Solution Center does not work under Windows 7 with Officejet Pro L7780

Downloaded the latest version of the software for Windows 7 and the first issue was when you try to do an installation complete you get a fatal error at the 96 percent mark when she did the configuration. I looked on the web and found a lot of posts on the same problem. Then, I just uninstalled and made a gradual installation.

Main printer DRIVER installed first. Then did the functions of imaging followed by the solution Center device.

Installed everything, but when you run the solution center it says it can't open because incomplete installation.

The printer works from Windows 7.

I have an XP machine and Solution Center working on it.

Any suggestions anyone.

Advertisement

This thread has resolved the problem installing the software that supports the HP Officejet Pro l7780 for use on Windows 7.

The event viewer showed mistakes that network location for %APPDATA%\protector.exe is not found.

Even if I couldn't run the original installation of solutioncenter.msi to work without errors in the log file, without making any changes, which has not completely solved the problem.

Since solutioncenter, initially did not work, I decided to run solutioncenter.msi manually and look at the log file. See errors in the log file we made changes to the database with Orca solutioncenter.msi. It took us on a long road that does not initially sense that HP would put something out there that produced errors in the msi log file.

I don't know how the setup.exe uses solutioncenter.msi?

The changes that doesn't seem it to matter when you run the setup.exe file that is provided in the download.

If I used the modified solutioncenter.msi or version orginal of it as downloaded from HP running setup.exe site had no importance regarding obtaining solutioncenter work in windows 7, canceled only changes in the solutioncenter log file errors.

I had to make the following changes to the environment variables to get the full package to work, but what is strange is that I could replace the changeed solutioncenter.msi or the original solutioncenter.msi and run setup.exe, with the following environment changes didn't matter. The solution Center has worked in Windows 7 using one of the solutioncenter.exe and setup.exe.

Apparently, setup.exe does not use the MSI directely. I think that HP responses suggested that in a previous thread.

Add these entries (click new...) for the owner user variables and System variables:

In the name box: APPDATA

In the value box: %USERPROFILE%\AppData\Roaming

 

Run setup.exe and event viewer does not display % APPDATA % Scriptures and all work.

 

Thanks for all help on this.

Tags: HP Printers

Similar Questions

  • HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

    I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

    At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

    I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

    I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

    I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

  • HP OfficeJet Pro 8500 A909: Hp Solution Center does not work for Windows 10 installed

    Since windows 10 my HP OfficeJet Pro 8500 A909 will not scan unless I run through the diagnostic tool and then do a test of loading scan. I used to do that through the HP Solution Center, but this doesn't seem to work. His charges and must charge bar but just Flash when you click it. I ran all online and diagnostics Windows, uninstalled and reinstalled on HP website and downloaded new drivers. It still does not work. Windows tells me that all drivers are up-to-date. Out of options.

    Hello

    Could be updated Windows 10 recently. Please check your history of updates of Windows 10 and remove/uninstall kb3132372

    Note: Microsoft is working with Adobe now:

    https://support.Microsoft.com/en-us/KB/3132372
       
    To uninstall this update, click Control Panel, click System and security, click on view installed updates in Windows Update, then select in the list of updates.

    Kind regards.

  • I have a Photosmart Premium c410 series. My hp Solution Center does not work, I can't scan.

    Operating system is Windows Vista, the error message says to reinstall the printer using the installation disc.  (I did several times).  Really need to scan, but don't know how.  States of printer to the computer.  This is not the case.  my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

    Hello judieKay

    Would you please provide the full model number? For example C410a. Some models are slightly different from each other and I want to assure you to give you specific information. How can I find my model number?

    Regarding the error, I checked and the following instructions should work on all models of the C410. The following instructions are for the "cleansing" or "cleaning" your computer HP printing software. This should allow you to perform a new installation of your printer and should fix your mistakes.

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download drivers and full software features

    C410 Photosmart full feature software (Vista)

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the L4uninstall.bat

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://get.Adobe.com/flashplayer/

    9 download drivers and full software features

    C410 Photosmart full feature software (Vista)

    10. run the download to reinstall the printer

  • Photosmart 6525: HP Solution Center does not work in Win 10

    I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

    Hello

    The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

    The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

    As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

    http://support.HP.com/us-en/document/c02463264

    Kind regards

    Shlomi

  • HP Solution Center does not work and I can't download it despite many trials

    my hp Solution Center does not work, I can not scan and I have tried several times to download a driver but it will not work.  I have a very frustrated by this and need someone to fix it please

    Hello todd999

    Try instead these instructions:

    Follow the steps below to rub the software and then reinstall it.
    1. open %Temp% and delete all the files in this folder. There may be some files that may still be in use, and you can ignore these files.
    2 download the full feature software and drivers
    Photosmart C7250 software (Windows 7)

    3. double-click on the downloaded file to extract the files
    4. once the software install window press Cancel or Exit to close the Setup program
    5. type % temp % in the field run or search programs and files.
    6 find the starting with 7z folder (example: 7zS2356)
    7. right click on 7z file and choose copy
    8. close the window by %temp% and then right click in the middle of your desktop and choose Paste
    9 open the 7z folder
    10 open the Util folder
    11 open the CCC folder
    12 run the Uninstall_L4 and then follow the instructions on the screen to remove the software.
    13. when the software has been removed, restart your computer
    14. run the Accessories\ System Tools Disk Cleanup
    15 open the 7z desktop folder and run the setup.exe file to reinstall the printer.
    I would like to know if you still have the same issues?

  • Reference software does not work under Windows 7

    Reference 9, a bibliographic database program, does not work under Windows 7.  It worked fine under XP.  Support of reference people were a great help and I'm stuck with the program so far.  The program opens and can be saved, but when you do a search, the first research work, but a second search will generate a message 'quote has stopped working.  A problem caused the program to sop work correctly.  Windows will close the program and notify you if a solution is available. "Then you must click on the" close program"button to close the program and then re - start.

    Are you sure that all the prerequisites for the program have been installed (like the .net Framework or VC ++ runtime libraries)?

    In addition, is the version of the reference program tested by the people of tech reference that same as you use?

    Please make sure the version of the program made for Windows 7 is available, and if yes, you can use this version of Windows 7.

    A work around:

    If the program fails to work, even if all prerequisites have been installed, you can try to install the software in Windows XP Mode (not recommended, but we can not miss this in the case of legacy programs). You can take a look at the following links:

    http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=8002

  • application of foxpro for Dos does not work under Windows 7 Home Premium 64-bit

    Dear Expert help me!

    My foxpro for Dos application does not work under Windows 7 Home Premium 64-bit. Please advice me! How can I do for running under Windows 7 64-bit

    waiting for early response
    Thank you and regards

    SAIF Ali Sabri
    Faisalabad, Pakistan
    E-mail address is removed from the privacy *.
    + 923007960782

    16-bit applications are not taken charge/does not not on 64-bit Windows

  • The ADF Mobile preview pane does not work under Windows 8.

    The ADF Mobile preview pane does not work under Windows 8 64-bit even I use Jdeveloper 11.1.2.4.0 version, but I use windows 7 64-bit or windows xp works fine.

    How to solve this problem, please.

    Thank you!

    Hello

    I installed JDeveloper 11.1.2.4 on my machine Windows 8 and the extension of the ADF Mobile. I can open the ADF Mobile Viewer. There is therefore no problem with this on Windows 8. I used the generic facility, which is that I have installed the JDK and then run the command for installing JDeveloper Java-jar.

    Frank

  • HP Solution Center does not work after installing Windows 10.

    After 10 Windows Installer, Solution Center HP, which is part of the installation of software for my HP Officejet 4500 510nz, tells me that the software is incomplete. The installation disc does not open, so I downloaded the HP program and re-installed. I always get the message that the software is incomplete. HP says they no longer support this printer (bought 24/05/14 - May 25/09/13!) - WOW! ~ printer still print, but will not run the other functions such as scanning, etc., because the HP Solution Center does not start, and HP has abandoned in favor of their product.

    Now what? Should I buy a new printer to replace this year 1 old HP so I can use its features with W10?

    Or, is there a way to fix it?

    This thread has been locked, for more information on HPPIW, please refer to the following support document:

    http://support.HP.com/us-en/document/c02681060

    HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

    To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

  • Photosmart 2575: HP Solution Center does not work

    I recently got a new PC with Windows 8.1.
    After installation of my printer HP 2575 (purchased in 2006) with the Setup file recommended AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I discovered that the HP Solution Center did not work.
    I received the message that the printer was not found.
    But printing works perfectly, so that the part of the installation was successful.
    I tried to uninstall and reinstall the printer in many ways, including:
    -Uninstall using Uninstall_L1.bat, Uninstall_L2.bat, Uninstall_L3.bat, with reboot between the two.
    -Installation of the printer driver just in a first time, then installation of the center of HP solutions after reboot.
    The result net is now HP Solution Center shows "HP Solution Center cannot start because your device is incomplete." When I try to start it (so it's even worse than before).
    V4.7.0.29 HPPSdr.exe print and Scan doctor says, "a later version of the program is available for this product.
    When I use HPSupportSolutionsFramework - 11.51.0049.msi to identify the right driver, I get the same AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe driver file that I have already installed.
    Let HPPSdr.exe begins to extract what he considers the right driver gives the file AIO_CDB_2570_Full_Win_WW_140_408 - 4.exe I already downloaded.
    I have not actually tried to use the downloaded file, because the download crashed when only a few MB left.

    @Carl-H,

    Welcome to the HP community!

    I will do my best to make some useful suggestions in order to get the Solution Center installed and running on your system Windows 8.1. Please first test best in the printer, as this will show us if there are hardware problems, what could be the cause of all the failures of software.

    If copies seem to be working, try the following steps:

    1. perform a clean boot, restart the PC and try to run the installation.

    2. use the tool File Checker system for lack of repair or corrupt system files , run the scan to find the files corrupted on your computer. You can run the scan up to three times to see if he'll get all the bugs.

    3 cancel the registration and re - register the Microsoft Windows Installer service:
    1. click on the Start menu and type "cmd" in the search field and press ENTER.
    2 type "msiexec /Unregister" and then press ENTER.
    3. Type "msiexec/regserver" and then press ENTER.
    4 reboot your PC and try the install again.

    4. create a new profile user account with administrative privileges on your PC and run the Setup from there to see if it is correctly executed.

    Let me know the results, good luck

    Say thank you for the answer by clicking on the thumbs upwards

  • Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

    Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

    Hello

    Microsoft has since released a new update for this problem.

    Fix solution:

    Please download and install the following update KB3133431 from Microsoft:

    https://support.Microsoft.com/en-us/KB/3133431

    Note This update is available through Windows Update only. (Updates )  must be lit)

    1. Click the Start button, select 'Settings' and select 'Making day & security'
    2. Under "Windows Update", select "Advanced Options".
    3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

    Hope that helps.

    Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

  • 4500 wireless: HP Solutions Center does not work since the upgrade to windows 10

    Hello

    My solution Center no longer works since I've upgraded to windows 10.

    Thank you

    Welcome to the HP community @DJHar,

    I understand that the Solution Center Software no longer works since you have upgraded to Windows 10, and I wanted to reach out for help. I would say firstly under the HP printer install wizard for Windows, that will find the drivers and software for your Officejet 4500 Wireless and install the correct software for Windows 10. Try the software for access later, and it should work.

    Let me know the results!

    Good luck

  • HP Photosmart Premium C309g-m: HP Solution Center does not work

    Improved win7 to Win10 House and it worked all fine until a few weeks ago.  Now when I open the HP Solution Center, the drive vibrates for a while, I see HPqdirec.exe (32 bit) process for a second in the Task Manager (not all the time but that could be just instant calendar), the Bell PC bumps (each time) but the window does not open.  There is no error message, no even if I run it from a command prompt window.

    I tried to uninstall the HP printing software (originally installed in Win7) - he asked me to restart the PC to continue the uninstall - but then he pointed out a mistake and said: he has failed.  Now when I try to uninstall it, it has no installed components.  I have correctly installed the latest PS_AIO_06_C309g-m_140_408 - 5.exe and the printer works but not the center of the Solution.

    The only recent software change that comes to mind is that I went free Avast antivirus with AVG free.  Do not know if the symptoms coincide with this change.  Disable AVG has no effect.

    I have uninstalled & installed the latest version of Adobe Flash player, but that makes no difference.

    I tried pressing Alt-space but nothing happens or who does not work in Win10.

    Edit: uninstall Microsoft Update https://support.microsoft.com/en-us/kb/3132372 allows to run, but he now realizes that my installation is incomplete. Re-run the installation of HP's...

    Hello

    Microsoft has since released a new update for this problem.

    Fix solution:

    Please download and install the following update KB3133431 from Microsoft:

    https://support.Microsoft.com/en-us/KB/3133431

    Note This update is available through Windows Update only. (Updates )  must be lit)

    1. Click the Start button, select 'Settings' and select 'Making day & security'
    2. Under "Windows Update", select "Advanced Options".
    3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

    Hope that helps.

    Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

  • HP Solution Center: my HP Solution Center does not work

    My Center solutions HP for HP Photosmart Wireless e-All-in-one printer - B110a does not work. It worked perfectly until a few days ago...

    The message says:

    "HP Solution Center cannot work because your device installation is not complete.

    Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

    "If it does not complete the installation or if you do not have the CD, access the HP help by clicking on the start menu files.

    I tried to download the software from HP but without success.

    I don't have the CD to reset the printer.

    Any solution?

    Thank you very much

    Hi @Farigola,

    Welcome to the community of HP.

    I understand that you can not use the computer Windows 10 HP Solution Center. I will do my best to help.

    Here is a link to a few troubleshooting steps that I recommend you try. When you open the link, scroll down to the section titled ""HP solutions Center can not run"or"Scan is busy or in use"error with a network-connected printer»

    HP printers - upgrade Windows 10, printer problems occur after the

    Please, try the steps and get back to me with the results.

    If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps. Have a great day.

Maybe you are looking for

  • Is this possible... Wired and guess the networking

    I have an Apple Airport Extreme point and that you want to configure to function as a network cable for my desktop Mac and PC but also as a separate for some mobile devices wireless network... Is is possible to have two separate networks to networks

  • G 430 W Lan problem

    I have Lenovo 3000 G430 laptop, I used Windows 7 32-bit before, but now I upgraded to 64-bit, now the problem is that my Lan & Bluetooth drivers are not getting recognized despite them installed from the support page. It says "W Lan Switch located in

  • Parameters of the model in DC (Multisim) one analysis operation points

    I have a simple circuit of the series with a current source continuous, the resistance and the LED. I am trying to add the current led to the list of parameters of device to report in an analysis of the operating points, but when I select this settin

  • Windows sending problem - HELP!

    Everything worked very well until they sent an email with a Word document, including photos. This email took a time and then everything just disappeared.  It is not in the drafts box, box has sent or Outbox.  He disappeared and since then I can not s

  • Windows 7 freezes on the login screen

    I recently encountered a problem on the login screen. When I start my laptop, everything freezes. If I boot in safe mode network, it does the same thing. However, the command-line safe mode and normal safe mode works very well. This isn't a hardware


HashFlare