'Software update' has not worked for a while?

Similar Questions

• My Windows Update not more? My software update did not work for months?

  My Windows Update is not more?  My software update did not work for months ?

  Hi Jacc,

  1. What is the question you are faced with Windows updates?

  2. you get any error message?

  3. you are facing problems during updates or install updates?

  4. what software update you speak?

  5 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997/en-us

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore

  A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore. How can I get a new one

  Skip, enter the product key, and then complete the installation.

  Try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Mini HP which has not worked for a year at least.

  We have a mini HP which has not worked for a year at least. I try to get back to work and am getting a screen that says: enter the administrator password or start on password. Then the disabled system 83656543. can you please help?

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS ( f10 ) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.

  Post back with the details of any error message.

  Note:  If the option to run these tests is not available in the Bios Menu, use the menu diagnosis f2 .

  Kind regards

  DP - K

• He has not worked for me! Help!

  /Resetnavpane Outlook fix did not work for me.  He always gives the same error message. I have Windows XP.  Also it shows me a symbol of prospects for Ghost in the taskbar as if some outlook file is running in the background.

  Ideal if you are looking for the answer in the Outlook forum. Be sure to mention that you are using XP.
  Link to Outlook:
  http://social.answers.Microsoft.com/forums/en-us/outlookacct/threads

  You are at Vista forum.

  t-4-2

• The problem of Apple software update has stopped working

  The Apple software update program does not work after update to iOS 9.3 as seems.

  
  

  Apple software update server error message cannot be found. Check your internet settings and try again.

  My settings are fine

  
  

  Thank you
  

  
  

  Many users of older devices have encountered problems to update their devices.

  Take a look at these articles for additional information on the issue:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

• Unlocked blackBerry Smartphones Software Update has not received the AT & T brand PRIVATE when you use a non - AT & T SIM card

  Dear whom it may concern,

  I saw one of the support forum of Blackberry Web site on "software update, not received the AT & T unlocked brand PRIVATE when you use a non - AT & T SIM card". How can I receive the OTA update in the notification bar?

  Now, my OS is Mashmallow 6.01 build No.. AAF355 (June 1, 2016) or do I have to update (auto loadder) my Priv to AAG873 in order to get the direct OTA from Blackberry in the future.

  Thank you

  Good questions. I can speculate only at this stage. I guess that since it is updated by BB, they use a revision update for all devices to facilitate management. AT & T updates their different, since they have different methods of approval (Note T-mobile even updated as unlocked devices). Unless you want to get specific version of AT & T that could fix something that the other version does not work, I'd wait for the OTA. I did three refills of OS because I couldn't OTA of AT & T, and they take a lot of time. Take the time then to restore and to reconfigure all the settings you had before. Not funny.

  To be more precise questions. Depends on you, but for me, would be updated via OTA only now that it's available. Yes, if you want auto charger, use AT & t. even as before, wait for OTA, unless you have a specific automotive need load the operating system.

• Update does not work for Win7 winsxs\manifests\wow64_microsoft-windows-security-schannel

  For Win7 Sp1 security updates (i.e., KB3057154, KB3067505) fails with error 80073712.

  Detected in the newspapers of update today (when you start to get the Win10 package) this error started two weeks ago.

  KB947821 shows running: found 1 errors
  Manifest CSI has not catalog check Total number: 1

  Unavailable repair files: winsxs\manifests\wow64_microsoft-windows-security-schannel_31bf3856ad364e35_6.1.7601.22948_none_8afe17e8b9758d0c.manifest.

  Have not found a way to get rid of manifest error (apart from reinstalling). Tried a repair tool, but did not see that any action for the manifest file so did not buy them.

  Tried to recover, but he took no older history except the last two days

  Have you checked the system files OK, have always had Security essentials running and did a total scan OK.

  The manifest file has been created/modified in February 2015!

  Do not use the advanced computer, only email and e - bay.

  Any ideas what to do next to avoid total restoration?

  Kind regards

  Inspired by https://technet.microsoft.com/sv-se/library/ee619779%28v=ws.10%29.aspx copied the manifesto of an installation of work to %windir%\Temp\CheckSUR\winsxs\manifests\ on my machine and run the system update readiness tool. Which corrects the problem.

  So now the updates are installed without any problems.

• iMac 3d party software updates do not work

  I have an iMac 27 OS 10.11.3 24GO RAM and enough hard disk space. Have now two 3d-party software/applications that require updates. Download software updates and then ask ok close to installation of update. This is done, but no update is run and once again demand even the update appears on the old version of the software. I can handle this with a manual download from the web page of providers, but this is not how it should work! No idea where this can be fixed/fixed?

  Have you been in contact with the developers of the applications to see if they are aware of similar problems?

• Apple Watch 2 software update does not work

  Why not improve my iwatch?  Hanging installation. To install the update, Apple Watch must be connected to the charger (what is) and less than 50% charged (mine is 100%). Click on the ok button and nothing happens... of ideas? This is a question asked by another disciple of Apple and it did not or at least the answer did not work.

  What you are trying to update? WOS 3 is the last update on the new apple 1 & 2 series that comes with them. OR do you have the first Gen model?

• Windows Update does not work for five updates to Vista x 64.

  Updates are identified as KB2378111 KB967723, KB235886, KB970430, KB972145.  I am running Vista Ultimate Edition with service pack 2.  Whenever I tried to load updates 'failure '.  This happens on a daily basis.  The error code is 80070490.  Assuming that these updates are important, what should I do to load?  Assuming that these updates are not important, what should I do to "erase" the queue of the Windows Update?

  ERROR_NOT_FOUND 80070490
  Windows could not search for new updates

  Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2 under the resolution on this page - see
  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Don't forget to download and record the version of readiness (CheckSUR) system update tool corresponding to your system architecture.
  If you don't know what it is, click on the link under "If you are not sure which edition of Windows is installed, follow these steps:"for "
  Method 2: download the update directly system preparation tool from Microsoft Download Center .

  Once the download is complete, configure the computer to start in minimum mode - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  Restart the clean boot state and run CheckSUR with the system connected to the internet, you will need to download files.

  NOTE: in the Clean boot state all the 3rd party firewall will be disabled.
  Click on the round to start, in the Start Search field type in the firewall.
  Click on the link to the State of the firewall Check to verify that the native now on Vista firewall.

  After that end run CheckSUR, cancel the clean boot procedure, and then restart.
  If a 3rd party firewall is used, ensure that it is now and the native Vista firewall isnot.
  See if the system can update now.

  If it still cannot be updated, please post the contents of one of the newspapers that CheckSUR created when he ran.
  They are in

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheclSUR.persist.log

  And, please copy & paste lines for 50 or so of WindowsUpdate.log as well as one of the CheckSUR newspapers, too.
  How to read the Windowsupdate.log file

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Software update does not work it keeps trying to connect in vain for updating the server.

  First message box: "It is strongly recommended that you apply this update as soon as possible..." Next (click Next)

  Following message box:
  "Download Firefox... "Connection to the server to update.
  Moving green dotted line shows the current connection but nothing happens, so I close the box when I shut down the computer - sometimes hours later.

  The best is to go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer on your desktop. Closing Firefox. Run the Setup program and re-open Firefox. If the update fails the next time, open a new question or post here.

• retailer 4.1 Nokia Software Update does not work on my windows 7 64 bit. Why?

  nokiaSoftwareUpdaterForRetail.ErrorHandling.Exceptions.UnexpectedErrorException: activation of logic is broken---> System.BadImageFormatException: is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
  at Nokia.ProductApi.ProductApiLoader.ProductApiLoaderClass.LoadFromPath (String bstrPath)
  at Nokia.CareSuite.ProductAdaptation.Papi.InitializeProduct (String papiPath)
  at Nokia.CareSuite.ProductAdaptation.Papi.Initialize (String papiPath)
  to NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.InitializePapiProduct (DataPackage dataPackage)
  at NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.InitializeSelectedProduct)
  at NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.RunInternal)
  at NokiaSoftwareUpdaterForRetail.Castor.CastorEngine.Start)
  at NokiaSoftwareUpdaterForRetail.Logics.RetailLogic.EnableAllLogics)
  -End of the exception stack trace internal-
  at NokiaSoftwareUpdaterForRetail.Logics.RetailLogic.EnableAllLogics)
  at NokiaSoftwareUpdaterForRetail.App.TaskDoWork)
  at System.Threading.Tasks.Task.InnerInvoke)
  at System.Threading.Tasks.Task.Execute () at NokiaSoftwareUpdaterForRetail.Logics.RetailLogic.EnableAllLogics)
  at NokiaSoftwareUpdaterForRetail.App.TaskDoWork)
  at System.Threading.Tasks.Task.InnerInvoke)
  at System.Threading.Tasks.Task.Execute)

  Request to give me this error... Please someone help me

  Hello

  You can contact the Nokia support for assistance with this issue. They would be able to better understand this problem and could help you if you are missing on the pre-requisites that requires the 4.1 update to work on Windows 7.

  I hope this helps.

• Why is Microsoft doing a software that does not work for people?

  So here we are with windows seven. When you try to select multiple files, sometimes you gotta use the command key. So if my cursor is a little off, instead select the files, it will copy their jn location you are working with. What other software functions uses the control and click left button in Windows seven? How does make things easier for me if you accididentally click on something at the wrong time or off track-is which means that no matter the level, you are working with Microsoft - we have to take each individual file to copy or cut and paste because I do not do anytyhing thing who will be allowed to work with several files at once.

  I want to activate the option "Use check boxes to select items" folder view when you do this kind of thing.

  http://www.howtogeek.com/HOWTO/7888/how-to-enable-check-boxes-in-Explorer-in-Windows-7/