Software for the NI 9233 Impact hammer trigger

I'm collecting data of a built-in beam. I installed the test of impact labview module to acquire data with fmax 1200Hz, sampling frequency - 3000 Hz, to acquire data for about 0.9 seconds with a = 1.2 Hz frequency resolution.
He shows me the impact when I run the software, but does not collect or store data. Finally, an error saying: trigger software has expired. Also, I put the number of samples to 2500, but I get a message that the samples must be greater than 0 which I can't understand.
How am I suppose to collect data for impact at the time and he averaged? I tried N samples and run once options.

If you could help me out with this it would be great. Thank you very much.

Hi StuMtu,

The two properties to set to clear the errors will be to increase the time-out in the step of trigger Setup tab. You must also make sure that you are going to be exciting the hammer than the level set out within this time limit, otherwise you will get the timeout error.

The other error you receive should just happen when you try to set the number of samples to averageto zero. If you set a higher number, the error should disappear. If it still does not work, you can try putting a new stage with the appropriate settings to see if the error persists.

Kind regards

Kent

Technical sales engineer

Tags: NI Products

Similar Questions

  • There was a problem downloading the software for the iPhone error - 39

    My iPhone 4S device is disabled, connect to iTunes, when I was connected to the laptop cannot restore and give this massage:

    There was a problem downloading the software for the iPhone "iPhone". An unknown error occurred (-39).

    Make sure that your network settings are correct and your network connection is active. or try again later.

    Hi mgdabko!

    I see that you get an error message when you try to connect your iPhone to iTunes.  I know it's important to have your iPhone works properly, and I'm happy to provide assistance.  39 error often indicates there is a problem with the internet connection you are using, so you should try another Internet if possible.  You can also try all the advice in the following article:

    If you see an error when you update or restore your iPhone, iPad, or iPod

    Thank you for using communities of Apple Support.

    See you soon!

  • Re - install the software for the printer C6280 all in one... get a "file not found" error message

    you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

    the 7z256315 folder does not exist on the hard disk.

    I also have a message that it cannot find PS_A10_02_software.msi.

    Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

    I hope you can help

    Thank you

    Charlie

    Hi cberistain,

    Follow the steps below and let me know what happens?

    First step: clear temp directory

    1. Type %temp% term or search programs and files of field
    2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    3. Proceed to step 2 below

    Second step: downloaded and extracted to your system:

    1 download the drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

    2. once the download is complete, double-click the file to extract the software.

    3. when the installation window opens, press the Cancel button to stop the installation

    4. tap folder in the race or search programs and files of field

    5. Locate and open the folder starting with 7z (example: 7zS2356)

    6. right click on the folder and select copy

    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

    8 open the 7z, that you just copied on your desktop

    9 open the Util folder

    10 open the CCC folder

    11 start the uninstall_L4

    12. once the uninstall is complete, restart the computer

    13. run disk cleanup from the tools Accessories\ system under all programs folder

    14. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know if you are able to successfully install the software and driver and are able to print and scan?

  • Zbook 15 G2: Zbook 15 G2 - which required software for the connection of fingerprints on Windows 7-64 bit (company)

    The problem is quite simple, but the answer seems to be quite elusive.

    I have a new Zbook 15 G2.  It is a work laptop and they apply a standard image using Windows 7 Enterprise.  Unfortunately, it does not all support for the fingerprint readers by default.  I have admin access so I am allowed to load the appropriate drivers/software

    But I can't seem to find the correct drivers.  When I search by serial number I get the driver of fingerprints of validity, but it doesn't seem to be a specific software for the use of the connection for Windows 7.  I had several years ago, under the old HP of ProtectTools.  Now, I also see references to Client Security Manager and SimplePass (the latter being the most recent according to a table).  I installed SimplePass but he doesn't seem to see the fingerprint reader (or it is not optional).  Device Manager shows the fingerprint under Biomentrics reader and shows it works normally.

    Can someone clarify the situation exactly WHAT must be loaded on the assumption of a new installation of Windows 7?  I can take it from there I think, but without a list looks a bit like a crap-shoot to get the right software installed in order to support.

    Thanks in advance!

    Jerry

    Hello:

    It has always been my experience that workstations and laptops professional use security software to protect the tools which has now been replaced by the customer Security Manager software on the newer models like yours.

    Consumer class specifications use the security software simple past.

    So, if you have installed the validity fingerprint driver, my recommendation would be to install the last client security manager software to register your fingerprint.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_146787_1#tab1

  • Latest Version of the software for the Krave

    I was wondering if I had the latest version of the software on my phone. I have BLAZE1_01.28.02P. I checked to see if an update is available on the Motorola Web site, and he told me that he was not. However, when I updated to BLAZE1_1.19.09P last year, in a first time he told me that he had no update and I got the latestet version. I had read that there was a more recent one version, so I tried again, and the second time it worked. I do not trust it now, and I don't know if I really have the latest version. Could someone tell me if BLAZE1_1.28.02P is really the latest?

    asvma:

    Yes, BLAZE1_01.28.02P is the latest version of the software for the Krave ZN4.

  • trying to find software for the xbox 360 controller

    Ive been trying to connect my principle wired xbox 360 to my computer that has windows vista but he says he can't find software for the principle help me please

    Hello

    Download the software from the following link:

    http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

    See the following article:

    How to connect your Xbox 360 wired controller to a computer running Windows

    http://support.Xbox.com/en-in/Xbox-Live/connecting/connect-wired-controller-to-computer-running-Windows-906347

    For reference:

    Troubleshooting your Xbox 360 Controller for Windows

    http://support.Microsoft.com/kb/908888

    For further assistance should your Xbox application supports. Here is the link:

    http://support.Xbox.com/en-us/contact-us

    Thank you

  • There was a problem downloading the software for the iPhone. The network connection timed out.

    Original title:
    Network discovery sharing sharing inbound network incoming Remote Desktop RDP TS Remote Desktop Remote Assistance Network
    -----

    My computer can not down load the version the most recent for my I Phone it says:

    There was a problem downloading the software for the iPhone. The network connection timed out.
    Make sure your network settings are correct and your connection is active network, or try again later.
    IM Online hole time and ive tried for months

    Hello

    ·         What software you want to download?

    ·         You have an earlier version of the software installed on your computer?

    Method 1:

    Try to download the software by disabling add-ons: http://windows.microsoft.com/en-us/Windows-vista/How-do-browser-add-ons-affect-my-computer

    Method2:

    Try disabling the anti-virus and then check if you can download the program.

    NOTE: make sure that you enable the antivirus protection as soon as the diagnosis is completed.

    Method3:

    Reset Internet Explorer, and then try to download the file: http://windows.microsoft.com/en-US/windows-vista/Reset-Internet-Explorer-7-settings

    NOTE: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

    You can also post your questions on the apple forum by clicking this link: https://discussions.apple.com/community/iphone/using_iphone

  • BlackBerry Smartphones Blackberry Destop Software has no software for the device that is connected

    I just bought a Blackberry Curve 8310.  I downloaded the desktop software and I wanted to update the software. When I do this it is said that the Destop software does not have the software for the device that is connected.  Help!

    Want to update to?  If you just bought it, it is likely that he is already up to date as far as business is concerned.  If you want the most recent update, then click on the link below:

    http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/151886-latest-OS-8310-4-5-0-108...

  • Hi, I have Acrobat 11.0 win AOO license IE, I want to download the software for the same thing.

    Hi, I have Acrobat 11.0 win AOO license IE, I want to download the software for the same thing.

    Hello

    Please visit the Adobe license | Serial numbers | Orders | Accounts

    Hope that helps!

    Kind regards

    Sheena

  • On the "Image Enhancement Utility" software for the Qosmio series

    Hey all,.
    As you may know, the utility of photo development is responsible to define the image quality in 3 software: Windows Media Center, WinDVD & WinDVR.

    It gives more bright colors, a picture more clear and other improvements in the display mode full screen.

    I was wondering if it is possible to have the image Enhancement Utility affect the image quality of other software such as Windows Media Player, Zoom Player, Media Player Classic or other players.

    When I got my Qosmio, I didn't expect the Qosmio announced engine (which is controlled by the image Enhancement Utility) to be only compatible with the 3 predefined software!

    I think it would be great if Toshiba could specify the software for which we want strengthening of motor Qosmio image, as an option in the "Picture Enhancement Utility.

    I really hope that Toshiba will hear the appeal in the wild. ;)
    Next time!

    Alcahest

    Hello

    As far as I know this utility allows you to change the image quality depending on your viewing environment and also allows you to select external input parameters for video camera, games consoles etc. That s right it works with Media Center, InterVideo WinDVD and InterVideo WinDVR because these programs are pre-installed on the device. In my opinion, the development of photo utility is a very nice utility and as far as I know inimitable.
    You cannot expect that this utility must works with all kinds of programs, but maybe the next version has a few extensions ;)

    Best regards

  • Satellite L350 - software for the FN keys

    What software do I need for the FN keys? My computer laptop Satellite L350 is not function now.
    (Sorry I'm Czech, my English is not good)

    Hello

    If you are using Windows Vista, you must install Toshiba Value added Package. This package contains drivers for the FN keys do you mean. Installation is pretty easy, you need to do is follow the on-screen instructions and restart the laptop.

    Here you can download:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    I hope it works for you. :)

  • Is there an OCR software for the all-in-one series D110 printer?

    I have a HP Photosmart D110A and you want to scan to indexed pdf file. I can do with this printer?

    Hi there carlosw,

    There are TONS of OCR options out there. Even if your printer is not necessarily delivered with a release of box OCR solution you can always us third-party software to do what you are looking for. Here is a link for the top 5 free OCR software tools. The article is a bit dated you can search in your favorite search engine to find the solution that best fits your needs. I went to the Microsoft Office Document Imaging or OCR via google Docs, as I have already included it with office and use google Docs quite heavily. Let us know if this can help, or if you have any other questions.

    Good luck!

  • Software for the disc md1000h of HP SimpleSave external hard

    Hello

    Due to some problems I had with double back-up on my hard drive, I decided to just format the hard drive and start on a table shaves.  However, I see the user guides on the support page for this product (http://h10025.www1.hp.com/ewfrf/wc/product?product=4023091 & lc = on & cc = us & dlc = in).  Where can I access/download software?  Also, once that I have the software, what do I do with it?  Is it just a matter of unzip the contents of the file on the hard drive?

    Thank you in advance!

    Kevin

    Hello Smash,

    I can tell you that it is something that HP is not easy for someone to find.

    Download link for the SimpleSave software for your model.

    EDIT: this link is no longer available, HP no longer provides the download.

    Unzip the content in the external drive HP, NOT your computer.

    The content contains an autorun.inf file that will allow the software to run when it is connected, if Windows is configured to allow autorun programs.

    If she's not autorun, you can open the external hard drive and click on the exe file yourself.

    There is a user manual in a folder of the zip file as Documentation that you can read. Look on page 6.

    This should do it for you.

    It will be useful.

  • ScanJet 4890: Problem loading software for the scanner

    When I try to load the software from the CD, it tells me that I must have administrator rights, tells me to connect off & on again.

    When I do all this happens just with the absurdity even. How to overcome this obstacle annoying & useless?

    (And yes I AM the ADMINISTRATOR)

    Hello

    The Scanner is old enough, it was made in a preliminary manner release of Windows 7, and thus the CD is not designed for Windows 7.

    Download and install the software Windows Visa and stable on your Windows 7 machine using Compatibility Mode.

    First save the Vista software below on your computer:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=447377&swItemId=sj_50009_1&swEnvOid=2100

    Then install it using Compatibility Mode by following the instructions in the following article:

    http://h20566.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03129972

    Kind regards

    Shlomi

  • Where can I get the software for the multimedia keyboard KU-9963?

    I have a multimedia keyboard HP KU-9963, but can't find the software to configure the keys of those.  Any help would be appreciated.

    Hi, John:

    I had once a Business Desktop d530 with a keyboard with about 8 buttons or so who launched applications.

    Just as a shot in the water, maybe you can try this driver for the keyboard, I had of the d530 in the chance that it will work.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=316720&prodNameId=316722&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-45469-1

    Paul

Maybe you are looking for

  • can someone tell me what translator tool it was?

    He had a red/blue button T on the top of the right side, all I had to do is to select a button t on the top of the right side and its translation in English, has been translated into English by default, I lost my old Firefox I want to know the name o

  • Satellite P300-no more wireless since yesterday

    Hello worldSince yesterday, my wireless function no longer works.Internet still works with the ethernet cable. I am also able to enter the menu of the router (192.168.0.1, without ethernet cable) config.I did install a new software recently. What cou

  • Satellite L655 - update for the AMD display driver

    Why he did there not update for ATI driver Satellite L655? I want to use AMD app functionality which is supported by ati hd 5650, but programs that want to use this feature says I need to update the display driver. The AMD driver said he is not taken

  • Y460 TICKING

    When I start and use my Y460 with Windows 7 HP 64 - bit EE, I hear a ticking sound incompatible, which is not the same frequency as the blinking of the hard disk light activity. Is this a hard drive problem, a fan problem or other hardware problem? P

  • HP COLOR LASERJET CP 1215 printer

    When I print on my printer, the shadow (very clear) text or image Printed will appear later (downstairs you original text) so the text appears double. I use the cleaning of the my printer HP software tool, but the problem persists. Comment do I do to