due to bad "DSDT tables" (which refers to such things as energy saving) in the laptop.

  Each computer has a description of material data that are used by the operating system. In many cases, the DSDT tables have errors that does not allow for Linux make use of powersaving. In addition, some devices may not work because of the bad DSDT. You can check if your DSDT is OK or now by following the instructions at
  http://UbuntuForums.org/showthread.php?t=1036051

  You can perform this task even in Windows (extracted from the DSDT from your computer, recompile it and seewhether there are a of errors.) With help, you can easily fix most of the errors and 'install' back the fixed DSDT).

  You can google for "toshiba dsdt" and 'toshiba dsdt overheating' case, for example.
  To learn more about DSDT,
  http://PowerSave.sourceforge.NET/PowerSave/DSDT.html
  http://ACPI.sourceforge.NET/DSDT/index.php

  Hi tarafog

  Thanks for this useful article. I m watching carefully what you write here, and I'm happy here is someone with a very good knowledge of Linux.
  With your help, I think a lot of people's decision made test Linux on Toshiba laptops and try to deal with the new operating system.

  Thank you for your participation on the Linux section.