Software does not not with Vista

Similar Questions

• Vista Security Center alert (red shield) errors indicating security software (firewall, malicious software) does not not to start?

  Vista Security Center alert (red shield) errors indicating security software (firewall, malicious software) does not not to start?

  This problem has resurfaced. July 2011.

  2011 Microsoft Security Center alerts & errors?

  What The Red Shield keeps popping up with two questions in the Windows Security Center;

  (1) firewall does not run.

  (2) anit-virus Malware software is not running.

  Usually after a while it will reset and run, or I would go on the page of the security configuration to start a program.

  However, recently, the settings will not be reset, and it became an ongoing problem. He seems to have understood

  worse with Windows updates.

  He had a command back to review and reset the settings of windows Security Center in a solution under Windows

  but I wasn't able to find it again (the help has been restructured)

  I ran sfc/scannow, Glary Utilities, CCleaner and Advanced System Care.

  AntiVirus software are Microsoft Defender, F-Secure, Malawarebyes.

  I run Microsoft WindowsVista.

  Any help would be appreciated.

  Sincerely the rich;

  Hi rich,

  You may need to install the hotfix that is described in the following article and see if it helps:

  Windows Security Center does not detect the antivirus application that is installed on a Windows Vista-based computer

  Hope this information is useful.

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Scanning for ScanJet G3110 software does not install

  I downloaded the latest version of the software recommended directly from the HP support site.  Operating system is Win7 64 bit. The Setup program ends in a few moments with no error message, but I don't have desktop shortcut icons. The installation program creates the folder: "C:\Program Files (x 86) \HP\" with two subfolders: 'Temp' and 'Digital Imaging '. Digital imaging files inside I can't find many application files and it is not the application of \bin\hpqkygrp.exe.

  On a pc with windows VISTA and default CD Installer evertything works very well.

  I noticed a lot of missing files from installation, as a common folder. The pc's in a network domain and I launched the configuration in the user domain and domain administrator.

  I tried several times in different days/months/updates to day... Please help.

  Just because the HP scanning software does not work I can not restore my entire system, I can't accept this as a solution.

  I tried System File Checker (0 problems) and to boot, the problem "remains the same" (see Led Zeppelin).

  I finally found a solution, I installed NAPS2, available at sourceforge.net/projects/naps2/ free scanning software.

  Best regards.

• Fingerprint software does not recognize my fingerprints

  Hello

  I installed the 64-bit Windows 7 (using cd upgrade upgrade to win7 program)
  Installed all updates (windows)

  However, fingerprint software does not recognize my fingerprints-. -.
  The first two are fine, but the third party never works, it's the same story for all my fingers...

  I HAD the program works perfectly until I reinstalled my OS
  For some reason, I remember the same problem last time I had to reinstall, do not remember what I did to remedy

  any advice?
  Thank you for your time and help!

  Edit:

  To add a few details:
  It worked before
  The hardware is not the issue (he reads my fingers)
  It is software or just my DNA changes my fingerprints-. -.
  I can't remember which version of the software / I downloaded the last time, but I find the latest software online on this site and found

  In addition, the FACE program does not work either
  He was working before I reinstalled the operating system
  Is it just me or all the security programs like simply not me-. -.

  Hello

  In your case, I recommend you remove all traces of fingers first.
  Then, uninstall the software and clean the registry with CCleaner.
  Then download the new software for fingerprint for the computer laptop and Win 7
  After that, scan and configure the fingerprints once more.

  In regards to the face recognition software;
  You must uninstall this too and need to download the latest version of this software for Win 7

  Good luck

• DMM software does not.

  Why the digital multimeter (DMM) software does not work if the NI ELVISmx Instrument Launcher is?

  Initially, I installed subsequently myDAQ NI 2015 that included the NI ELVISmx Instrument Launcher containing the DMM software. Other pieces of software work however, the DMM stalls immediately after starting with a NI Instruments loading bar.

  I tried the repair option of software specifically for the NI ELVISmx driver and also tried wiping clean and reinstall fees. By receiving the same result.

  
  

• XPS 1530 internal mic not working not not with Vista

  XPS 1530 internal mic not working not not with Vista

  Hello ThomasBarnette,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, it seems that you are having problems with the internal mic.  As I understand the internal microphone does not work.

  Download and install the drivers for the Chipset from the link below and check.

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-M1530

  Answer to us if you are having problems with the internal MIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Software does not open after installation on Windows 7

  I have a Photosmart 6280 all in one and once the software is installed, the program will not open. Was on the phone with a guy from HP for an hour and he couldn't help. Time to work with Win 7. Anyone has any ideas. Done an uninstall and still does not. I like Win 7, but sure would like to get my printer working.

  Have you tried to install the latest drivers for Windows 7 and the software from the following link for your printer?

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4062&LC=en&DLC=en&cc=us&lang=en&product=3194498

  In addition, when you mention that the software does not open, do you mean the HP Solution Center software?

  -------------------------------------------------------------------------------

  I work with HP, but these comments are my own and not from HP

• BlackBerry Z10 BlackBerry Desktop Software does not support the BlackBerry 10 operating system

  I am wanting to sync the Z10 with my Mac andhave times link BB and BB Desktop Software but the message it gives me is:

  This BlackBerry device running the BlackBerry 10 operating system.  BlackBerry Desktop Software does not support the BlackBerry 10 operating system. Visit www.blackberry.com/support to learn more about how to synchronize your multimedia files, backup and restore data from the camera and more, with your device.

  All software are up to date on Mac and BBZ10

  What should I do?

  You have the two desktop software and link configurΘ for dΘmarrer when a device is connected to your Mac. You must go into the Desktop software settings (I don't remember exactly what to do, but there should be some settings at the top right) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that the link is set to open. That should solve your problem.

  Let us know if that helps you.

• No aero effect. I have a hidden partition on my HARD drive and my clone of samsung software does not work.

  Hello

  I used tune up utility (now uninstalled) and can no longer apply themes - I have try the effect Aero troubleshooting but convenience store says it cannot identify a problem. How can I get Aero goes again?

  2. I am trying to clone my HARD drive through of an SSD, but I have a hidden partition on my HARD drive and my clone of samsung software does not work. Any thoughts on how to work around this problem?

  Original title: two issues with win 7 Home premium

  Hello

  I used tune up utility (now uninstalled) and can no longer apply themes - I have try the effect Aero troubleshooting but convenience store says it cannot identify a problem. How can I get Aero goes again?

  2. I am trying to clone my HARD drive through of an SSD, but I have a hidden partition on my HARD drive and my clone of samsung software does not work. Any thoughts on how to work around this problem?

  1. with respect to the first question: your system files have been corrupted. Do a System Restore before the app was used.

  Try you "tune up", "maximize", "registry cleaners" or any what kind of app that promises to improve the performance of your PC somehow. None of them improve anything, often at the antipodes (as you discovered). Microsoft W7 already has all the apps. you need to keep your PC in tip-top condt. Try not to add anything.

  All these various named apps. are all 'snake oil' and very dangerous to use. However, you will find a lot of 'logic' online promo. material from "authoritarian" sites as to how will be beneficial for your PC. Not drawn in by these Advertorials :)

  2 the hidden partition is probably "restore to factory condt." partition rescue/recovery of the manufacturer of your computer. This can be used for the rescue of PC when things diabolically wrong with your operating system and cannot be set by any other means. You need an ISO image (clone) of the OS partition and MBR (master boot record) only, not the entire HARD drive.  Including the partition of relief are a very good idea but I'm not familiar with the software cloning you use.

  Download Macrium Reflect free edition for purposes of cloning and recovery and make the CD

  image recovery disk. He advises you to do so (by steps in the simple wizard driven) before using the program for anything regardless of whether the image.

  What computer brand and model you are using?

• HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

  Windows 7 Pro 64

  Reference Dell

  Printer connected via ethernet

  software worked well until the printer has been replaced by HP under warranty

  in the new device, the screen of the wizard to set the time/language etc.

  Software HP does not detect the device and so I can not use all the features.

  I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

  Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

  Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

  Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

  I also tried downloading drivers/full later on the HP site.

  Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

  Hi-Dillion, Declan

• my adobe reader software does not work properly always receive a message (not), why?

  my adobe reader software does not work properly always receive a message (not answer), then on the right Circle loading then suddenly stop and then become white background as shown below, why?

  I can't read any pdf file and I try to update the adobe reader and acrobat software, but nothing has changed.
  

  
  

  My (certainly old and slow) system made too the first time I opened 11 player, but he "thawed" after fifteen seconds, (an eternity in computing time, I know, but it has finally opened completely) what you see to the right is the "Tools" palette during initialization. That's exactly where mine would freeze at startup. Once he finally opened fully, I clicked on the "Tools" link at the top to close the Panel, and I opened and seen a document in this way and then closed reader. Now when I open the drive, the tool palette is not initialize and it opens immediately.

  Restart and prior to open what any else, open the drive. When you open it, DO NOT try to do anything with it until it fully opens, do not click on anything that it either, do not try to switch to another app give it time to open up completely and then click the tools link to close. Then open and view a document and close it. Close the player and reopen it. the tools Panel should stay closed and reader should open completely immediately.

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• OfficeJet 8600 software does not

  I used the hp 8600 pro all-in-one for some time now without any problems.  I have windows 8.1.  the other day I tried to open the hp printer also from the desktop scanner and the software does not open.  I am able to print anything on the desktop and scanning to the desktop of the printer.

  I deleted the software and drivers and reinstalled everything.  Always the software does not open.

  The problem seemed to start after I caught the binkiland virus.  I bought spybot to remove it.  I have used spybot before and didn't have any problems later.

  Any ideas?

  Hello

  Try to install the patch below, I think that might help:

  http://support.HP.com/us-en/document/c03659948

  If that doesn't help please let me know the exact behavior while trying to open the HP Officejet Pro 8600 software.

  Kind regards

  Shlomi

• LightScribe software does not recognize my DVD LightScribe drive. Can help any one? __

  LightScribe software does not recognize my DVD LightScribe drive. Can someone help?  I belive what happened after I enstalled Windows 7!

  Have you installed the latest http://www.lightscribe.com/downloadSection/windows/index.aspx?id=810 Lightscribe system software

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.