SOAP/AXL to pull numbers

Similar Questions

• I can create a document that uses cells from another document

  I want to have a single numbers document that pulls the numbers by a lot of other documents.

  Each pay period, I have a different document with hours of work on the different "stuff".  This document has formulas in the cells that add columns, create totals, show the amounts of money, etc...  Now, I want 1 document where I can create a cell with a formula (?) that allows you to view the totals for all other documents.  Is this possible?

  Thank you!

  You can pull numbers from other tables, even tables that are not in the same spreadsheet (tab).  But without a script a bit bulky will not pump you the values of a separate document numbers.

  In number because it is easy to have multiple tables on a single sheet, and there may be multiple sheets in a document, I recommend you organize your time-past data is self-contained in a single document.

  In addition, it is much easier to build a summary information in a table, it is to consolidate data from different tables. Then you might consider making your time spent in a table entries.  Then you can extract summaries of project, etc. a table.

  Recommend to have a look at the model of "Personal Budget" file > new to see how it would work. You would add "hours" instead of "dollars", but the principle would be the same.

  SG

• Unity API / AXL / SOAP

  Hello

  Is it possible for subscribers of managed the unit via an external API based on AXL/SOAP?

  Currently, there is no SOAP connection based in the unit, but you can use procedures stored SQL and views to do what you do (that's what all my tools). I have a few samples of code and documentation showing how to make configuration tasks base using this interface on www.CiscoUnityTools.com that you can check for more details. The documents page has a paper "for unit administration" and the Code examples page has several examples of creation/update subscribers and other common tasks.

  There will be a SOAP interface in the unit, but it will be just a portal to call these same views and stored procedures, it will not be an owner interface / specialized - any time you spend familiarizing yourself with what's there now will be applicable on the road.

• Classic BlackBerry 'dial' SMS pull... different phone numbers when only a mobile number will work

  When you compose a text Message, it takes all the numbers to contact for the person.  not well thought out.  only a mobile number capable of receiving sms.  model "BOLD" or 9900 did this.  need to get fixed as soon as possible - it wastes time choose good number when only 1 option is correct in the first place.   slow

  OK great.  y at - it option to create a default num for sms?  don't see that.

• reminder of column of numbers

  Hello

  I use v3.6.1 numbers.

  We have a database of all the equipment that we have lines indicating the brand, model number, serial number, description price per day and so on.

  What I want to be able to do is to create an invoice on a separate sheet and enter the model number in the appropriate column on the invoice, then carry the numbers automatically complete the rest of the information.

  Is this possible?

  I hope that makes sense.

  This may work for you:

  

  The table below is your database of equipment for rent AND is called "Equipment"

  The table on the right is an example of invoice that pulls its information from the database.

  For the table on the right...

  A2 = if (counta(B2:C2) > 1, LINE (−1), ' ')

  It's shorthand dethrone select cell A2, and then type (or copy and paste it here) the formula:

  = IF (counta(B2:C2) > 1, LINE (−1), ' ')

  columns B and C are when you enter the information (in this example the columns are white shaded where you enter information)

  D2 = if (A2≠"", OFFSET (Equipment::A$ 1, MATCH (C2, Equipment::B, correspondent-method) −1, 0, rows, columns), ' ')

  E2 = if (A2≠"", VLOOKUP ($D2, equipment: $A:$ F, GAME (E$ 1, equipment: $1: $1, method of correspondence), 0), "")

  Select cell E2, copy

  Select cells E2 through H2, dough

  I2 = IF (A2≠"", H2 × B2, "")

  Select cells A2 to I2, copy

  Select cells A2 at the end of the column I, dough

  You can add a footer for the total bill amount and calculate the tax and other things.  If you need assistance with this.

• SIRI refused to call 3 phone numbers of the figures suddenly

  Hello

  I talked with Alexis in the Apple Support centres to TX and she confirmed after checking that it is a known issue and that she is wanted in. HOWEVER, it also sounded like this problem was not given serious attention it should have because she actually said that she could not say WHEN or even IF this problem would be solved!

  ******************************

  I live in the region of the San Francisco Bay area (California) and I discovered today that SIRI consist is more 3 digit phone numbers. I suspect the recent 9.3.1 IOS upgrade at the end of March has broken it.

  Here's the background: in CA, there is a service 511 people can call to get the traffic information on accidents and traffic problems in their neighbourhood. It is WIDELY used in the SF bay area CA by the drivers that are on the highways, etc. I used the service 511 SEVERAL times and he has always worked, but I him have not used in the last month or so because that I did have major traffic issues to deal with several weeks. Today, there are traffic problems and much to my dismay SIRI would compose is 511.

  I awakened SIRI and said Dial 511. SIRI responded initially with the appellant , but then 2-3 seconds more late SIRI came back and said that I can't call 511. Tried several times, same problem. After I got home (not driving now) I've done a few tests more and find SIRI refuses to dial ANY 3 numbers. I tested 411, 511 and 611 (the latter is the support for my operator AT & T number). Have the same problem with all 3. Call these numbers by manually entering the number works as expected.

  Again, I have used this feature strongly with 511 for a very long time - last time was probably sometime in March and it worked, but as I said I found it was 100 percent broken today.

  Yet once, Alexis of Apple support confirmed this problem has been reported on several occasions and is a known problem but she left me a very bad feeling that Apple cannot take this problem very seriously.

  I need to remember that this is a MAJOR issue. 511 traffic information is a HEAVILY used service in CA and the LAST thing you want someone to do is to pull out their phone and dial this hand because SIRI refuses to make the call!

  Please ensure that this problem is given a HIGH priority, as it is a major security problem because of the 511 service. After all you don't want people tempted to pull out their phone to dial 511 manually when they are driving, as this could cause an accident!

  Note that I have no idea if 911 works even as it's not something you can really try to test calls with since I do not have a real emergency situation. If 911 is broken in the same way, this problem would become even more serious.

  Thank you

  Allen McWongahey

  It is a user support forum. Nobody here can do anything about yourself. You can, however, provide your feedback directly to Apple via this link:

  http://www.Apple.com/feedback/

• Pull on the values of data in table 1 d

  Hi, I have had trouble finding information on the Discussion forums on this topic.

  I have a table 1 d (1 x 1024 values) and would pull some values there. For example, I could like shoot 435 by 567 values, then do some math operations on those values. There will be two digital controls on the front panel to set these two numbers. How would I go to do this?

  Thank you!

  In addition, in LabVIEW array indexes start at zero, so 2 to 5 in your example is index 1 to 4. The code below will do.

  

  If you need to treat multiple sets of data (which is what I interpret as a reason to put the result in a table), place the above code in a loop.

  Lynn

• Web Service SOAP returned XML data are unreadable

  Hello

  I hope someone with some experience of SOAP could help me find a solution for which XML data coming out of a Web Service (SAP production) are illegible.

  In the attached file is the Web Service response, and as you can see in the header of the request is OK. (request to pass a serialized PCB of a 'tail' to 'work'). Request is successful (I manually check by directly connecting the SAP web service and check), but also the data on the printed circuit should be returned (edge stock code, etc...).

  My request and response with the XML data returned works very well in SoapUI.

  Any help would be appreciated.

  Darin.K wrote:

  I agree with Phillip (except that you want to "inflate" the payload).  You can simply post a VI with full response defined as default in a string control/indicator and I am betting we could get it sorted.

  Thanks Darin, I think acompress and after reading an article google re: SAP NetWeaver, who used the terms inflate and deflate, I confused my prefixes. I also regularly exchange numbers when transcribing the long numbers. Dyslexic, I am.

  JonnyR - please use the uncompress function I've included on the same link as soon as possible. You will need to remove the header HTML of the string portion. If you do not, unzip it will interpret the header as compressed data and you will get jumbled as output data.

• Analysis table of numbers and draw a graph

  Hello

  I'm quite new in the use of labview and am now facing my first isue. I have a text file of measured raw data. The tile of text looks like this:

  "Text type"; "" Flexure.
  "Final linear mass." 100.000000; "" Tex ".
  "Custom text entry 1";" »
  "Dry time"; "" Mm extension; "" Load N';' " Flexure stress MPa; ' Cycle Count '; "Total Cycle Count '; "Number of repetitions; ' Marked Data '; "PIP count";
  0; 0; 0,3586976; -0,7188803; 0; 0; 0; 0; 0; 0; 0; -0,3586976; 0; 0
  0.01; 0; 0,3380042; -0,6774079; 0; 0; 0; 0; 0; 0; 0; -0,3380042; 0; 0
  0,03;-5,66667e-005;0,3339654;-0,6693135;0;0;0;0;0;5,66667e-005;0,0002499001;-0,3339654;0;-5,66667e-005

  What I need is to pull the numbers of the first and the second column (each column separated by ';') in a table and then transpose what I can trace in a chart.

  Could someone help me or point me to the source of the study on the right?

  I tried to use the Scan of the file and reading of the worksheet screws but either did not work.

  The description specified in help is not clear enough for me.

  I thank very you much for helping me to make the first major steps with LabView.

  Martin

  Hi Martin,

  You can use the function "read a spreadsheet file. Use "Subset of the table" on the result to get what you need and it intrigues in your chart.

  Mike

• Calculator display corrupted numbers blackBerry Smartphones.

  The numbers are like cut in half (like from the waist down). It should display the number of right? What can be the problem? Thank you.

  Try a battery pull and then again launch the calculator application.

• Contacts of numbering with number as the name blackBerry Smartphones

  OK, first post and here's what I got.

  I have contacts to many places retail with a number of store.

  example: (in coordinates) name: 1234, last name: Mountainview store.

  so I go and click on the Send button to pull up the phone and dial "1234" and it is says "no contacts" and waiting for me finish typing in this 'new' number and hit send.

  but, if I have everything start from the home screen and press the Send button to pull up the phone and then press the menu button, then click on "call for contacts" then I can compose "1234" and he pulls up the contact for the Mountianview store, so I press the button send and he composed this contact.

  so I need to know if there is a better way to enter the store info in contacts or whatever it is I do, I can type the store number into the phone to have it go back the contact without going to ' menu > call each time from the contacts that I give the floor. I don't want to use the name of the city (call me lazy, it's ok.)

  The problem is that the device assumes that if you enter the numbers in the phone app you want to dial a number to hone.

  I think that the only work around for just go first the address book and then search for the store number and dial from there

  If you Dial on disabled home screen, you can simply type the a button to go to the address book then down using your store number since there with.  You are still using the contacts function call but skip the first step of phone application.

• S10-3 serial numbers

  I use a report to pull all the serial numbers of all our computers. However, the only computers where serial numbers are not displayed are the s10-3. Where is the serial number stored on those computers?

  Edit by mod: correct the name of the post: S-103 S10 - 3

  serial numbers are stored in the bios (motherboard), you can check the bios for it, or you can download 3rd party applications such as everest or cpu - z to find out the serial numbers.

  Edit: http://img101.imageshack.us/img101/8039/everesto.png

• Pass Null to the wrong phone numbers

  Hi, I'm going to pull the phone number of source database, I have the following anomalies: 0000000 1111111111 1111111111111 1231111111 661111111111 if we can't clean up the data in the source database, how can I pass null to target for phone numbers? Thanks, Kiran

  Hello

  Use a CASE statement.

  If there is some specific values you want to deal with the NULL value, then you can do something like:

  SELECT...

  CASE

  WHEN phone_num IN ('0000000'

  '1111111111'

  '1111111111111'

  '1231111111'

  '661111111111'

  )

  THEN NULL

  Of ANOTHER phone_num

  END AS phone_num

  ...

  If there are templates you want to check (for example, all 0, no matter how long), you can use LIKE, REGEXP_LIKE, LTRIM or other functions in the WHEN clauses.

  I hope that answers your question.

  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Bullets and numbers disappeared completely - head melted!

  Hi all you nice people, a little help are necessary before my brain melts and affects my ear.

  I use InDesign CS6 at work and my bullets and numbers disappeared completely. Without warning, I just pulled over InDesign one morning and went to add a few balls to a doc and they were not where they used to be:

  
  

  Just gone. Missing from the paragraph toolbar and stayed in the Type tab. I have reset my work space several times and they have not returned.

  
  

  I checked and I did disable the bullet and numbering in the control panel option to customize because I can't, because this option does not yet exist. Bullets and numbering option disappeared.

  

  I work next to two designers who use InDesign on a daily basis, two of them are confused as to what could have happened. Above all, they laugh at my misfortune.

  I reinstalled InDesign and it did not work.

  
  

  I'm currently creating documents and then having to use another computer to add to the points. Which is a bit frustrating.

  Any ideas? Help me please!

  First, open the extensions Manager and make sure they are powered (sometimes things goes off without reason) and see replace your preferences

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps