Software conflict

Similar Questions

• Recommended Firefox that I update to Adobe Reader DC of Adobe Reader XI, which was installed on my computer when I bought it.  But Adobe Reader DC was originally software conflicts, so I uninstalled and downloaded Adobe Reader XI.  However, I can not inst

  Recommended Firefox that I update to Adobe Reader DC of Adobe Reader XI, which was installed on my computer when I bought it.  But Adobe Reader DC was originally software conflicts, so I uninstalled and downloaded Adobe Reader XI.  However, I can not install Adobe Reader XI because it keeps asking me for the serial number.  Please don't tell me that Adobe Reader XI does not require a number series (as someone said on the Forum), because I continue to have asked for a serial number.

  Thank you for the screenshot.  The title line of the installation panel shows clearly that you want to install Acrobat Standard XI, not the Software Adobe Reader.

  Download the installer for Adobe Reader http://get.adobe.com/reader/enterprise/

• Toshiba software conflicts with Microsoft and prevent the wireless connection

  The Toshiba Software on this laptop I have is causing a conflict with Microsoft software and I can't connect wirelessly to an ad - hoc network. Wireless Auto configuration does not automatically start as Toshiba Software is causing a conflict, above, this rolling. If you have also encountered this problem please can you me what you can do to permanently solve this problem? For the moment, I have to go through a process of manually start the Wireless Zero Configuration services and fiddling around with disable and then re-enable wireless network connections if I'm lucky then it finally works, and I have internet! If you are unsure how to permanently solve this problem you know what the telephone support number is for Toshiba UK?

  Thank you very much

  John

  Hello John

  What model of laptop and operating system are you using?
  Do you use the preinstalled original Toshiba OS?

  If you want to talk with Toshiba Toshiba s call hotline in the United Kingdom. The number is on the Toshiba UK support page.

• Nikon NX2 with Win 7 Home Premium software conflict

  I installed Nikon NX2 software on my laptop HP G71-340US, Win 7 Home Premium edition, 64-bit and the program opens, the camera sees the laptop (I can even "go down" to the DMTC map and see the photo on the camera chip but will not automatically fill the transfer software to go from camera to the laptop (I can do it manually).)

  I checked the compatibility of the program (defined on W7). uninstalled, even restore to an earlier point (cannot go back to an earlier date than the original installation).

  I know that this is a conflict with this laptop that I installed the same software on another computer and it works fine.

  Just puzzled as to look elsewhere, short total reinstall I would avoid as much as possible.

  Hoping that someone out there has an idea or a solution.

  Sincerely,

  Bruce

  I installed Nikon NX2 software on my laptop HP G71-340US, Win 7 Home Premium edition, 64-bit and the program opens, the camera sees the laptop (I can even "go down" to the DMTC map and see the photo on the camera chip but will not automatically fill the transfer software to go from camera to the laptop (I can do it manually).)

  I checked the compatibility of the program (defined on W7). uninstalled, even restore to an earlier point (cannot go back to an earlier date than the original installation).

  I know that this is a conflict with this laptop that I installed the same software on another computer and it works fine.

  Just puzzled as to look elsewhere, short total reinstall I would avoid as much as possible.

  Hoping that someone out there has an idea or a solution.

  Sincerely,

  Bruce

  I changed the setting of compatibility for XP SP3 and it works now.

• Software conflict or improper installation?

  Yesterday, I installed an update of Silverlight. Today, when I tried to use Netflix, the backgroundphoto that I use on my desktop (I have a Mac OS x 10.6.8 with iPhoto) disappeared. Whenever I try to upload a photo, it appears, and then suddenly disappears. Could there be some kind of conflict with the update of Silverlight? I tnink I do not close my browser window during the installation. In any case I would like to uninstall the update and then re - install, this time with closed browser. How do I do that? Thank you.

  Hello

  You can visit the article to uninstall and reinstall Silverlight from Mac.

  Download Microsoft Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  You can also contact Apple for assistance on this issue.

  http://www.Apple.com/Mac/

• wireless software conflict or problem of driver... not sure.

  Just wiped my hard drive and reinstalled XP software system. I downloaded all the patches and windows stuff. When I try to connect with my wireless my computer detects the presence of my network, but when I click on 'connect' (in the prompt "choose a wireless network") it connects for 10 seconds and then immediately disconnects. I'm sure that I have downloaded all the drivers legs and patches, too.

  "Reinstalled XP software system" can mean different things to different people.

  If you have just reinstalled XP, instead of using the technique of "recovery" of the computer manufacturer to return the computer as it was when it left the factory, you need to install the drivers for any hardware of the computer.  Windows XP has some drivers built - which is why the system can start with a clean installation of XP, but to get full use of your hardware, you must install the system-specific drivers.

  Don't get drivers from Windows Update.  If you have a computer of 'brand', you can probably get the drivers for your particular computer all at once to the web site of the manufacturer of the computer.  Otherwise, you will need to identify the make and model of the different bits of hardware and get the drivers of their respective manufacturers.

  In general, you will need the drivers for:
  motherboard
  network card
  Video adapter
  audio adapter
  and, of course, devices such as printers and scanners.

• Hardware or software conflict?

  Problems with USB adapter for sagem wi - fi, network freeze all the time and therefore VERY unstable Internet, BSOD problems connection (a LOT). This, the software being updated through windows update, cleaned of unnecessary software, reconfigured start up with the command "msconfig", the updated drivers via Device Manager but that did not help because after the digitization of 14 obsolete found drivers drivers need more updated (online driver update software too expensive!) What to do next? I was at my computer for 3 days in a row! The network actually works because with my iPad, I have zero problems, it looks like a hardware or software incompatibility with my pc (OS Vista professional) problem. Maybe I need a new PC? Help!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

  Please also go to start > run > msinfo32 and record the results.  Send it with the DMP files, thank you.

• The NB100 - error message - on «WWAN» software activation

  I am using the mobile broadband 3 & receive the following message if poster every time I try to connect: -.
  "Activation of the software has made '228' unsuccessful attempts to the type of carrier"WWAN". The software will be blocked for "WWAN" connections after that '772' more futile attempts. For more information, contact your system administrator'

  I can then open a session, but of course 1000 attempts I got fades quickly.

  I was told by 3 is not a problem with their s/w or h/w?

  I'm on a Toshiba NB100 & am running Windows XP. I suspect that there is a software conflict or that I made a mistake in XP "network connections and the Internet?

  The modem works without problem on my Toshiba Satellite 3000 - X 11 laptop.

  Thank you

  Hello

  You use the 3rd party modem.
  Have you checked the modem manufacturer page if such error is already known for guys?

  To be honest I have no idea what could cause this error, but it looks like that activation of the software has failed and you need to contact the manufacturer of the software for more details.

• Windows Malicious Software Removal Tool vs Malwarebyte Anti-Malware

  Explain the difference/other services/conflicts between Windows Malicious Software Removal Tool and Malwarebyte Anti-Malware.

  I currently use Anti-Malware in conjunctgion with KIS 2012.

  Hi RW,.

  Not precisely.  I say that the Windows Firewall is perfectly adequate, and I don't know any others that provide better protection (but others may have more options of configuration or bells and whistles, some will offer essentially equivalent protection, and some are not as good as Windows Firewall).  Of course, some will say that there are some firewalls that are better than the Windows Firewall, but is no longer a subject of debate and discussion than anything I saw firmly and convincingly demonstrated.  And we know that the Windows Firewall works properly with Windows and other Microsoft products and has great support.  And I never heard of software conflicting with the Windows Firewall, I heard things regarding 3rd party brands - involving mainly browsers, e-mail programs and security as well as configurations of network programs (not just internet, but internal intranet, you can have in your home using cables (, wireless routers/modems, infrared devices, bluetooth, remote deskop (internal or external) devices if used parental controls, interfaces with the security at home and/or surveillance systems wireless devices such as printers or scanners or fax machines and other similar things).

  Remember, without a firewall your computer give to anyone trying to access the system through any network or remote connection via the ports.  There are several ports, most average users never need.  The firewall blocks essentially all ports except those that are specifically excluded.  That's where you come in.  Each has a default list of excluded ports.  You must go through this list and remove all exclusions that you know you don't need (and be sure you KNOW what you have blocked before deleting the exclusion).  Each exclusion represent a hole in your security that an attacker could have access.  The less the better.  When I came through the list, I probably cut just a little less than 50% of registrants - but I cut some I used but rarely I would have rather the firewall blocks and make the extra effort to unblock port temporarily the few times that I need to leave open at all times.  Although for Vista, this article will help you understand the basic concepts of http://windows.microsoft.com/en-US/windows-vista/Firewall-frequently-asked-questions.   Attention to the last on the list because it provides links to other articles where you can get better and more information that can help you to choose and decide.

  I'm not going to argue here, since you have already the product and more.  This isn't what I would have chosen, but it is probably one of the best on the market suites and much, much better than some other choice, you could have done.  According to me, that it will probably do the job.  Quite simply, I don't know how good it is the Firewall works because I've never used this before then.  It may in fact be just as good and offer more features, or may not provide the same level of protection or cause any problems or conflicts with other programs or with your network (depending on how you setup).  I do not know.  You bought the suite because you wanted more features than just anti-virus protection.

  I think you can guess what I personally would do, but I can't advise you on what to do here - it's your software, your computer and your decision to make.  Don't forget that you can always disable the firewall in KIS and activate Windows Firewall (or the reverse), once you choose.  This comment in my post was directed at all the recipients and I didn't change it to you specifically - I mean not that it appear as more accurately you invites to spend now that you have already bought another product.  I was trying to say to people in general, he was no need to spend money on a separate firewall when the Windows Firewall has been excellent and would do the job perfectly well.  However, Windows Defender does NOT provide adequate and afflicted an antivirus program protection must be added (that may or may not turn off defender during the installation) to be sure.

  In short, the decision is yours to make.

  I hope this helps clarify things.

  Good luck and best wishes!

• OfficeJet 6700 Premium: Fax software does not load

  Hi people.

  I had my 6700 for awhile now, but only recently required the use of Fax hospital.

  What I've found, is that I have a problem with two things.

  When I open HP Print Wizard there are two things that start to load but never actually do. They hang around 50%.

  It's "Manage fax settings" and "digital SAF Setup Wizard.

  I tried to remove and reload the software, but no luck.

  Does anyone have a solution?

  Hi @BigDingus,

  Thanks for getting back to me.

  I see that you could reconfigure fax and digital fax, that is great to hear configuration settings.

  I understand that you have uninstalled and reinstalled the software, which does not seem to heal. At this stage, I can only assume that the problem is a software conflict, which blocks the ability to use these features in the HP software. The SAP offers same utilities, I would use the built-in Web server in the future.

  If you have additional questions, feel free to contact me.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Adobe Flash Player with RealPlayer browser 11. conflicted

  Hello. Adobe Flash Player has asked that I update for Adobe Flash Player 11.1. The installation of Adobe Flash Player 11. program wonder to disable {or uninstall} my download of the RealPlayer browser function.  I have a lot of my CD copied to listen to with RealPlayer.  I will lose all my music?

  Hi ClaraMeury,

  ·         You use Internet Explorer to download Adobe Flash Player 11.1?

  Follow these methods.

  Method 1: If you use Internet Explorer, disable the following add-on and try to update adobe flash player "Real Player download and record Plugin for Internet Explorer." Follow these steps:

  (a) open Internet Explorer.

  (b) click on Toolsand then click Manage Add-ons.

  (c) in the drop-down view menu, select Real Player download and record Plugin for Internet Explorer.

  (d) then click on disable in the information window. Click OK.

  (e) to exit, and then restart Internet Explorer.

  (f) download the update to Adobe and activate the add-on after the update.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem persists, contact Adobe support for more help and information.

  http://www.Adobe.com/support/

• Impossible to uninstall Logitech Webcam Software

  I have Windows XP sp3, IE8 and all updates. Except 3 Logitech webcam C615 updates that all 3 failed to install with the same error code 0 x 80070103.  I have installed and uninstalled my software of Logitech C615, drivers and all a few times, hoping to redo the programwork. The program worked the first time I added it perfectly for almost a week, then without my knowledge at the time I had 3 virus severe threat (which I've taken care of via MSE) a week or so later when I discovered it. I don't know if this is related, but the screen would go black and dead when we tried to use the webcam, it does simply not at all. It's weird that on the same day I've updated these 3 updates failed was the day that I got the virus. So, I uninstalled the program overall, thinking the problem was the webcam and re-installed. It's the same thing, and Yes, the drivers were very good. I had yet to understand and fix the virus. So, I uninstalled it again. Still it wouldn't work. Then, viruses have been found and fixed. Now, here is my current problem. I'm trying to uninstall the Logitech Webcam Software C615 Ain Add/Remove Programs, and it will not uninstall! I '; worm tried and tried. Whenever a screen that is supposed to appear and ask you what parts you want to uninstall tries to ride, flashes briefly and then disappears, leaving me unable to uninstall. I tried the fix from Microsoft, but it without success. All parts of the program that I finally tried to do an unintall advanced disappeared (I think) except the software part. Help! Thank you!            KinaPO

  Hello

  1. What is the full message of error/popup?

  2 have what Microsoft Fixit you tried to solve the problem?

  3 What problem confined to a specific program? You are able to uninstall other programs?

  Looks like some third-party programs is blocking. This can also occur if the computer is still infected with a virus.

  Method 1:

  I suggest to run the Fixit and try to uninstall the program manually.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  If you have already tried, you can proceed to the next method.

  Method 2:
  

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Step 1: Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 3:

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

   
  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
   

  If the problem persists, you can report the issue in the Logitech forums for more information:

  http://forums.Logitech.com/T5/webcams/BD-p/quickcam_software

  Hope this information helps.

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• Could not load the turbo tax software & this message "the EncodePointer point procedure entry is not found in the dynamic library KERNELL32.dll.

  Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll.     can someone tell me how to solve this problem?

  I have windows xp 2002 Service Pack 2

  Hi henryjeshom,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the application of Turbo tax.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem persists, contact support for Turbo tax for more help and information.

  http://TurboTax.Intuit.com/support/

• webcam works but the software cannot start the capture device

  Original title: webcam problems

  purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

  Hi reefwatcher,

  1. Did you the latest changes on the computer?
  2. You are able to use the webcam on other applications?
  3. You receive an error message?

  Method 1

  To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

  http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

  http://www.ikitmovie.com/free-trial-stop-motion-software.php

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 3

  If the previous step fails, then you will need to contact the software retailer for assistance.

  http://www.ikitmovie.com/contact-us.php