So, updated for Win 7. Clean install. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

Clean install. 2 problems. 1. no installed audio device? 2 Ethernet adapter not found. Yes router does not. Planet WNRT - 617G

Probably you run first win7 Upgrade Advisor, who did you would probably show your system as not supported under win7

Tags: Windows

Similar Questions

  • Try to install the update for win 7 error code windows service install could not be accessed

    I can't indtall a program

    Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

    Try to make sure that the Windows Installer service is running, or force start it.

    1 open run and type services.msc, and then press ENTER. You can also go
    to the Panel of control-> Administrator Tools-> Services.

    2. in the installation list services, locate Windows Installer.

    3. check that the status is started. If the condition column is empty,
    Right-click Windows Installer, and then select start.

    4. If you get the error trying to force starts the Windows Installer service,
    try to change the Startup Type to automatic (default is Manual), then
    Restart the computer.

    You can also give the following a try, make sure that you back up your Windows registry database before you try:

    7 How do I backup the registry in Windows

    http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

  • Satellite L300 - where can I order CDs of update for Win 7

    Hi all

    I find my Vista starts so long time, about five minutes, and now I want to upgrade to win 7,.
    Where can I order the CD Update for win 7 from the Toshiba site. Thank you

    Hello

    You cannot order this disk from Toshiba.
    You can order just a recovery disk. But if you laptop came with Vista, then the recovery disk contains the Vista OS and not Win 7.

    If you want to use Win 7, you can buy this OS and then you could install it on the laptop. Win 7 drivers should be available on the European driver page

  • Unable to get updates of Windows after cleaning installed.

    Inspiron 1720, Win7 Ultimate x 64

    A clean installed today on a separate partition. Did not remove the existing installation of the same operating system by using the same key. The new facility will not download updates. C:\ shows many files from Windows.old. No matter what jump to anyone or is this Win10 Win10?

    PS This switch to Win7 Professional would help the situation?

    I should add that it is a slipstreamed SP1 version. I was able to get IE 11 installed without problem.

    Theres been a few problems with Windows Update with Windows 7 clean install for these last months... You can use the WSUS Offline Update Patch Windows 7, after that Windows Update works.

    http://dellwindowsreinstallationguide.com/WSUS-offline-update/

    However since your goal is to make your system a Pro 10 Windows device. You better just download an .iso Windows 10 TH2 and pure install directly with your Windows 7 Ultimate product key:

    http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

    https://www.YouTube.com/playlist?list=PL1RkaknDn7v-Ucth4gt0U3BHVSY7oNkWr

  • I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

    I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

    Hello

    1. do you get any error code or error message?

    2. what day you installed recently?

    It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

    Follow the steps to uninstall and re-install the drivers.

    a. click on start toreduce this includes this im and then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

    Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

    Hope the information is useful.

  • My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

    As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

    I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

    Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

    Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

    What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

    For the firewall problem, you can try the following Microsoft Fixit.

    Diagnose and automatically fix problems of Windows Firewall service

    http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

    One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

    Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

    Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

    See the next WD re: Windows Defender and Microsoft Security Essentials

    Good luck...

  • How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

    How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?

    Updates are not related to series numbers, so you must have done something compared to try to use an upgrade rather than an update.  Adobe not revise older versions of their software to adapt to the latest hardware/devices.  They create/sell new versions of their software for it.  If you subscribe to the Cloud at some point you shouldn't have a problem with the software becomes obsolete.

  • Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer

    Original title: speaker FOR desktop

    In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack.    The device is installed REALTek.   When I play songs or video, he said: -.

    "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

    How to solve this problem.

    Hello

    I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.

    I would like to know some information:

    1. Have you tried to plug any other speakers or headphones?

    2. You did changes to the hardware/software before this problem?

    3. Have you tried using these speakers with another PC?

    Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-cannot-play-the-file-because/7faf6bdb-6a4e-4B5B-b5a9-2119907d953e

    Hope this information helps.

    Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

    Please get back to us with an update on the issue, we will be happy to help you.

  • Joined to a domain and an administrator remote after the installation of SP1, updated to 10 settings (clean install) then

    Wipe the hard disk, reformatted and did a clean install of OS7 home (fossoyées pro hoping group domain policies and etc. would not be a problem).  But they are still there. Reinstalled again.  I can't remove the files manually, give me permission. Loading guard who looks like a fake update file, but I can't delete that either.  I'm at my wits end.  I also have a problem with one of my Outlook email accounts, displaying a string of what looks like a key under my user name.  I have dealt with this for 2 months.  had my machine to two different local mechanics and nothing.  Even exchanged the motherboard and the drive.  How's it relate?  I do not even use the same key.  The only way he could do it is through my network connection. (Disabled Wifi too).

    I read something on the Panther Trojan and I do not have a file of Panther on my machine (which again, I can't delete).  I didn't even think that HOME version had this kind of remote administration and yet it moves it. Its load of 32-bit strange file and run it on a 64 bit system.  I don't know what to do from here.  I can't get a version of Windows installed which does not suck up all my processing power and crazy amounts of data transfer.  I pulled out an old HP Pav and am now loading XP on it.  At least I will be able to view and edit files it contains.  I don't think safe, even check my email on this machine. (I use my ipad for that).

    Here are the results of the queries from the command line, screenshots and event log shears.   Since I was the last reinstall at about 21:00 there are 294 Logon and created special logons.  Not to mention that I had an another windows machine and one android corrupt their hooking up to my Dungeon phone.  The worst is a 10 years ' worth of my design files holding external drive.  Sighhhhhhh...

    IM so sick of looking at this.  Im going to bed and hopefully not dreaming about it.  If someone can tell me how to stop this happening, I would SO appreciate it.  Support for Windows is a joke.

    I have run 3 different programs of Virus Scan on it, reformat the drive twice (wiped to zero once), and used three different install media (three different versions of Windows. 0 s 7 home, pro and pro OS7 OS10 (7 pro is what I was running when this began).)  Again, it is after that I paid two services of different repair to diagnose, pull the wireless network card, replace the motherboard and replace the disk.  After that I freaked out on them they began to throw the installation discs and Home keys. lol seriously, I might as well throw my money down a hole. (the key I've finally pulled the machine isn't that I've never owned?) I guess that's why I'm trying so hard to get pure installed, I already so much money in it.  I should probably just give up and load Linux.

    If I ever get my hands on this bloody trusted installer it is a dead man. Thanks in advance!

    Microsoft (R) Windows (R) operating system group policy result tool v2.0
    Copyright (C) Microsoft Corp., 1981-2001

    Created on 20/07/2016 at 23:03:12

    The RSOP data for OWNER-PC\Administrator on your PC-OWNER: Logging Mode
    ----------------------------------------------------------------

    OS configuration: Standalone Workstation
    OS version: 6.1.7601
    Site name: n/a
    Roaming profile: n/a
    Local profile: C:\Users\Administrator
    Connected over a slow link? : no

    COMPUTER SETTINGS
    ------------------

    The last time group policy was applied: 20/07/2016 to 22:31:33
    Group Policy was applied from: N/A
    Group Policy slow link threshold: 500 Kbps
    Domain name: 37L4247E29-32
    Domain type: Windows NT 4

    Applied Group Policy objects
    -----------------------------
    N/A

    The following Group Policy objects were not applied because they were filtered
    -------------------------------------------------------------------
    Local group policy
    Filtering: Not applied (empty)

    The computer belongs to the following security groups
    -------------------------------------------------------
    Required at the system level
    Everyone
    Builtin\Users
    NT AUTHORITY\SERVICE
    LOGIN CONSOLE
    NT AUTHORITY\Authenticated users
    This organization
    BDESVC
    BITS
    CertPropSvc
    EapHost
    hkmsvc
    IKEEXT
    iphlpsvc
    LanmanServer
    MMCSS
    MSiSCSI
    RasAuto
    RasMan
    RemoteAccess
    Annex
    SCPolicySvc
    SENSE
    SessionEnv
    SharedAccess
    ShellHWDetection
    wercplsupport
    Winmgmt
    wuauserv
    LOCAL
    BUILTIN\Administrators

    USER SETTINGS
    --------------

    The last time group policy was applied: 20/07/2016 to 22:36:33
    Group Policy was applied from: N/A
    Group Policy slow link threshold: 500 Kbps
    Domain name: OWNER-PC
    Domain type:

    Applied Group Policy objects
    -----------------------------
    N/A

    The following Group Policy objects were not applied because they were filtered
    -------------------------------------------------------------------
    Local group policy
    Filtering: Not applied (empty)

    The user is part of the following security groups
    ---------------------------------------------------
    None
    Everyone
    BUILTIN\Administrators
    Builtin\Users
    NT NT\INTERACTIF
    LOGIN CONSOLE
    NT AUTHORITY\Authenticated users
    This organization
    LOCAL
    NTLM authentication
    High mandatory level

    After you activate the hidden administrator account (which already had a defined password btw)

    C:\users\administrator>set
    ALLUSERSPROFILE = C:\programdata
    APPDATA = C:\Users\Administrator\AppData\Roaming
    CommonProgramFiles = c: files
    CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files
    CommonProgramW6432 = c: files
    COMPUTERNAME = OWNER-PC
    ComSpec=C:\Windows\system32\cmd.exe
    FP_NO_HOST_CHECK = NO
    HOMEDRIVE = C:
    HOMEPATH = \Users\Administrator
    LOCALAPPDATA = C:\Users\Administrator\AppData\Local
    LOGONSERVER = \\WIN-01J5F1J7NAH
    NUMBER_OF_PROCESSORS = 4
    OS = Windows_NT
    Path = c: Windows system32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32
    \WindowsPowerShell\v1.0\
    PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
    PROCESSOR_ARCHITECTURE = AMD64
    PROCESSOR_IDENTIFIER = Intel64 family 6 model 23 Stepping 10, GenuineIntel
    PROCESSOR_LEVEL = 6
    PROCESSOR_REVISION = 170 a
    ProgramData = ProgramData
    ProgramFiles = c: Program Files
    ProgramFiles (x 86) = c: Program Files (x 86)
    ProgramW6432 = C:\Program Files
    PROMPT = $P$ G
    PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
    PUBLIC = C:\Users\Public
    SESSION = Console
    SystemDrive = C:
    SystemRoot = C:\Windows
    TEMP = C:\Users\ADMINI~1\AppData\Local\Temp
    TMP = C:\Users\ADMINI~1\AppData\Local\Temp
    USERDOMAIN = OWNER-PC
    USERNAME = administrator
    USERPROFILE = C:\Users\Administrator
    windir = C:\Windows
    windows_tracing_flags = 3
    windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Pavilion 15 t product # G1V32A: HP 3D DriveGaurd Error Message since the last update for Win 7

    Since the last update of Win 7 in the last week, I get an error on AccelerometerSt.exe is unable to start up.  I guess that's the HP 3D DriveGuard show.  How can I get the program re - install?  Thank you!

    Hello:

    Normally, just reinstall the driver 3D driveguard gets it working again.

    This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

    File name: sp71811.exe

  • Reformat Windows 7 hard drive for the next clean install Windows ISO 10

    This is in anticipation of the next clean install of Windows 10 ISO.

    It is understood that I need to move from Win 7 to win 10 first, before clean install. (Select MS verify the legitimacy)

    It is understood that I need to reformat the hard drive before a clean install.

    It is also understood that the "recovery disk" can reformat the hard disk.

    ===================================================

    One of my computers in Win 7 I would successfully created the "recovery discs. (Wonderful)

    --------------------

    Problem:  My other Windows 7 (Vista upgrade) will not let me create the "recovery discs.

    When you do: start / run / recovery

    It allow me to create "backup and restore disks. (This is not the recovery disks that I need).

    ===========================

    Question: How do I reformat my another computer on Windows 7 (Vista upgrade)?

    Note: Two computers are different: the first is a HP, the other is a gateway.

    ("Partitions" of hard drives may be different.)

    I don't know: if I can use the recovery made the first computer disc to reformat my second hard drive?  If this isn't the case, I'll be in trouble, because I don't know how to reformat my second computer.

    You need to use the means to reinstall that you can upgrade Windows Vista Setup to format the drive.

    The other system recovery media is likely to not work, but you can always try, but have appropriate reinstall media just in case.

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

  • Update for Win 7

    I have a Dell laptop with Win Vista and I clean installed Win 7 Pro. I also have a desktop Dell with Win XP computer. Is it possible to use my Win Vista COA from my laptop to upgrade to Vista on my desktop?

    That's right, the nature of the legal agreement.  It's a "OEM" copy, or the original manufacturer.  It is always unique and directly related only to this specific computer.  It may not be transferred or used on another computer.

    If you bought Windows in a store directly, instead of coming up with the computer, then you can transfer and use it however you wish.  But since it is an OEM copy, he is stuck with this PC for ever.

  • Impossible to update applications Win 8 or install of new applications, error 8007064a

    Install Windows 8 Pro about 28 August. Win 7 update, keeping the programs and files. When I opened the store, I can browse apps and try to install, but the installation fails with the error 8007064a. The same happens when I try to update the applications for which an update is available. All the applications installed initially int work to update properly, I can't update or add new ones. This problem seems to have been present since the update to win 8. I don't see any other problems with the PC or operating system.

    Use Deployment Image Servicing and Management to fix Windows Update errors in Windows 8.

    1. Open an elevated command prompt. To do this, click Start, click principally made the programs, on Accessories , right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    1. Type the following commands. Press ENTER after each command.
    2. DISM.exe / Online/Cleanup-image /Scanhealth
    • DISM.exe / Online/Cleanup-image /Restorehealth
    1. Close the command prompt, and then run Windows Update again.
  • Hey windows updater for win 7 is not failing to work on each test

    Hey guys got a prob I can manage not usually on my own, but not this one I guess. always have win 7 is not a fan of 10 and my habit to update windows update for new updates or even find a new update anyone got some ideas I'll throw one error codes dry

    Please run the Windows Update Troubleshooter:
    http://go.Microsoft.com/?linkid=9830262

    Please provide details of any problem it reports as not fixed.

  • Update for Win 7 (KB303553)

    I get the message of this update kb3035583 to do, but I also shows the review of my history of update, KB3035583 has been successfully installed.  Thanks for any help and happy new year to all

    KB3035583 is part of the 'Get Windows 10' application that Microsoft keeps pushing on Windows 7 and 8.1 systems.

    Microsoft seems to periodically repeat this update - just in case anyone has uninstalled but I forgot to 'hide '.

    If you do not update Windows 10 (at least in the near future), you might be interested in installing the GWX Control Panel that will disable attempts by Microsoft to help you install Windows 10 (can be reversed whenever you want)--> http://ultimateoutsider.com/downloads/

Maybe you are looking for

  • How can you get the dirt on the keys of the keyboard wireless?

    The keys on my keyboard are dirty, and I know that before you wipe with the cloth won't cut it.  Any ideas on how to clean them without killing my keyboard? Thank you Dolores

  • Google.co.UK page is too big for monitor

    Somewhere along the line, I can't remember when, to search google.co.uk has become too broad to fit my monitor, although the google.com page is fine. also, if I open google.co.uk in IE (shudder!) it's not problem, which shows that the problem is with

  • Satellite L40 - 139 - I want to upgrade the RAM

    HelloMy laptop is Toshiba Satellite L40 - 139 PSL40E model, operating system Windows XP SP3, 1 024 DDR2 RAM (667 MHz) (512 + 512). I want to increase the RAM memory using 2048 DDR2 RAM (1024 + 1024). Laptop manual can not find if support * _dual-chan

  • Windows 2012 R2 disk mirroring

    Error - all disks holding the extensions for a given volume must have the same size of sector and the sector size must be valid I'm trying to reflect a disk mounted of a Nexsan E60 on a disk mounted on a Dell Compellent SAN. I get the above error. I

  • Xbox 360 wired controller not recognized not no more usb

    My wired Xbox 360 controller used to operate very fine and dandy when I used to connect it to the usb port. It would recognize that the controller was plugged. All of a sudden he stopped to recognize my controller even when I plug in the usb port, th