Solid black line on the screen of the HP Tablet

Similar Questions

• the presentation of the screen on my monitor is slightly off center with a thin black line on the left hand side. Ho can I fix this. I am running Windows 7 with a monitor Samsung SyncMaster SA10

  The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this?  I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.

  Any suggestions to adjust welcome.

  Thank you.

  The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.

  Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.

• Dell Inspiron 15: Vertical black line on the screen.

  Dell Inspiron 15 , I bought about 8 months ago. The specs are as under: -.
  Intel Core i3 3217U clocked at 1.8 Ghz
  4 GB RAM DDR3
  1 GB Intel HD 4000
  1 GB AMD 7670 M (switchable)
  500 GB HARD DRIVE AT 5400 RPM
  Windows 8 Core 64-bit Edition

  The laptop was working absolutely fine with no problems until yesterday. Today morning when I turned on the laptop, I noticed a vertical black line on the desktop with an endpoint at the end of the line on my screen. At first I thought it would be a graphic bug which would disappear on reboot, done repeatedly, but no avail. The black line is more noticeable on a light background.

  Laptop has not been submitted to harsh handling or stress. What could be the cause of it? Is it a manufacturing fault or something else?

  I am attaching 2 photos of the screen from different angles to obtain a correct and complete line. Please tell me how should I proceed from here.

  

  

  Contact Dell for a replacement of the LCD warranty.

• I am using captivate 8. The clarity of the published files are poor with black lines on the screen. Is there a way to fix this?

  Hello

  I use 8 Captivate. The clarity of the published files are very poor. It has black lines on the published file. Please suggest if there is a solution for this issue.

  Thank you

  Saida

  Hmm, Milot, why change the top instead of optimized to drag a quality which is the default setting in CP8? And why to substitute the quality of the blade in the preferences, if it is already set to high? I would like to know the reason, always eager to learn. I know that sometimes high leads to reduce the size of the file, but did not know that there has been better.

  My advice would have been to uncheck all the Compression settings in the preferences, size and quality. And I would like to know if the project has been recalibrated, if images have been resized.

• Black lines on the right side of the printed document Hp 8600 N911g

  I have problems with my HP 8600N911g.  I have several vertical black lines on the printed page of right hand margin.  This only happens when I copy or scan. Printing from my pc is fine.  I did all the cleaning, cutting for over an hour and reset to factory default.  NOTHING WORKS.  Help, please.  I love the printer hp but tire of their problems, which are few, but when they occur, they are doozies.

  I am on Windows 7

  Hi peggymay.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with black lines on your scans or copies.  I had this problem myself on my 8600 very clean and I was able to get it to be resolved. The question arises in fact from two locations and with a little luck, we can get this problem solved for you. First thing to look at is under the hood of the scanner. Lift the cover on the left of the large scanner glass and scanner, you will see a small strip of glass. Take a glass clear cleaner and a lint cloth and clean the small glass placed as well as the large glass. On the underside of the lid, you will see a white plastic strip. Please clean it as well. IF you have already done these steps please proceed to the next step.

  The printer power cable must be connected to a wall outlet and NOT a power strip/Bar. HP printers have built in surge protector and if you have it plugged into a strip/Bar, the printer will NOT get all the power needed for the proper functioning and it will cause problems with scans or copies, and it might even generate false error messages on the printer screen.

  Please try these steps and if they work, fantastic. But if they are not, please do not hesitate to write me again.

  I thank very you much for your time.  Always happy to help.

• There is no such thing as a black line on the content of folio in the viewer adobe after update.

  Several days after an update of a shared folio in the viewer Adobe (iPad Retina), there is a black line on the content on the right side of the screen (possibly a the scroll bar that no scrolling). There was also a notification that an update was available (downloaded very quickly, no updates had been pushed in days). This line does not exist when you use the Office Viewer, non-retine iPad or iPhone.

  Please see other threads on the subject.

  It is currently under review

  This seems to be a problem with Content Viewer (v32.5) in the App Store.

  If I build one from the App 32.4.4 Constructor (same v32.5), the bar is in its original position.

  Not a solution, but could be a workaround for some until this problem is corrected.

• Small black lines on the sides of the integrated video Youtube

  I joined a number of youtube videos in a simple html doc. Most of them seem to be good, but there are 2 has a slight black line on some of the edges. I really need them to be crispy like the others. The video on YT doesn't have those same black lines. Anyone know how to remove these?

  http://www.intellicom-analytics.com/jcuundergrad.html (The right side of the first video and both sides of the last video)

  Note: I am not owner of the videos YT incorporated is not possible to change them at this end.

  Thanks in advance!

  The black lines are the result of a mistake in setting the original size video/video proportions. And these line are visible in the original YouTube videos... especially a problem in the image of "post" that appears before the beginning of the video. See here:

  http://www.YouTube.com/v/y5uVqOuMdCw?version=3&autohide=1&showInfo=0

  and here:

  http://www.YouTube.com/v/na1e9uLImIU?version=3&autohide=1&showInfo=0

  The lines have nothing to with your video player on your page or you can correct it by changing your Web page... the lines are part of the video itself.

  To correct this problem, you must perform a new rendering of the original video file... NOT the Youtube file, but the original.

  If the player holds the original aspect ration (width to height), the video will be resized to fit the dimensions of the player... but if the player is not big enough or wide enough... the black bars appear... that aren't black bars but space empty that the video did not cover. Black bars on the sides of the clip mean that the size of the screen is not big enough. Black bars on the top/bottom, means that the screen is not wide enough.

  These black space "bar" can also be introduced during the editing process if the dimensions of the screen are not properly defined... which seems to be the case here video moose.

  Best wishes

  Adninjastrator

• Incoming Fax page, left thick black line down the side edge

  Hello

  I recently bought a HP Photosmart 7520 printer and had to return because of a wrong switch ON / OFF the printer.  So I returned and bought another. This second printer works perfectly so far!  However, when I recieive a fax, the page has a very thick Black Line crosses the length (less than an inch from top and down) on the left edge. It almost seems to be a template for a fax page?  The first printer (a returned) did not do that, but it does not appear on the second printer.  In addition, the original page fax I sent to my friend and he said, that it doesn't have a thick black line on the fax page, he gets... and then he sent me along a return fax with this black line appears.

  Comment of thoughts,

  SyBerGuy

  Hello

  For more than a week since my last post. And I also had the printer connected to an outlet of power strip surge protector (never needed to connect directly to a wall, which I would have if I had a problem).  The problem has been resolved by replacing the large black ink cartridge, which was not printing text.

  In addition, earlier when I check the ink level, he showed the graphics still about 1/4 rest in the cartridge. I had also previously clicked on tell me when the ink level is low. None of this happened?  So now I have to watch closely what is printing a page of text clean/good.

  So for now, the printer is good to go and I hope not to have more problems... thank you for your help!

  Sy

• How to get rid of the black lines on the printed and scanned documents

  When I print, copy or scan on my officeject 6500 wireless I get a black line to the bottom of the page.

  While I wait for your answer, I'll post the most likely cause:

  Lift off the cover.  Now lift the document feeder cover, it opens to the left. You will see the mech feeder, you want to raise that to the left as well, it will increase by 2 inches or more. See this article from underneather glass it? Clean it. Really good.

  Then see you the white piece of plastic above the glass, which clean really good too.

  If it is a perfectly vertical line, in that it's probably caused by some dirt here, what is happening is the seat of bulb scanner in one place, the paper is then slipped over in the same place. If there is a grain of dust, it covers the entire page, top down. You clean the white room because there might be dirt there, when the bulb shines through the paper, he thinks returned as a dark spot.

• Thick vertical black line on the entire length of the page

  I have a HP LaserJet M1530 MFP Series PCL 6.  When I print normally there is no mistake in the image, but when I make a copy I have a thick vertical black line on the entire length of the page. The black line is about 2 inches from the left edge of the page. The problem is older than the current drum cartridge which was just replaced a couple of months. Never, the problem occurs with a normal printing, copy only and occurs with every copy without exception. Does anyone have any ideas/suggestions?

  Hello somedudeand welcome to the Forums of HP.

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

  I hope this helps!

• document feeder prints a black line down the Middle

  document feeder prints a black line in the middle of the page

  Yes, the warranty is still valid! I bought the extended warranty for the replacement. So I guess I will contact HP for a new printer.

  Thank you very much for your help!

  Ted

• Black line on the left side of the page

  I have a HP Laserjet 1018. The toner is old, there are about 3,000 pages.

  These days, I saw a black line on the left side of the page. The rest of the page is fine - faded streak.

  I took the toner and it has shaken for a few seconds, from one side to the other, but who has no good.

  Any recommendations?

  
  HP LaserJet p1102w

  1018 manual says that when this happens, the old toner drum is scratched and insert a new. I did, and the line has dissappeared,

  OK, there was more Ink toner, left, but after 3, 000-plus pages, I can live with having to replace it.

• All-in-one Officejet 4630: black lines at the copy and acanning

  Hello... I just bought this all-in-one today, and it is printing very well.  The problem is with the copy and scan.  No matter if I place the original on the scanner or the top of the page, the result is the same... sheet is covered with black lines of variable thickness, running up and down the page, while the details of the actual document are barely visible underneath (or colored lines if I select color printing).

  Not an expert tech by any means, so hard to solve this problem.  Have re-installed... rebooted the printer cartridges... try to print with a cartridge installed... nothing work so far.

  Any help or advice is welcome and appreciated!

  Hi @D_Corbs ,

  I see you got black lines during the scanning of the bucket and the ADF. I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If the problem persists, please update the firmware of the printer. E-all-in-one printer drivers HP Officejet 4630.

  If the problem persists, in 800-474-6836, please call our technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Contact HP.

  Have a wonderful day!
  Thank you.

• LaserJet M451dw: black line to the bottom of the page

  When I print a document, a continuous black line appears in the middle of the pages. The first 2 pages are normally well, but the rest of the pages have the black line.  I cleaned the printheads etc.  I hesitate to change the ink because there is more than half a cartridge left in all colors.

  It sounds like a faulty black toner cartridge.

  After printing open access toner and remove the cartridge and look at the drum and if there is a black line on the drum, then it would prove.

  If you have half left toner cartridge is still in warranty and you may be able to get it replaced.

• Why does my HP laserjet 1022 produced a black line on the right side of the page?

  Why does my HP laserjet 1022 produced a black line on the right side of the page? This occurs by using Word 2003, Photoshop, Acrobat etc. I don't get this with my Epson printer. My printer drivers are all to date. OS = Windows 7.

  Hello dqmcg

  Have you checked programs and OS - seemed to be OK, so did a new install of the printer. I have seems to now work OK - IE the files previously printed with lines now don't (only verified although some).

  I think that I was naïve in beliving Windows when he says that the printer and the driver were OK, and when I did a re-driver installation, Windows just used the file I already had. Also the "print test page" printer properties was always OK. Must have been very slight damage to the driver who showed up only with certain types of files of a few (different) programs.

  Thank you very much for getting my brain to work and begin to think logically.